Charles Christena as I watched I questioned the quality and when he tossed it in the bin I would have done the same, a good learning project but definitely worth doing again!! Very cool. 😎
Your video with the forged carbon helmet popped up in my recommended and from that I have seen have seen half of your videos.Your doing an amazing job dude.
When doing a complex contour, like in this case the hole for the oil filler cap (cylindrical contour), place the carbon cloth that lines the hole first, then place the carbon cloth for the rest of the surface. This way the cloth seam of the horizontal flat surface covers *over* the seam of the profile structure for the hole for the oil filler cap. When re-using a skinning "mistake" as a mold for the part instead, you *HAVE* to strengthen it first. Either fill around the your newly re-purposed template mold with chopped fiberglass filler-putty or use something like polyurethane spray-foam to build up & strengthen the structure. You will be surprised how much better the resulting part will end up looking from simply making a slightly stronger mold.
I like how simple your videos are with no music and no narrating. Simple yet effective. Earned a subscribe 👍🏼 Ps. I wish I knew how to do all of that too, or knew how to learn it 😭
Hey man that's definitely a worthy piece to hang on the wall of your garage or workshop! Anything you put time and energy into is worth holding onto unless it's literally junk and sir that carbon cover with minor defects isn't junk! Keeping my work around both fails and successful stuff helps me come up with other ideas to make me better! I can't wait to see your other work bro!
I suggest you could use the Forged carbon fiber to make an engine cover. It can full in those words better than carbon fiber cloth, especially to express the details.
Is there a chance you one day can show us how to make a carbon motorbike fairing ? I understand there is a lot of skill and knowledge in your work.’ Looks great 👍
Brian Bak he’s still learning brotha He has a long ways to go. A part like this should’ve been made from a mold in the beginning, there’s too many details to do an overlay. I wouldn’t learn to make a part from him, being honest
I'm going to do one soon. I don't have a TH-cam channel yet but it'll be my first video when I get round to it. I'll update this post when I've uploaded the video. Will be doing ALL fairings for a Daytona 675 + huggers etc 👍
Hippocks Thats great.! I will look forward for your reply.! I am thinking about modifying my faring on my Fireblade with my 3d printer and one day hopefully make it carbon after your video 👍
I think no ones need explication about : your way better taking your time and do it properly the first try, than having to repeat the whole process twice........ and I don’t meant this as waisting time, but for what’s worthing the price of real carbon fibres materials. But what a results 👍👍👍👍😍
I'm trying to do something similar but with a BMW m5 dash trim but can't because of the clips and attachment points on the back, with figure it I guess, need to call easy composite
Hello, Buddy! I haven't actually installed it. It wasn't the good quality I wanted. So if I have the chance, I will make it new. Please wait for it. Thank you for watching.
ECO-LAP Studio I’ll wait, and watch it!! I wish I could do this parts myself for my E82 N55!! Tgat way I don’t have to overpay the “BMW tax” for some parts for a BMW!! 😂
Hello, Buddy! I originally planned for skinning and had a new try. So I used Elastibag. But it was not satisfactory So I changed the plan and used it as a mold. I hope you helpful.
+Doru Matei Hello, Buddy! I used standard epoxy resin. Epoxy resin is vulnerable to heat as you care. Muffler or engine parts should use high temperature epoxy resin. However, when I repaired the carbon engine cover with standard epoxy resin, It had no problem. So I used a standard epoxy resin. I will let you know if it has a problem. Thank you for watching
Hello, Buddy! th-cam.com/video/ri1JnCoswOE/w-d-xo.html Please, Check this URL. You can watching the video that making a vaccum pump. I hope you helpful.
What clear coat would you use that will not cause yellowing from heat? My engine cover eventually turned yellowish though not cracking or de-laminating. Thanks.
Hello, Buddy! I am also looking for clear paint to avoid yellowing. But it couldn't be found around me. If you can find it, let me know too. Thank you for watching.
Ignant Foo it will always yellow, even if u have high heat temp resin, because the constant heat from the engine. If u use cheap resin it will turn yellow faster
I really enjoyed watching that while I gather knowledge for making my own CF race car parts. Do you reccomend anywhere for buying carbon cloth please? And keep posting dude 👍
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/
If you're in the states I buy the majority of my cloth and a few other supplies from fiberglast.com No affiliation. Have been prepping track cars and fabbing up parts for a little over 20 years. It's a fun and rewarding process, especially making one-off pieces. If you are serious about producing parts on that level, be sure you have plenty of plugs and moulds of the pieces that often get damaged and take abuse i.e. splitters, undertrays, diffusers, etc. You can make a good living if you're dedicated and turn out quality parts. Good luck!
What is the brand of the clear coat spray that you used at the end, and the rest of the materials that you are using when can they be bought, do you get your materials from a website?
By the way, where is the new engine cover with a different approach to work ? I just have an order for a Mercedes brewing, also a lid, so I would like to see another option! I personally see that it is necessary to remove the matrix from the original, moreover , from both sides , since there are also fasteners there , and then according to the technical process ! Thanks !
I made and used a small vacuum chamber. youtube/ri1JnCoswOE?t=234 You'll watch it on this link. The vacuum pump is for closures Vacuum I prefer things that are easy to get without spending a lot of money. ^^ I hope it helped you.
Hello, Buddy! I probably painted clear coats three or four times. Polishing is an option. If you can paint in very clean place with no dust, you probably don't need to polish. However, be very careful when painting clear coats.
What grit sand paper are you using to remove the paint? A detailed description would be nice when you do these videoed so people can follow it step by step
Hello, Buddy! I had no paint remover so I removed the paint with sandpaper. It was very difficult to remove the paint with sandpaper. The sandpaper I used to remove the paint is P220 ~ P1000. Thank you for watching.
Merci pour tes vidéos c'est vraiment top. Je suis en cours de toutes les regarder. Pourrais tu ajouter dans descriptif des liens de l'endroit où tu achète t'es différent composant ? J'aimerais aussi que tu explique comment cela ce passe pour ton système sous vide. Pour info, plutôt qu'utiliser ta pompe à main, tu peu inverser les polarité d'une pompe d'aquarium. Merci beaucoup 👍
Hello, Buddy! I bought materials from a Korean online shop. However, Korean online shops do not ship overseas. So I'm going to show you an online shop in the UK. Maybe you can find what you want. www.easycomposites.co.uk/ The vacuum is.. Simply put, carbon fiber is attached to the mold and air is removed using a vacuum pump. Carbon fiber is cured in the shape of a mold by an epoxy resin. I hope you helpful.
Hello, Buddy! I haven't actually used this. Please watch the end of the video. It wasn't the good quality I wanted. So I planned to make a new one, but I was busy recently and couldn't make it. I will make it good quality again when I get a chance.
Ok so i have a important question. I am going to be doing this engine cover soon. SO instead of using the epoxy black gel coat, which makes the carbon stick, Can I use a spray adhesive instead?? I have seen people do it this way...
Hello, Buddy! You have two options. One is to mold the engine cover by making a mold. Spray adhesive cannot be used when making molds. You must use a gel coat. Another thing is skinning. You can also use spray adhesive when skinning. However, I think it is better to use gel coat than spray adhesive. I hope you helpful. Thank you for watching.
Yamaha Rapt or why do u want to use spray adhesive? As soon as u put resin to the adhesive it will move and lift, it does no good for holding carbon down for an overlay project
Yamaha Rapt or listen If u want the fiber to stick without a spray adhesive use the resin itself, pigment it black or use black gelcoat the wait until it gets to B stage, another-words until it gets really tacky. Once tacky carefully place the carbon on top gently pressing it into the resin. Once you have it where u want wait until the next day to start coating it. This is all if u want to do an overlay👍🏾
should have used acetone on the paint to see if it would come off , I have made that mistake when making the mould, if the paint didn't come off you didn't need to sand the paint
Hello, Buddy! I used multiple layers of wax and PVA for easy demolding. However, PVA does not have a clean surface. It is recommended to use only release wax.
RTM Vacuum Bagging Film www.ebay.com/i/223440964602?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=223440964602&targetid=935694487906&device=t&mktype=&googleloc=9031738&poi=&campaignid=10877432047&mkgroupid=112821775411&rlsatarget=pla-935694487906&abcId=9300402&merchantid=115039991&gclid=CjwKCAjw2dD7BRASEiwAWCtCb--K5gh6V5O_TkyPd7ZFsF455Zgi8PNXJNBCpt6rrPXQYysuR64BshoCHcMQAvD_BwE
E for effort, bro ! Make another one with proper stand-off's for the attachment points. I'm thinking 2 molds will be needed, one for each of the front & back sides. Then epoxy them together !
Hello, Buddy! I did not use a special vacuum bag. I used a vacuum bag and pump for clothing. I think you can easily find this ^^ Thank you for watching.
Hello, Buddy! Thanks for the advice. I planned to make another fiberglass mold. However, there are many other tasks, so the new engine cover work has been delayed. If you wait, I'll make a good engine cover(Ver. 2). Thank you for watching.
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](http://i.ytimg.com/vi/YNWu1-r5HGo/mqdefault.jpg)
![DO NOT MAKE CARBON FIBER PARTS AT HOME (Making Charge Pipes) [DIY] with CR-Scan Lizard](/img/tr.png)
![Carbon Fiber Table with Epoxy Resin [DIY]](http://i.ytimg.com/vi/Pc6Y1uhDj80/mqdefault.jpg)
![How to Make a Forged Carbon Fiber Engine Cover [DIY]](http://i.ytimg.com/vi/tHLCqQFDZjU/mqdefault.jpg)
![[LIVE] : ONE ลุมพินี 73 | คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
I'm glad you have a high bar for quality. Most people would have called it done on the first attempt.
Charles Christena as I watched I questioned the quality and when he tossed it in the bin I would have done the same, a good learning project but definitely worth doing again!! Very cool. 😎
I wouldn't have even clear coated it. Looked absolutely trash out of the mould
This is like ASMR for car people.
Yeah but better
This is. Car people ASMR.
Your video with the forged carbon helmet popped up in my recommended and from that I have seen have seen half of your videos.Your doing an amazing job dude.
When doing a complex contour, like in this case the hole for the oil filler cap (cylindrical contour), place the carbon cloth that lines the hole first, then place the carbon cloth for the rest of the surface. This way the cloth seam of the horizontal flat surface covers *over* the seam of the profile structure for the hole for the oil filler cap.
When re-using a skinning "mistake" as a mold for the part instead, you *HAVE* to strengthen it first. Either fill around the your newly re-purposed template mold with chopped fiberglass filler-putty or use something like polyurethane spray-foam to build up & strengthen the structure. You will be surprised how much better the resulting part will end up looking from simply making a slightly stronger mold.
making a carbon fiber mold, thats gangster shit lol
I like how simple your videos are with no music and no narrating. Simple yet effective. Earned a subscribe 👍🏼
Ps. I wish I knew how to do all of that too, or knew how to learn it 😭
Hey man that's definitely a worthy piece to hang on the wall of your garage or workshop! Anything you put time and energy into is worth holding onto unless it's literally junk and sir that carbon cover with minor defects isn't junk! Keeping my work around both fails and successful stuff helps me come up with other ideas to make me better! I can't wait to see your other work bro!
I do love abit of carbon fibre, but that white engine cover is stunning!
Wow great work. I thinking maybe to do this to my motorbike one day.!!
I suggest you could use the Forged carbon fiber to make an engine cover. It can full in those words better than carbon fiber cloth, especially to express the details.
정말 대단합니다. 한수 배우고 싶어요..
사이드 미러 커버 하고 몇가지 카본 다이 하려다가 깜놀 실력에 ...
급 사이드 미러 포지드 카본으로 해보고 싶은 충동이 ...
Starke Leistung👍🏽 Macht echt Laune zuzuschauen. Mach weiter so
카나드 만드시는거 보고 나머지도 다보고있습니다 멋지세요👍
중독성있게 보게되는^^!!!
Never give up bro keep going.
Btw it looked great I tell you.
정말 대단한거 같아요ㅎ 작업공간도 공간이지만 깔끔하게 할수있는 공정이 아닌데도 불구하고 놀랍습니다
아직까지는 카본을 혼자 배우고 공부하는 단계라고 생각합니다.
더 실력을 쌓아서 저 크고 멋진 작업을 하고 싶습니다~ 좋게 봐주셔서 감사합니다~
Great work every stuff, keep it up. I like it. ❤
New subscriber. Loving the videos. Keep it up
Your job is amazing, Why i didnt see your channel before,
Professional !
Is there a chance you one day can show us how to make a carbon motorbike fairing ? I understand there is a lot of skill and knowledge in your work.’ Looks great 👍
Brian Bak he’s still learning brotha
He has a long ways to go. A part like this should’ve been made from a mold in the beginning, there’s too many details to do an overlay. I wouldn’t learn to make a part from him, being honest
I'm going to do one soon. I don't have a TH-cam channel yet but it'll be my first video when I get round to it. I'll update this post when I've uploaded the video. Will be doing ALL fairings for a Daytona 675 + huggers etc 👍
Hippocks
Thats great.! I will look forward for your reply.! I am thinking about modifying my faring on my Fireblade with my 3d printer and one day hopefully make it carbon after your video 👍
최고최고!!!^^
I seriously cant stop watching these lmao.
Концовка огонь😄👍
Geil gemacht!
대단하십니다. 카본 DIY 실습강좌 오프라인으로 한번 열어주세요^^ 눈에 보이는 모든 걸 카본으로 씌우고 싶네요 ㅎ lol
Looks very good. 👍
I like your way and your work Bravo
Keren om 👍nice tutorial 🥰
Hey man I'm trying to do he same thing, just one question:
Why did u use the first time Vacuumfoil and the next vacuumprocess a vacuumbag?
respect your hustle
질문있는데 여름에는 엔진룸 내부 온도가 300도 까지 올라간다는 말이 있던데 그러면 엔진룸 내부에 장착한 카본 제품의 열변형 문제는 없었나요??
grandeeee!!!! :-)
Do U know how BMW makes open core carbon pieces like in M2 Competition interior trim?
Good channel... the end of video always make me supprise lol.. always funny video
I'm glad you enjoyed my video.
Please, look forward to next video!!
Thank you for watching.
Still looked good
Hi would be good to know what brand of epoxy and hardener your using.
Can you list them please.
Hello! Good job!
I do not understand, why did you take off the paint? It was possible to apply wax directly to the paint, could it not?
If you use the oem cover as a mold, why did you sand off the paint?
I think no ones need explication about : your way better taking your time and do it properly the first try, than having to repeat the whole process twice........ and I don’t meant this as waisting time, but for what’s worthing the price of real carbon fibres materials. But what a results 👍👍👍👍😍
곧 구독자 200만 되실듯
+richard hong 일단 1천명부터...........
Can i buy the not used engine cover just to get it on a shell ?
great job and fantastic channel, How did you make the hand vacuum pump?
A truely Carbon Fiber Maniac.
I'm trying to do something similar but with a BMW m5 dash trim but can't because of the clips and attachment points on the back, with figure it I guess, need to call easy composite
My new teacher is right here
일단 fpr로 겉면 몰드를 뜨고 그 위에 발라서 만들란거죠?
Love this fucking guy, great craftsmanship, subtle humour. Fuckin gold brother.
I wish I could get some of my interior pieces done
It looks really nice. I would had installed it anyways. Then, create another with better quality.
Hello, Buddy!
I haven't actually installed it.
It wasn't the good quality I wanted.
So if I have the chance, I will make it new.
Please wait for it.
Thank you for watching.
ECO-LAP Studio I’ll wait, and watch it!! I wish I could do this parts myself for my E82 N55!! Tgat way I don’t have to overpay the “BMW tax” for some parts for a BMW!! 😂
I look forward to seeing v2.0
Why did you used the Elastibag here?Does it give a smoother surface?Is it better then regular vacuum bag?
Hello, Buddy!
I originally planned for skinning and had a new try.
So I used Elastibag.
But it was not satisfactory
So I changed the plan and used it as a mold.
I hope you helpful.
pero eso aguanta altas temperaturas?
Have you used high temp resin ? It will last with standard epoxy ?
+Doru Matei Hello, Buddy!
I used standard epoxy resin.
Epoxy resin is vulnerable to heat as you care.
Muffler or engine parts should use high temperature epoxy resin.
However, when I repaired the carbon engine cover with standard epoxy resin, It had no problem.
So I used a standard epoxy resin.
I will let you know if it has a problem.
Thank you for watching
Donde se podria comprar el carbono y los.materiales para hacer los moldes?
Very cool stuff and you did on a budget. How did you make the vacuum pump?
Hello, Buddy!
th-cam.com/video/ri1JnCoswOE/w-d-xo.html
Please, Check this URL.
You can watching the video that making a vaccum pump.
I hope you helpful.
What clear coat would you use that will not cause yellowing from heat? My engine cover eventually turned yellowish though not cracking or de-laminating. Thanks.
Hello, Buddy!
I am also looking for clear paint to avoid yellowing.
But it couldn't be found around me.
If you can find it, let me know too.
Thank you for watching.
Ignant Foo it will always yellow, even if u have high heat temp resin, because the constant heat from the engine. If u use cheap resin it will turn yellow faster
So wat would that cost to make as to buying one already made and sure u could sell them if made to order 👍
What is the PVA for?
Do you have links to all the products you used in the video?
I really enjoyed watching that while I gather knowledge for making my own CF race car parts. Do you reccomend anywhere for buying carbon cloth please? And keep posting dude 👍
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
www.easycomposites.co.uk/
The link he sent you (easycomposites.co.uk) has a series of videos. 👍
If you're in the states I buy the majority of my cloth and a few other supplies from fiberglast.com
No affiliation.
Have been prepping track cars and fabbing up parts for a little over 20 years. It's a fun and rewarding process, especially making one-off pieces. If you are serious about producing parts on that level, be sure you have plenty of plugs and moulds of the pieces that often get damaged and take abuse i.e. splitters, undertrays, diffusers, etc. You can make a good living if you're dedicated and turn out quality parts. Good luck!
What is the brand of the clear coat spray that you used at the end, and the rest of the materials that you are using when can they be bought, do you get your materials from a website?
Hello, Buddy!
The clear spray I used is a top coat clear spray for automobiles.
It is a urethane material.
You can get it easily.
By the way, where is the new engine cover with a different approach to work ? I just have an order for a Mercedes brewing, also a lid, so I would like to see another option! I personally see that it is necessary to remove the matrix from the original, moreover , from both sides , since there are also fasteners there , and then according to the technical process ! Thanks !
영상에 나오는 release wax 는 어떤왁스 인가요? 일반 자동차왁스 하고는 다른거죠?
안녕하세요.
일반 자동차 왁스와 성분은 비슷하지만 다른 왁스입니다.
말 그대로 몰드에서 파츠를 디몰드하는데 도움을 주는 왁스입니다.
Where did you get the vinyl from? I need to get one with the right size
Hello, Buddy!
I just bought it in an online shop.
It doesn't matter the size.
I cut and used it.
I hope you helpful.
@@ECOLAPStudio do you happen to know the online shop?
근데 저렇게사용해도 내구성에 전혀 문제가 없나요??
Where you buy those manual hand vaccum?
I made and used a small vacuum chamber.
youtube/ri1JnCoswOE?t=234
You'll watch it on this link.
The vacuum pump is for closures Vacuum
I prefer things that are easy to get without spending a lot of money. ^^
I hope it helped you.
Woooow how many coats of clear coat did you use and did u polish it after
Hello, Buddy!
I probably painted clear coats three or four times.
Polishing is an option.
If you can paint in very clean place with no dust, you probably don't need to polish.
However, be very careful when painting clear coats.
말이 필요 없네요 존경 합니다 폭스바겐 파츠도 부탁합니다
im gonna try this lol.
Hello, Buddy!
If you have any questions, please comment.
I'll tell you what I know.
Thank you for watching.
Good channel Bro... wait for another good video :)
Greet from Indonesia!
Thank you Bro!!
I'm planning another video.
I'll make a good video!!^^
where can i buy those
What grit sand paper are you using to remove the paint? A detailed description would be nice when you do these videoed so people can follow it step by step
Hello, Buddy!
I had no paint remover so I removed the paint with sandpaper.
It was very difficult to remove the paint with sandpaper.
The sandpaper I used to remove the paint is P220 ~ P1000.
Thank you for watching.
awaiting for V2 made of prepreg
If you're looking for a cheap gelcoat bondo, polyester resin wax Adative and tlac or cornstarch babypower
Merci pour tes vidéos c'est vraiment top. Je suis en cours de toutes les regarder.
Pourrais tu ajouter dans descriptif des liens de l'endroit où tu achète t'es différent composant ? J'aimerais aussi que tu explique comment cela ce passe pour ton système sous vide.
Pour info, plutôt qu'utiliser ta pompe à main, tu peu inverser les polarité d'une pompe d'aquarium.
Merci beaucoup 👍
Hello, Buddy!
I bought materials from a Korean online shop.
However, Korean online shops do not ship overseas.
So I'm going to show you an online shop in the UK.
Maybe you can find what you want.
www.easycomposites.co.uk/
The vacuum is..
Simply put, carbon fiber is attached to the mold and air is removed using a vacuum pump.
Carbon fiber is cured in the shape of a mold by an epoxy resin.
I hope you helpful.
@@ECOLAPStudio thank
La certeggiata ipersonica è fantastica 😂
Tu fais comment pour le fixé sur ton haut moteur ?
Sans les pates de fixation il risque jamais de tenir ...
Hello, Buddy!
I haven't actually used this.
Please watch the end of the video.
It wasn't the good quality I wanted.
So I planned to make a new one, but I was busy recently and couldn't make it.
I will make it good quality again when I get a chance.
너무 대단하십니다.. 혹시 진공성형 관련 물품은 어디에서 구매하시는지 좀 여쭤봐도 될까요? 저도 연습해서 좀 만들고 싶습니다.
안녕하세요!
저도 아직은 혼자 배우고 공부하고 있는 단계라 완벽하지는 않지만 좋게 봐주셔서 감사합니다.
저는 보통 재료들을 화이버맨이라고 하는 온라인 쇼핑몰에서 구매하고 있습니다.
도움이 되시길 바랍니다.
감사합니다. ^^
www.fiberman.co.kr
ECO-LAP Studio 너무 멋지고 좋은 마인드이십니다.! 응원할게요!!!
Ok so i have a important question. I am going to be doing this engine cover soon. SO instead of using the epoxy black gel coat, which makes the carbon stick, Can I use a spray adhesive instead?? I have seen people do it this way...
Hello, Buddy!
You have two options.
One is to mold the engine cover by making a mold.
Spray adhesive cannot be used when making molds.
You must use a gel coat.
Another thing is skinning.
You can also use spray adhesive when skinning.
However, I think it is better to use gel coat than spray adhesive.
I hope you helpful.
Thank you for watching.
@@ECOLAPStudio I will be skinning some other parts, so will use spray adhesive
Yamaha Rapt or why do u want to use spray adhesive? As soon as u put resin to the adhesive it will move and lift, it does no good for holding carbon down for an overlay project
@@mlinecomposites1 Ok noted, New to this carbon laying etc so just experimenting. Have got the basecoat epoxy now and works perfect
Yamaha Rapt or listen If u want the fiber to stick without a spray adhesive use the resin itself, pigment it black or use black gelcoat the wait until it gets to B stage, another-words until it gets really tacky. Once tacky carefully place the carbon on top gently pressing it into the resin. Once you have it where u want wait until the next day to start coating it. This is all if u want to do an overlay👍🏾
should have used acetone on the paint to see if it would come off , I have made that mistake when making the mould, if the paint didn't come off you didn't need to sand the paint
Most expensive engine cover.....ever! Yes please!!
How much would u charge for that??
hi, why you use the Pva after relase wax
Hello, Buddy!
I used multiple layers of wax and PVA for easy demolding.
However, PVA does not have a clean surface.
It is recommended to use only release wax.
4:50 where can I find this yellow “elastibag”?
RTM Vacuum Bagging Film www.ebay.com/i/223440964602?chn=ps&norover=1&mkevt=1&mkrid=711-117182-37290-0&mkcid=2&itemid=223440964602&targetid=935694487906&device=t&mktype=&googleloc=9031738&poi=&campaignid=10877432047&mkgroupid=112821775411&rlsatarget=pla-935694487906&abcId=9300402&merchantid=115039991&gclid=CjwKCAjw2dD7BRASEiwAWCtCb--K5gh6V5O_TkyPd7ZFsF455Zgi8PNXJNBCpt6rrPXQYysuR64BshoCHcMQAvD_BwE
I am finding it difficult to source the products you use Can you put a link to the products please
Sir....
How much in ratio Epoxy and Hardner....50%-50%..
..or....75%-25%...??
Bonjour j aimerais faire réparer ma boîte a air carbone apr .
Est ce possible que vous la fassiez ?
Cordialement
When I do my carbon bits, my OCD climbs Mount Everest so even the smallest imperfection, or even a tiny void, I flip
Haha. i thought it was only me.
E for effort, bro ! Make another one with proper stand-off's for the attachment points.
I'm thinking 2 molds will be needed, one for each of the front & back sides. Then epoxy them together !
How can i buy one from you
FYI a good chemical release agent and you would not have had to remove the paint from the cover. then you could have sold it. just use it as a mold.
Use more layers of both carbon fiber and resin/hardener for strength... assuming that was what was wrong.
La ultima parte la mejor .... jajajjaja
Hey Nice dude! Why you do use in the first step 2:26 gelcoat and not normaly epxoy? Thanks!
Hello, Buddy!
Gelcoat is very viscous and strong.
Epoxy resin has a low viscosity, so it cannot flow down and cannot be evenly applied to parts.
Okay. Thanks for your answer!
d0ve posso trovare le buste per il sottovuoto con la pompetta?
Hello, Buddy!
I did not use a special vacuum bag.
I used a vacuum bag and pump for clothing.
I think you can easily find this ^^
Thank you for watching.
I thought sure the screaming gerbil thing was comin at the end...lmao...
In your next project use fiberglass is cheaper to make molds. Take into account a good thickness for said mold.
Hello, Buddy!
Thanks for the advice.
I planned to make another fiberglass mold.
However, there are many other tasks, so the new engine cover work has been delayed.
If you wait, I'll make a good engine cover(Ver. 2).
Thank you for watching.
Where is the sequel?! 😤
How long till part 2? It's been a year lol.