It all worked up until pulling the key out and pressing the buttons to get the lock to operate and that doesn't work. Update: fixed mine now the problem was the battery in the remote the ones I got must have been faulty. Got new battery from B and Q and it works great.
A great video. I followed your instructions and the keyfob now works. Thanks.👍 I also bought a new keyfob off Ebay as a spare and followed the same process.... But it won't work. I have tried a second battery in the remote to eliminate that possibility. With it being a new fob, do I have to have it programmed first? Any help would be much appreciated. Thanks.
Fantastic tutorial, thanks for sharing. Where on earth do you guys get these steps to do this type of job from? Im very new at auto locksmithing, ive subscribed to your channel, thanks again mate.
Great video There is another key fob that look like original litttle bigger that selling in aliexpress and there the seller offer no chip or h chip or g chip and there is no explation on the chip. I can take the no chip?
PRESS and release both LOCK and UNLOCK buttons on the remote transmitter. PRESS and release LOCK button on the remote. Then do exactly the same using the 2nd key, during the same process.
Hey, thanks for the video! I have managed to loose my original remote on a run and then within a week (before I made a new spare) the transponder chip fell out of my spare. So now my car is stuck at the parking lot at work (not the safest place). I got two new blank remotes and cut them to the spare. I even got the cable to connect the car to my laptop and a licence for Toyota Techstream. But I'm afraid I won't be able to do anything without a key that has a transponder already "paired" to the car / immobilizer. Do you think I can pull it off somehow? I'm moving house and really don't have £240 to spare at the moment... Many thanks (I'm buying a pint whenever you're in Sheffield! :D )
Hi I've recently purchased a new 2 button remote for citroen c1 09 reg from Amazon, and it doesn't seem to work using the door open, close programming shown in your tutorial. Can you suggest some where I can purchase a 2 button key to programme. Kind regards Darren
Hi, did you figure out the answer to ID 46 or ID 70? I'm now having the same question. The internet mostly suggests ID 70. Although, with my little experience, I can't be sure about it except if I buy the ID 70 chip and try it myself..
You know this is just to re sync the remote right? It has nothing to do with key coding. The chip would be ID70 p.33, p.53, or p.83 depending on what key position. All aygo, C1 and 107s are the same in this year range. Definitely not ID46
@@Cityautolocksmith803 Thanks for your reply. I'm trying to gain knowledge. Right now I have the two original keys. One controlling the doors remotely, the other (spare) key is just with the transponder chip. I want to use the transponder chip from the spare key on a new key with a ID70 chip/logic board. From what I read on the internet, this procedure might work to program a new key with an existing transponder chip but with a new ID70 chip/logic board. Is this incorrect? What does the p.33, p.53 and p.83 refer to in your message? And last thing, I know for Toyota there's a cheap way to program keys through software with mini VCI cable, it's called Techstream. Do you know if this software is compatible with Peugeot 107? It doesn't provide Peugeot 107 in the list of models. However, I was wondering if it would work if one selects Toyota Aygo in that software due to the citybug cars coming from the same factory. Do you think this will work? Do you have a similar software for Peugeot 107? I'm sorry for all these questions, I'm trying to understand the process well. I want to make myself happy with a 'flip' key upgrade.
Also, if you're taking the key out of ignition to press the button, don't. Likewise if your not taking it out then try with it out. Some cars require key in and some require key out
does this also work with the immobilizer? my remote broke, or at least the buttons on it, so i ordered a complete new one, but now the immobilizer doesn’t let me start the car, even tho i have this little black ceramic thing in it
After NUMEROUS videos of people giving the completely wrong info on how to do this I have found you, what a legend thank you!
Pleased to help
Yes is working i made it now :)
Works fine !! Was Done in 2 minutes
Thanks for your video, nice and clear. New remote can lock and unlock the doors, however won't start the engine...
Chip to start is a different process
Seems daft all the door opening and closing but it worked a treat...top video
Najlepszy filmik na TH-cam 💪 proste tłumaczenie. Jestem Ci bardzo wdzięczny, dziękuję ❗
Pleased to help.
could you explain how to do for having a copy key to start the engine? thanks best regards
Unfortunately I cant share that info over a public platform, sorry
It all worked up until pulling the key out and pressing the buttons to get the lock to operate and that doesn't work. Update: fixed mine now the problem was the battery in the remote the ones I got must have been faulty. Got new battery from B and Q and it works great.
Got the same problem
Brilliant thank you so much for sharing your expertise
You're welcome
Just sent this video that replaced the buttons on the fob, hoping it'll help him :D
Let us know how you got on
A great video. I followed your instructions and the keyfob now works. Thanks.👍 I also bought a new keyfob off Ebay as a spare and followed the same process.... But it won't work. I have tried a second battery in the remote to eliminate that possibility. With it being a new fob, do I have to have it programmed first? Any help would be much appreciated. Thanks.
Providing you have a working key the fob should work. I never buy anything car key related off of Ebay as this problem happens a lot
@@Cityautolocksmith803 Thanks for the info.👍
Thank you man!
Hello !! I’ve an ECU fault on a 107. Do you know if coded in the ECUS. Thinking swapping over ECUS from another 107. Many thanks
Perfect. Cheers matey. Worked perfect.
Does it work with a new key fob
Fantastic tutorial, thanks for sharing. Where on earth do you guys get these steps to do this type of job from? Im very new at auto locksmithing, ive subscribed to your channel, thanks again mate.
I've been doing this job for over 15 years, surprising the things you pick up along the way
Worked great ! cheers mate
will this work if I don't have the original car remote? I have a remote that used to work but it's a copy
Should do
Great video
There is another key fob that look like original litttle bigger that selling in aliexpress and there the seller offer no chip or h chip or g chip and there is no explation on the chip.
I can take the no chip?
It is an id70 chip for this usually. I wouldn't buy any keys from aliexpress. This procedure is only to code remote, not the chip to start the car
Hi, if you have to add 2 remotes. Do you have to do each one separately? Or press buttons on both remotes? Thanks
PRESS and release both LOCK and UNLOCK buttons on the remote transmitter.
PRESS and release LOCK button on the remote.
Then do exactly the same using the 2nd key, during the same process.
Hey, thanks for the video!
I have managed to loose my original remote on a run and then within a week (before I made a new spare) the transponder chip fell out of my spare. So now my car is stuck at the parking lot at work (not the safest place). I got two new blank remotes and cut them to the spare. I even got the cable to connect the car to my laptop and a licence for Toyota Techstream. But I'm afraid I won't be able to do anything without a key that has a transponder already "paired" to the car / immobilizer. Do you think I can pull it off somehow? I'm moving house and really don't have £240 to spare at the moment... Many thanks (I'm buying a pint whenever you're in Sheffield! :D )
Sorry for late reply. You needed an autolocksmith for this job, as you most likely know know anyway
The remote fob you programmed, was it a new one from internet with electronics and transponder?
I'm a locksmith so all stock brought from reputable dealers. Transponder was coded, then remote as demonstrated
@@Cityautolocksmith803 are the transponders pre-coded when you get them?
No, need a pin code and a programmer to code to car
@@Cityautolocksmith803 cheers
Thanks for sharing this 😁👍🙏☺️😊😌
My pleasure 😊
Hi I've recently purchased a new 2 button remote for citroen c1 09 reg from Amazon, and it doesn't seem to work using the door open, close programming shown in your tutorial. Can you suggest some where I can purchase a 2 button key to programme. Kind regards Darren
If its 100% the right key for the year it will work. Unfortunately not all c1s have remote locking as standard so you may have one that doesn't?
thank you. how can I activate a new key with the only transponder (without buttons)? aygo now connect. thanks
Excellent video. Where can you buy spare new remotes from?
I'd only trust dealer or an autolocksmith
And tha k you
Do you know how to do this with keyless remotes like the Citroen C3 Aircross one ?
I bought Citroen/peugeot remote key boards for Toyota aygo and they don’t work thought they r the same is that the reason?
They are thee same, need to make sure your car has remote locking function as not all of them do
Can you use a second hand key and reprogramme it?
No
where did you bought your key electronic ?
I'm a autolocksmith I buy from key suppliers
It workes a few times and cycles and then it doesn't work after the code mode ends 😢
Tyvm!
Hi there, is this the same for a peuguot partner tepee 2008?
No, different process. This is a toyota system
Doesnt work for me. Did follow the steps. But idk what am doing wrong someone can help me?? Already changed battery
Your car may not be fitted with central locking?
Hi.
Should the new key be named? ID 46 or ID 70 chip?? Become the chip also code??
Sincerely.
Hi, did you figure out the answer to ID 46 or ID 70? I'm now having the same question. The internet mostly suggests ID 70. Although, with my little experience, I can't be sure about it except if I buy the ID 70 chip and try it myself..
You know this is just to re sync the remote right? It has nothing to do with key coding. The chip would be ID70 p.33, p.53, or p.83 depending on what key position. All aygo, C1 and 107s are the same in this year range. Definitely not ID46
@@Cityautolocksmith803 Thanks for your reply. I'm trying to gain knowledge. Right now I have the two original keys. One controlling the doors remotely, the other (spare) key is just with the transponder chip. I want to use the transponder chip from the spare key on a new key with a ID70 chip/logic board.
From what I read on the internet, this procedure might work to program a new key with an existing transponder chip but with a new ID70 chip/logic board. Is this incorrect? What does the p.33, p.53 and p.83 refer to in your message?
And last thing, I know for Toyota there's a cheap way to program keys through software with mini VCI cable, it's called Techstream.
Do you know if this software is compatible with Peugeot 107?
It doesn't provide Peugeot 107 in the list of models. However, I was wondering if it would work if one selects Toyota Aygo in that software due to the citybug cars coming from the same factory. Do you think this will work? Do you have a similar software for Peugeot 107?
I'm sorry for all these questions, I'm trying to understand the process well. I want to make myself happy with a 'flip' key upgrade.
Tried multiple times with no result.. any idea what I can do?
Car may not have remote locking. Not all models have it as standard
@@Cityautolocksmith803 how can i be sure it has or not?
The fact this process isn't working suggests the car doesn't. Just check you're doing it correctly as well
Also, if you're taking the key out of ignition to press the button, don't. Likewise if your not taking it out then try with it out. Some cars require key in and some require key out
Coao ma funziona anche citroen c3 2003?
This isn't the right way for a c3. Check out my other peugeot/citreon re sync video
No, this car is a toyots system
Check out my other videos
Mate can you help me, my remote doesnt seem to respond, i changed the battery, i got to this programing mode but it wont lock or unlock, any advice?
Check key is sending signal in a shop
I checked, i does transmit signal
does this also
work with the immobilizer?
my remote broke, or at least the buttons on it, so i ordered a complete new one, but now the immobilizer doesn’t let me start the car, even tho i have this little black ceramic thing in it
The chip is separate and will be in old key