I think you should have given a shout out to Further Fabrication for his design. I am currently building the y1200. I was wondering why you have 4 stepper drivers? One per axis, {X, Y, Z}, I understand. Are you using using two motors for one axis? If so, why?
for X and Y is ok. but for Z i dont recomended 6mm. table is heavy and motir need much more power to move. check aliexpress, you can buy any size of belt
@@Do.ityourself I have found that you have used 2028 corner connector but I am unable find these type of connector in my place so could I use 2020 corner connector instead of this? And I have one more query can I use sliding t nut for all purpose instead of spring t slot nut and rotating t slot nut?
![90W Laser Cutter From Scratch | Y-400 [Part 1]](http://i.ytimg.com/vi/v75h6Dl_n_U/mqdefault.jpg)
Can’t wait for part 2
excellent work
I just designed my own laser cutter and I am shocked to see that we came up with the same design
Nice!!!
how maximum work area i can have using just gt2 to X and Y, like a diode cnc? i don't care to high speed, i just want cut
I think you should have given a shout out to Further Fabrication for his design. I am currently building the y1200. I was wondering why you have 4 stepper drivers? One per axis, {X, Y, Z}, I understand. Are you using using two motors for one axis? If so, why?
I made U-axis. For rotary jig. I dont want switch cables between X and U, thats way i made 4.
@@Do.ityourself That's smart.
Can you share the links for the printed parts?
I cant upload files because i bought this plans. But you can also buy this for 5$ here: www.furtherfabrication.com/resources/y1200-cadmodel
@@Do.ityourself Got that. Thank you!
Can I use 6mm gt2 belt for this because it is only available in my place?
for X and Y is ok. but for Z i dont recomended 6mm. table is heavy and motir need much more power to move. check aliexpress, you can buy any size of belt
@@Do.ityourself
I am only going to make x and y!
What size do you use?
Can we use 10mm?
Further fabrication told 9mm is the max size which will fit!
@@Do.ityourself
I have found that you have used 2028 corner connector but I am unable find these type of connector in my place so could I use 2020 corner connector instead of this?
And I have one more query can I use sliding t nut for all purpose instead of spring t slot nut and rotating t slot nut?
yes, you can use 20x20 corners. I use GT2 9mm for XY ans GT2 10mm for Z
@@Do.ityourself
Hm thx!
So 10mm wouldn't fit for x and y?
So I will stay with 6mm!
what is the work area?
600x400