Dude I have been following you for a while on Tik Tok and you are the absolute man when it comes to video. Your energy, knowledge and talent are second to none!
Dang man, this video is still totally applicable! Great insight and discussion! But for real, this guns are bigger than that camera setup. lol keep it real! Thanks for the video!
I know this is a hot topic but I would argue 99% of lenses are 8k ready. I could use my 50 dollar nikkor 50mm 1.8 and it would render the image wonderfully. What's important to keep in mind isn't just sharpness. It's tonal contrast, image fidelity, micro contrast,color saturation and depth rendition.
I've been looking at something like this for my crane 3s. Mainly because I want an arri trinity like system! Thanks for this review, can't trust the ones on B&H since the same reviews carry over to the similar products.
I have the pro and absolutely LOVE how it pairs with the Ursa. I’ll do a full review of this rig that’s not live. There’s a lot more I’m learning about it haha
@@JustinPorterMedia glad to hear you got a good unit. Moving away from mft. Once I saw internal nds and npf power with the grip even the evf looks nice. 6 npfs... all day baby! Keep going bro 😎
@@husariaproductions4240 haha “ALL DAY”! So I took it on a wedding last week and went through about 16 batteries. I intentionally treated it as if it was my only camera and it drains batteries but I was swapping them out like mags in call of duty lol.
Thanks for this! I would love to see footage of you using it and the result! There's little to no content out there on youtube about this that's not sponsored.
So I have a question. I just got a flycam vista II, and a red king stabilizer. I've used it for 2 weddings so far, and each time, my shoulders would hurt after a while. any suggestions for setting it up better for more comfort during long periods of shooting?
@@JustinPorterMedia sorry I meant the docking bracket where you rest your steadicam on the C Stand.. I don't know if Docking bracket is what it is called...
If I already have the flycam flowline "easyrig" setup for my gimbal would this still be worth getting? I'm using a canon c200 so it'll be autofocus most of the time so won't have to pull focus. I like the easyrig with gimbal and ring setup but don't love the limited range of motion compared to a steadycam. Granted I've never used a steadicam b4 and known there will likely be a steep learning curve, but I also feel it'd be good for me as a camera operator to learn steadycam operations. But I'm fighting between spending 1k on this or 1.5k on an ifootage s1a3 motion control slider bundle. I'm not sure what the better investment is. Also worried that since this is a budget steadicam system that I'll likely be disappointed with how it operates compared to similar systems (that obviously cost more) anyway; love your content! Found you on TikTok and now here! Keep it up!
Super helpful! Thank you a lot! Question: Flycam has two options Redking and Zest, I plan to use this with BMPCC 6K + Sigma 18-35 lens. From my point of view, the biggest difference is looking at a monitor on camera or at bottom of a steadicam. What you may suggest from your practice? Is the monitor at the bottom is necessary or not? Is it more convenient to look down when you move or not? (in any case, I plan to buy Vista II arm + vest, but now I choosing between Redking and Zest). Good luck to you and your channel!
Thanks so much for watching. So if you plan to use the pocket I would say the redking would do you good. One thing to keep in mind though is you’ll have the stabilizer going across your body so looking at the monitor on camera may not be the best. The redking has the micro adjustable top which is real nice. I wish the Zest had that but it only has the left and right micro adjustments.
I would highly recommend you look down on the bottom monitor when operating. Very important that you know where you’re walking and what’s around you on the ground
Hello and thanks for this video. I have a question for you a bit unrelated to the topic, but very important: how do you find the CAME-TV wireless focus system? My experience with it was horrible, it was never smooth, never a chance to get a normal smooth rotation, on photo lenses or on cinema lenses. I had no way of making it work properly, even trying all possible torque settings. And the lemo cable locking system even broke after a few times I used it. Came-TV support is ridiculous, I wrote them even sending a video of my problem, they answered my message was forwarded to the dedicated department and nobody ever wrote me back. So I ended up using Tilta N, and never touching Came-TV products ever again. For me, too cheap, fragile and frustrating. But, I would be interested to know if you manage to get smooth rotations, even for very short movements. Thanks in advance.
Wow that’s so crazy. I actually had the same issue but it wasn’t all the time. It would happen on random occasions and I finally said screw it. Now I use the tilta nano motor and nucleus m handle. Much better solution.
@@JustinPorterMedia Oh, that's very interesting to know! So I wasn't the only one with this problem. I liked some things of it, especially the 4 focus points, but at the end the system is too unreliable. Tilta is another life, I agree 100%. Thanks a lot for the info!
Yo! I love it honestly. I changed the springs to support the heavier camera payloads but I haven’t had to replace them from wear and tear. The v Mount plate is somewhat janky to me but it works. That’s the only thing I’ve noticed after using it that I’m not happy with.
@@JustinPorterMedia thanks bro ✊🏼. I just ordered mine. I just wish they would label their springs to say more or less which weigh capacity each set can hold. Specially the blue ones.
Very good review. I bought the same flrycam zest and have the same camera but my only problem is it took me a lot of times to put the camera on the plate. I see you used manfrotto 504 quick release plate but how do you fixed it on the flycam plate? Thank you!
Oh yes, I use the manfrotto 504 for all my gear. I bought a 504 quick release from Niceryrig off Amazon. www.amazon.com/dp/B07F7P1G1R/ref=cm_sw_r_cp_api_glt_fabc_X5FNDDXMK3KNNKRZ2DGY?_encoding=UTF8&psc=1 Then I mount the base to the top of the zest.
@@JustinPorterMedia I appreciate everything. I just got the plate today and the external monitor but I just figure out that the SDI connector from the flycam zest is different. Did you use another connector?
im shooting with the Nikon D3200 and although im a beginner, ive added some sweet pieces to the point that my camera is heavier. so im about to buy this rig becasue i experienced the SHAKY ARM and i cant go out like that. lol... anyhow, thank you for sharing
Heck yea. That was my first camera. Loved it and rocked with it for a long time. This arm would be nice however, I don’t think it’s the best option. Unless you have assistants on set, it’s really hard to control focus as a one person crew. I’d do a gimbal like the rs3 and follow focus wheel. Just ideas. 🙌🏾
@@JustinPorterMedia Thats a Good point, I just added a Focus Puller and you are right. damn. thank you for that wake up call. i was looking for somthing to take the tension off my arms because i shoot out door Lowrider and Harley bike set events and im runnin and gunnin random. so i need to always have it on me. do you recommend something to help take the load off? even with the rs3 is there a carrier or something to help from carrying it?
Really Thinking bout getting this. Really good video Fam. I have a Crane 3 pro and I always wanted a steady with a vest. But like you said they are way expensive. Just got an email from Proaim telling me about this product. I've purchased from them before. Like their products though I bought a Jib from them and was a bit disappointed in the build with that product. I actually don't even use it anymore after my Ursa almost crashed to the ground during a shoot. But I'm hearing good things bout this one.
Evening quick question. I have a Tilta Amor Man vest (are you familiar with that?) Which is a Dual mechanical Arm vest type gravity system. If you don't own one or have used one in the past I'm sure you may not be able to give me an accurate assumption. But I have to ask in your opinion is do you think it be possible to use that vest instead of the vest you are using?
Alot of steadicam operators have a spotter walking behind grabbing the back of the vest to make sure the operator doesn't run into anything or trip over anything.
The padding isnt the reason your shoulder hurts, I have the same problem. You're vest isnt fitting you properly, I have a vest from steadyproline and the padding is really nice except it slips as its too big. Your vest is doing exactly what mine is doing. The vest shouldnt slip after 1 hr of use. And some tips, dont have the rig too far out to the side, your pivot point wont be even on the vest. You need to be at a 45 degree angle facing your camera to keep your pivot point in centre line of your body. I only found this out not long ago. The moment you put your vest on and holding your camera, the vest is already slipping. I counted around 20 seconds before you felt the weight uneven. The arm isnt springing your camera to the side, its your vest sitting wrong thats doing that. Id ask the manufacter for a proper size fit. Balance wise, try to move the gimbal up or down the sled. Its much easier and you'll get a much more fine adjustment. Its very rare to move the bottom half unless you have a super heavy camera. Hope this helps.
No problem. Could I link you a channel that gives really good advice on vest fitting? Chris from tiffen steadicam does a brilliant explanation on vest size and fitting.
the only thing I hate the most is there is no SDI hook ups on the slead like hdmi. so for more profressional cameras you have none 🤦🏾♂ unless anybody knows any work around for this
@@CleebridgeFilms Looking at this for an ursa 12K. the only HDMI seems like a deal breaker. Is there another Stabilizer that might go on the arm that has SDI support? I only ask because I'm just digging into this. courious what you ended up doing.
Yo bro, what city are you in now? If we’re close, I rather invest you as my videographer versus some random. 💯 hopefully we’re not too far from each other. I’m in Philly. This Otis
@@gges1605 no no, I get it. I actually do agree with you on that but I was being lazy haha. I did this live for the first time in our living room lol. Next time will be better :)
@@JustinPorterMedia its a good video content wise thanks for posting it im looking to pick up a vest as ive a bad back so looking around YT for info on the different ones available
Don't come at me about the ceiling lol. We are remodeling and getting rid of the popcorn haha
Dude I have been following you for a while on Tik Tok and you are the absolute man when it comes to video. Your energy, knowledge and talent are second to none!
Thank you so much! That seriously means the world. I love the support man 🙌🏾🙌🏾🙌🏾
Dang man, this video is still totally applicable! Great insight and discussion! But for real, this guns are bigger than that camera setup. lol keep it real! Thanks for the video!
You are so enjoyable to watch. Thank you :)
Great video. Have you tested Laowa 2.9 Cine lens extra wide coverage?
Love it. It looks like the gun mount from Aliens.
Because they actually used a steadicam arm & vest for that in the movie lol
Heyy. Thanks! I was searching for this review.
Can you link a project that you have used this setup on ?
I know this is a hot topic but I would argue 99% of lenses are 8k ready. I could use my 50 dollar nikkor 50mm 1.8 and it would render the image wonderfully. What's important to keep in mind isn't just sharpness. It's tonal contrast, image fidelity, micro contrast,color saturation and depth rendition.
So true bro. I always get caught up in the “sharpness” lol
Nice set-up
Thanks a lot for this. Really appreciate it!
I've been looking at something like this for my crane 3s. Mainly because I want an arri trinity like system! Thanks for this review, can't trust the ones on B&H since the same reviews carry over to the similar products.
I will hopefully do a full in depth better review soon. Glad this did help you though. 🙌🙌🙌
So glad i convinced you to go with BM
This was great!! Just sold my siruis and gearing up to go bmpcc6k pro. Just waiting for third fourth batches.
I have the pro and absolutely LOVE how it pairs with the Ursa. I’ll do a full review of this rig that’s not live. There’s a lot more I’m learning about it haha
@@JustinPorterMedia glad to hear you got a good unit. Moving away from mft. Once I saw internal nds and npf power with the grip even the evf looks nice. 6 npfs... all day baby! Keep going bro 😎
@@husariaproductions4240 haha “ALL DAY”! So I took it on a wedding last week and went through about 16 batteries. I intentionally treated it as if it was my only camera and it drains batteries but I was swapping them out like mags in call of duty lol.
@@JustinPorterMedia 😯 😂 I mean not surprised. A lot of 60fps? That might drain more. But dang.
Do you still use steadicam like systems?
Thanks for this! I would love to see footage of you using it and the result! There's little to no content out there on youtube about this that's not sponsored.
So I have a question. I just got a flycam vista II, and a red king stabilizer. I've used it for 2 weddings so far, and each time, my shoulders would hurt after a while. any suggestions for setting it up better for more comfort during long periods of shooting?
Thanks for the Review!
Thanks broski everyone is going the steadycam route!
you need to adjust the arm so it stays in front of you
Great vid. What's your thoughts on it now that you've had it for a while?
Hello Justin, could you tell me what you are hanging the flycam on. Is that just a stand with a baby pi or a special stand one would need.? Thanks
Hey. So it’s the proaim flycam mount. I got it off proaims website but it attaches to a light stand so you can set it up easier
Can you help with the link of where you got your docking bracket from... It doesn't come with the steadicam... Nice video
www.amazon.com/dp/B07F7P1G1R/ref=cm_sw_r_cp_awdb_imm_KEV6VQ87QDCSWRCNTPVQ?_encoding=UTF8&psc=1
@@JustinPorterMedia thanks
@@JustinPorterMedia sorry I meant the docking bracket where you rest your steadicam on the C Stand.. I don't know if Docking bracket is what it is called...
@@fajumosamuel2616 ooooo yea my bad. It’s this here.
www.proaim.com/products/proaim-docking-balance-bracket-for-camera-stabilizer
Awesome video bro...SALUTE!!!
If I already have the flycam flowline "easyrig" setup for my gimbal would this still be worth getting? I'm using a canon c200 so it'll be autofocus most of the time so won't have to pull focus. I like the easyrig with gimbal and ring setup but don't love the limited range of motion compared to a steadycam. Granted I've never used a steadicam b4 and known there will likely be a steep learning curve, but I also feel it'd be good for me as a camera operator to learn steadycam operations. But I'm fighting between spending 1k on this or 1.5k on an ifootage s1a3 motion control slider bundle. I'm not sure what the better investment is. Also worried that since this is a budget steadicam system that I'll likely be disappointed with how it operates compared to similar systems (that obviously cost more) anyway; love your content! Found you on TikTok and now here! Keep it up!
That depends honestly. This is definitely worth it. The easyrig is more run and gun whereas this will require some training.
@@JustinPorterMedia thanks man!
Super helpful! Thank you a lot! Question: Flycam has two options Redking and Zest, I plan to use this with BMPCC 6K + Sigma 18-35 lens. From my point of view, the biggest difference is looking at a monitor on camera or at bottom of a steadicam. What you may suggest from your practice? Is the monitor at the bottom is necessary or not? Is it more convenient to look down when you move or not? (in any case, I plan to buy Vista II arm + vest, but now I choosing between Redking and Zest). Good luck to you and your channel!
Thanks so much for watching. So if you plan to use the pocket I would say the redking would do you good. One thing to keep in mind though is you’ll have the stabilizer going across your body so looking at the monitor on camera may not be the best.
The redking has the micro adjustable top which is real nice. I wish the Zest had that but it only has the left and right micro adjustments.
I would highly recommend you look down on the bottom monitor when operating. Very important that you know where you’re walking and what’s around you on the ground
Hello and thanks for this video. I have a question for you a bit unrelated to the topic, but very important: how do you find the CAME-TV wireless focus system? My experience with it was horrible, it was never smooth, never a chance to get a normal smooth rotation, on photo lenses or on cinema lenses. I had no way of making it work properly, even trying all possible torque settings. And the lemo cable locking system even broke after a few times I used it. Came-TV support is ridiculous, I wrote them even sending a video of my problem, they answered my message was forwarded to the dedicated department and nobody ever wrote me back. So I ended up using Tilta N, and never touching Came-TV products ever again. For me, too cheap, fragile and frustrating. But, I would be interested to know if you manage to get smooth rotations, even for very short movements. Thanks in advance.
Wow that’s so crazy. I actually had the same issue but it wasn’t all the time. It would happen on random occasions and I finally said screw it. Now I use the tilta nano motor and nucleus m handle. Much better solution.
@@JustinPorterMedia Oh, that's very interesting to know! So I wasn't the only one with this problem. I liked some things of it, especially the 4 focus points, but at the end the system is too unreliable. Tilta is another life, I agree 100%.
Thanks a lot for the info!
Hey, how is it working so far? did you have to change the springs at any time? I would love to know more.
Yo! I love it honestly. I changed the springs to support the heavier camera payloads but I haven’t had to replace them from wear and tear. The v Mount plate is somewhat janky to me but it works. That’s the only thing I’ve noticed after using it that I’m not happy with.
@@JustinPorterMedia thanks bro ✊🏼. I just ordered mine. I just wish they would label their springs to say more or less which weigh capacity each set can hold.
Specially the blue ones.
Why is there such a price difference between this steadycam kit (flycam zest + vista II) and a "real" steadycam like a Tiffen?
When did you buy the Steadicam?? Is it alible yet?
I haven’t had it too long but I love it. It’s a learning curve but worth it in my book.
Are you using sdi or hdmi with the Zest? Is the cabling on the sled well done? Or is it kinda clunky?
Cabling was really clean. It was pretty long but it works. Nothing a few zip ties can’t handle
Very good review. I bought the same flrycam zest and have the same camera but my only problem is it took me a lot of times to put the camera on the plate. I see you used manfrotto 504 quick release plate but how do you fixed it on the flycam plate? Thank you!
Oh yes, I use the manfrotto 504 for all my gear. I bought a 504 quick release from Niceryrig off Amazon. www.amazon.com/dp/B07F7P1G1R/ref=cm_sw_r_cp_api_glt_fabc_X5FNDDXMK3KNNKRZ2DGY?_encoding=UTF8&psc=1
Then I mount the base to the top of the zest.
Would you mind please to show me how you fixed the plate on the top?
@@JustinPorterMedia Thank you so much! You are the best. I just ordered.
@@JustinPorterMedia I appreciate everything. I just got the plate today and the external monitor but I just figure out that the SDI connector from the flycam zest is different. Did you use another connector?
@@espoirelikia8956 the zest should have come with the rca-Sdi adapter. Did you not receive that?
im shooting with the Nikon D3200 and although im a beginner, ive added some sweet pieces to the point that my camera is heavier. so im about to buy this rig becasue i experienced the SHAKY ARM and i cant go out like that. lol... anyhow, thank you for sharing
Heck yea. That was my first camera. Loved it and rocked with it for a long time.
This arm would be nice however, I don’t think it’s the best option. Unless you have assistants on set, it’s really hard to control focus as a one person crew. I’d do a gimbal like the rs3 and follow focus wheel. Just ideas. 🙌🏾
@@JustinPorterMedia Thats a Good point, I just added a Focus Puller and you are right. damn. thank you for that wake up call. i was looking for somthing to take the tension off my arms because i shoot out door Lowrider and Harley bike set events and im runnin and gunnin random. so i need to always have it on me. do you recommend something to help take the load off? even with the rs3 is there a carrier or something to help from carrying it?
@@hogg1media627 check out my gimbal video I just oploaded. I use the easyrig and love it with the gimbal
@@JustinPorterMedia cool, I appreciate you bro
Really Thinking bout getting this. Really good video Fam. I have a Crane 3 pro and I always wanted a steady with a vest. But like you said they are way expensive. Just got an email from Proaim telling me about this product. I've purchased from them before. Like their products though I bought a Jib from them and was a bit disappointed in the build with that product. I actually don't even use it anymore after my Ursa almost crashed to the ground during a shoot. But I'm hearing good things bout this one.
Oh man that’s scary. Yes I definitely recommend tbis. Build quality is really good and I trust it with my Ursa lol.
That balancing bracket you just attach that to a light stand I'm presuming?
@@jcinewilliams8819 yep. C stand works better though
Evening quick question. I have a Tilta Amor Man vest (are you familiar with that?) Which is a Dual mechanical Arm vest type gravity system. If you don't own one or have used one in the past I'm sure you may not be able to give me an accurate assumption. But I have to ask in your opinion is do you think it be possible to use that vest instead of the vest you are using?
Alot of steadicam operators have a spotter walking behind grabbing the back of the vest to make sure the operator doesn't run into anything or trip over anything.
Can we use this arm for flycam redking?
You should be able to. It has the common attachment for flycam sleds
@@JustinPorterMedia thankyou!
The padding isnt the reason your shoulder hurts, I have the same problem. You're vest isnt fitting you properly, I have a vest from steadyproline and the padding is really nice except it slips as its too big. Your vest is doing exactly what mine is doing. The vest shouldnt slip after 1 hr of use. And some tips, dont have the rig too far out to the side, your pivot point wont be even on the vest. You need to be at a 45 degree angle facing your camera to keep your pivot point in centre line of your body. I only found this out not long ago. The moment you put your vest on and holding your camera, the vest is already slipping. I counted around 20 seconds before you felt the weight uneven. The arm isnt springing your camera to the side, its your vest sitting wrong thats doing that. Id ask the manufacter for a proper size fit. Balance wise, try to move the gimbal up or down the sled. Its much easier and you'll get a much more fine adjustment. Its very rare to move the bottom half unless you have a super heavy camera. Hope this helps.
Now I need to do some digging and find a resolution. Thank you so much for the insight my friend.
No problem. Could I link you a channel that gives really good advice on vest fitting? Chris from tiffen steadicam does a brilliant explanation on vest size and fitting.
@@CapturingCornwall yes please do so
@@JustinPorterMedia th-cam.com/channels/lpPyDqk3g4CvK_dVGzfuCg.html
How can i keep in contact?
I think the Exo vest would be better for you. Im also looking into buying one myself.
the only thing I hate the most is there is no SDI hook ups on the slead like hdmi. so for more profressional cameras you have none 🤦🏾♂ unless anybody knows any work around for this
If you find out, please let me know.
I'm planning on buying this for the Ursa mini Pro 4.6 G2 which is only SDI
@@CleebridgeFilms Looking at this for an ursa 12K. the only HDMI seems like a deal breaker. Is there another Stabilizer that might go on the arm that has SDI support? I only ask because I'm just digging into this. courious what you ended up doing.
Yo bro, what city are you in now? If we’re close, I rather invest you as my videographer versus some random. 💯 hopefully we’re not too far from each other. I’m in Philly. This Otis
Yo! What up bro. I'm in Texas now otherwise I would be down for sure!
Have you used it for a wedding?
No I haven’t. I couldn’t get a god way to pull focus and stay steady. I’ll do a video on the new setup
you needed a light on its way to dark
Dang. The two that were on just wasn’t enough 😂
sry bud i meant no offence but the scene is to dark you can't see the highlights
@@gges1605 no no, I get it. I actually do agree with you on that but I was being lazy haha. I did this live for the first time in our living room lol. Next time will be better :)
@@JustinPorterMedia its a good video content wise thanks for posting it im looking to pick up a vest as ive a bad back so looking around YT for info on the different ones available
What are you talking about? 🤣🤣 this is a totally proper exposed image. Did you want it blown out? 🤣