Ten seconds in, a woman using power tools about plants, combining two of my favorite things? Yep 👌 subscribed. This gives me so much inspiration for my plants! I’m also a woman who uses power tools and has a big indoor plant collection. I actually found this looking for ideas to use my new Diamond drill bits on! So cool.
Thanks Peggy! I’ve always drilled holes in my pots but never have drilled glass. I have a couple of orchids I’m going to do this for. Have had lecca for months but have yet to use it. Now I have good reason to.
Thanks so much for this video! With your help I just cut 4 perfect holes in my two orchid glasses which I found at Dollar Tree (thanks for that tip as well ) 😀
😂😆 Not the Chupa Cabra! I can't speak to anyone else's experience, but I have never experienced overheating glass or blindness. While basic precautions should be taken, I've been putting holes in glass this way for years. I guess it's true that ignorance can be bliss. I will continue in my bliss. 😊 Thanks for watching!
This is one thing I would really like to see sold on Etsy! Glass with holes in it already cut. I bought the drill bit but I still haven't worked up the courage to try this. Currently I'm just using plastic with holes made with my woodburning tool. I'm chicken!
Maybe you can start off on an old drinking glass or something like that. Once you see how easy it is, you'll be ready to put holes in everything! LOL A thrift store would be a good place to buy some practice glass. You can do it!😀
@@anjelc9kmourtney151 only one way to get the answer , research is the best ally for some, knowledge of glass & areas to avoid would be good to see what others are doing / saying but older glass is a much safer way to go !!! G L
I drill holes in ceramic, clay, and glass. I make a template the size of the bit. Those bits do not have anything in the center like other hole cutters. The template will hold the bit in place, and prevent it from sliding, and bouncing around. Hope this helps.
One I started drilling holes in ceramics and terracotta, I put holes in everything! It's a great way to make planters out of everything. Thanks for watching!
I enjoyed watching this video Peggy I’ve drilled holes in my ceramic pots but I’ve never tried glass you definitely have given me the courage to try it. Thanks for sharing 💚🌿
You are so welcome. If you can drill holes in ceramic pots, you can do it in glass. It''s the same. Can't wait to see what you do! Thanks for watching.🌿💚
Hi Peggy, I just discovered your channel. I m very happy I did. I like your calmness when you speak and your teaching ability. I noticed a vase that had two holes, but you only drilled one. Is there a rule of thumb to how many holes, or does it depend on the plant or vase? I would appreciate your help as I have subscribed and so look for forward to catching up on all your videos! Thank you again for your hard work on sharing knowledge of care for houseplants! 🥰
Hello and welcome to our plant family! How many holes I drill usually depend on the size of the drill bit I'm using. If the holes are really small, I drill two. If they are larger, I drill one. One thing to keep in mind is the size of the Leca you're using. If you're using smaller leca pellets, be sure not to make your holes too big. Yes, I learned that lesson the hard way! 😊
Great job. I've always been affraid of cutting holes in my glass but now I think I may try.,I was so nervous with you holding that vase in your hand like that😱😱 I was praying 🙏it didn't shatter and cut you up😱😳✌💖
It's actually quite easy to drill the holes in glass. In fact, I've never had one break yet. I should probably be wearing gloves, but it makes it harder for me to hold onto the vase. Thanks for your concern, my friend. Thanks for watching.
Hi Peggy, Lolita is here again. I need also the drill machine but I dont know what size ,should I buy, and the equipment you use in drilling. I have the courage but only what to buy, pls help me... Thank you ! Im always looking for your new video something would I learn from you again😀❤️
Yes, absolutely! I"ve used diamond bits and the same technique on very thick ceramics. Slow and steady. It takes longer but the results for me, have always been good. Thanks for watching.
Thankfully, that hasn't happened yet, but I appreciate your concern. Thanks for watching!
4 ปีที่แล้ว +1
Peggy, It's funny that I never drilled holes in my glass when I use the leca. Ernest has all the tools you noted except the drill bits. He is not sure if he has the one for tile or glass b/c he says they look similar. Either way, I am going to leave this in his hands b/c I am clumsy and don't do things right lol. Appreciate this video b/c I was thinking I need to put my aglaonema in water b/c it is going down hill real fast for some reason.
LOL, not scary at all. I think you would be surprised at how easy it is. I don't know where you can get glass with a drainage hole, but you can always use self watering pots.
To cut glass or ceramics, a diamond drill bit is recommended. As far as Bonsai growing in Leca, if the plant is happy in Leca, then it shouldn't matter how it is trimmed. I would say it depends on the plant you are using for the Bonsai.
Yes, they will. I actually have my Teneke in Leca now and it is doing well. It's been in Leca for about 2 months and has had no problems. I've also seen other people growing them in Leca, as well.
I had several growing on the trees in my house in South Florida and they did well. I've only mounted one or two at my new house and they too are growing without issues.
Ten seconds in, a woman using power tools about plants, combining two of my favorite things? Yep 👌 subscribed. This gives me so much inspiration for my plants! I’m also a woman who uses power tools and has a big indoor plant collection. I actually found this looking for ideas to use my new Diamond drill bits on! So cool.
Thanks for the sub and for watching! Happy drilling and growing.🌿💚🙌
Thanks-- I like your factual, organized and no frills presentation.
Glad it was helpful. Thanks for watching!
Thanks Peggy! I’ve always drilled holes in my pots but never have drilled glass. I have a couple of orchids I’m going to do this for. Have had lecca for months but have yet to use it. Now I have good reason to.
Glad it was helpful! I think you will be pleased with the results. Thanks for watching!🌿💚
Thanks so much for this video! With your help I just cut 4 perfect holes in my two orchid glasses which I found at Dollar Tree (thanks for that tip as well ) 😀
Glad I could help. I get my cylinders from Dollar Tree also. Isn't it amazing how easy it is to cut the holes? Glad it worked out for you.,
I love that you do it yourself! I Will deffinatly try too. Thank you for the video!
You are so welcome!
This is super helpful! Can be intimidating to try to drill things like this without advice
Glad it was helpful!
Great video!
Heading over to Lowes for the drill bit and Dollar Tree for the vessels.
Have fun!
Thank you for this video I'm going to try leca with my orchids
It's the only way I'm able to keep them alive and get them to re-bloom. Best of luck.
Soooooo many FEELINGS. I've been warned about overheat glass destruction like it was the Chupa Cabra.
Thank you!
😂😆 Not the Chupa Cabra! I can't speak to anyone else's experience, but I have never experienced overheating glass or blindness. While basic precautions should be taken, I've been putting holes in glass this way for years. I guess it's true that ignorance can be bliss. I will continue in my bliss. 😊 Thanks for watching!
Just the information I was looking for, very helpful thanks. Also love all the sunshine coming through your windows.
Glad the video was helpful and I'm happy to share some sunshine with you! 😊🌿💚🌞
Great informative video, Peggy!! Very excited to try this later. Much love from Oregon! ❣️🌿
Thank you. I'm glad you're excited to give it a try. Thanks for watching!
Thank you Ms.Peggy very helpful!
Glad you found it helpful. Hanks for watching!
This is one thing I would really like to see sold on Etsy! Glass with holes in it already cut. I bought the drill bit but I still haven't worked up the courage to try this. Currently I'm just using plastic with holes made with my woodburning tool. I'm chicken!
Maybe you can start off on an old drinking glass or something like that. Once you see how easy it is, you'll be ready to put holes in everything! LOL A thrift store would be a good place to buy some practice glass. You can do it!😀
@@PeggysPlants i have my succulent plant in a pretty thick average size wine glass 🍷 would it be okay to cut a small hole in that?
@@PeggysPlants thank you btw so much for this!!!! 🙏🏿
@@anjelc9kmourtney151 only one way to get the answer , research is the best ally for some, knowledge of glass & areas to avoid would be good to see what others are doing / saying but older glass is a much safer way to go !!! G L
I drill holes in ceramic, clay, and glass. I make a template the size of the bit. Those bits do not have anything in the center like other hole cutters. The template will hold the bit in place, and prevent it from sliding, and bouncing around. Hope this helps.
Thanks for the helpful tip. I'll have to try that!
This is another great video. I use the same technique for drilling holes in ceramic vessels. Slow and steady wins the race.
One I started drilling holes in ceramics and terracotta, I put holes in everything! It's a great way to make planters out of everything. Thanks for watching!
All around plant lady. Cool and looks easy
Thanks and IS easy! Thanks for watching.🌿💚
Great video. I appreciate the step by step instructions and that you are concise! Thank you so much!
You're welcome. Glad it was helpful. Thanks for watching!
You are great!!! Thanks so much for sharing
You are so welcome! Thanks for watching.🌿💚
Hello Peggy. Yes very interested thanks as always enjoyed and very informative.
Thank you for watching.
Thank you Peggy good to no .
You are so welcome. Thanks for watching.
This is exactly what I've been looking for, thanks!
Glad I could help! Good luck.
Thanks Peggy. I have a (never used) drill and will someday try this. Lol.
You can do it!😊
Brilliant video. Thank you .
Glad it was helpful. Thanks for watching!
I enjoyed watching this video Peggy I’ve drilled holes in my ceramic pots but I’ve never tried glass you definitely have given me the courage to try it. Thanks for sharing 💚🌿
You are so welcome. If you can drill holes in ceramic pots, you can do it in glass. It''s the same. Can't wait to see what you do! Thanks for watching.🌿💚
@@PeggysPlants I just might try it and you know I always enjoy watching your videos🥰💚🌿
If you have any questions, feel free to ask. Likewise, I enjoy your vids too!💚🌿🌻
Very informative
Glad you found my video informative. Thanks for watching!
I love this video! Simple and easy to follow, just what I was looking for
Glad it was helpful!
VERY CREATIVE IDEA!!
Thank you! 😊
Thank you
You're welcome. Thanks for watching!
Thank you so very much for the video 🤗
You are so welcome!
Great tutorial so thank you!
Do you ever need to use emory colth to sand the edges or does the drill bit smooth them enough?
I've never had to use anything to smooth the edges.
Hi Peggy, I just discovered your channel. I m very happy I did. I like your calmness when you speak and your teaching ability. I noticed a vase that had two holes, but you only drilled one. Is there a rule of thumb to how many holes, or does it depend on the plant or vase? I would appreciate your help as I have subscribed and so look for forward to catching up on all your videos! Thank you again for your hard work on sharing knowledge of care for houseplants! 🥰
Hello and welcome to our plant family! How many holes I drill usually depend on the size of the drill bit I'm using. If the holes are really small, I drill two. If they are larger, I drill one. One thing to keep in mind is the size of the Leca you're using. If you're using smaller leca pellets, be sure not to make your holes too big. Yes, I learned that lesson the hard way! 😊
Thank you so much for doing this video. ♥
You are so welcome!
Does the glass have to be a certain thickness? I’m worried about shattering. Thank you
No it does not. However, the thinner the glass, the more delicate and more likely to break.
Great job. I've always been affraid of cutting holes in my glass but now I think I may try.,I was so nervous with you holding that vase in your hand like that😱😱 I was praying 🙏it didn't shatter and cut you up😱😳✌💖
It's actually quite easy to drill the holes in glass. In fact, I've never had one break yet. I should probably be wearing gloves, but it makes it harder for me to hold onto the vase. Thanks for your concern, my friend. Thanks for watching.
@@PeggysPlants ya I dont like wearing gloves either.. I like to feel what I'm doing in the garden or what ever I'm doing😳😳✌💖
It's getting scary, Suzette! Sometimes I think we are just different versions of the same person. 😀😊🤔
Hi Peggy, Lolita is here again. I need also the drill machine but I dont know what size ,should I buy, and the equipment you use in drilling. I have the courage but only what to buy, pls help me... Thank you !
Im always looking for your new video something would I learn from you again😀❤️
Hello Lolita! Any hand held drill should work. Thanks for watching and enjoy your project.
excellent video, thank you Peggy. I wish we were neighbors ;-)
LOL, being neighbors with another plant person could be dangerous! 😄 Thanks for watching.
Thanks for the informative video!
Would this work on thick (~1 inch) ceramics? Maybe if you use a steady stream of water to keep the bit cool.
Yes, absolutely! I"ve used diamond bits and the same technique on very thick ceramics. Slow and steady. It takes longer but the results for me, have always been good. Thanks for watching.
@@PeggysPlants Thanks!
Oh my goodness I was cringing worried you were going to slip
And drill your hand. Great job though. Love the look
Thankfully, that hasn't happened yet, but I appreciate your concern. Thanks for watching!
Peggy, It's funny that I never drilled holes in my glass when I use the leca. Ernest has all the tools you noted except the drill bits. He is not sure if he has the one for tile or glass b/c he says they look similar. Either way, I am going to leave this in his hands b/c I am clumsy and don't do things right lol. Appreciate this video b/c I was thinking I need to put my aglaonema in water b/c it is going down hill real fast for some reason.
I've saved a few plants by putting them in LECA when they start fading. Hope you are able to save your aglaonema!
I’m enjoying the lecca journey! I’m not brave enough 😩
Once you give it a try, you'll be wondering why you waited so long to do it. It really is easy. Everything in its time... Thanks for watching!
Can I drill at the bottom so it drained better ?
The vessel can't hold water if you put a hole in the bottom.
Wow,that looks scary. Is there anywhere I can buy vase with holes already cut out?
LOL, not scary at all. I think you would be surprised at how easy it is. I don't know where you can get glass with a drainage hole, but you can always use self watering pots.
Hi Peggy, So are you just rinsing the glass dust down your drain? or are you doing it over some type paper towel or whatever to catch it?
It comes off in powder form so I rinse it down the drain. It hasn't caused me any problems.
Is that a special drill bit for glass and can Leca be used for Bonsai?
To cut glass or ceramics, a diamond drill bit is recommended. As far as Bonsai growing in Leca, if the plant is happy in Leca, then it shouldn't matter how it is trimmed. I would say it depends on the plant you are using for the Bonsai.
Thanks for doing this video. Question, how may holes do you dril for each vessel? TY!
If I'm using a small drill bit, I drill one hole. If the hole is larger, I only drill one hole.
@@PeggysPlants did you mean 2 holes for the small drill bit?
Hi Peggy, Will a ficus tree grow in Leca?
Yes, they will. I actually have my Teneke in Leca now and it is doing well. It's been in Leca for about 2 months and has had no problems. I've also seen other people growing them in Leca, as well.
@@PeggysPlants Hi Peggy, I referring to the smaller leaf ficus(Exotica, I believe) not the large leaf like Fiddle leaf ficus or Teneke.
Tried this today and shattered the glass :(. The bit was moving around so much initally.
Try holding your bit at more of an angle initially, so that it makes a groove. Then gradually tilt it as the groove grows larger.
@@PeggysPlants Yeh I tried that, i had a nice hole going but at the very end it shattered.
have you had any luck growing orchids on trees?
I had several growing on the trees in my house in South Florida and they did well. I've only mounted one or two at my new house and they too are growing without issues.
You should wear a glove on your left hand!
I know, and goggles too. Maybe next time... Thanks for watching.
Safety glasses people!
I believe I showed and mentioned safety glasses in the video. I was wearing them. Thanks for your concern and for watching.
Please wear a mask! The glass dust is terrible for your lungs :( , thanks for the video!!
You are 100% correct! Thank you for caring and for the reminder. 😌🌿💚