ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Install 6 Light Chandelier in Dining Room
ฝัง
- เผยแพร่เมื่อ 7 ก.ค. 2014
- Shop For Chandeliers Here:
US: amzn.to/2SNY55i
CDN: amzn.to/2KxevJS
=======
HOME TOOLS:
Milwaukee M12 Cordless 3/8" Drill / Driver & 1/4" Hex Impact Driver
US: amzn.to/2lJ5nIv
CDN: amzn.to/2mWmZRV
DEWALT 40 pc Screwdriver Impact Bit Set DWA2T40IR
US: amzn.to/32afK8E
CDN: amzn.to/2IJtaAE
14pcs Nut Driver Bit Set
US: amzn.to/2NiEwOE
CDN: amzn.to/33lNAbk
TACKLIFE 26PCS Magnetic Screwdriver Set with Case
US: amzn.to/2jMU7KC
CDN: amzn.to/2nwAGag
40 Piece Screwdriver Bit Set
US: amzn.to/31N2iqq
CDN: amzn.to/2lUonV0
IRWIN Pliers Set 4-Piece
US: amzn.to/2NvKLgV
CDN: amzn.to/325eDWS
Non-Contact AC Voltage Tester
US: amzn.to/39npIrl
CDN: amzn.to/361Y9S1
GFCI Outlet/Receptacle Tester
US: amzn.to/3dO1I3d
CDN: amzn.to/3dQHndA
========
In this video I will show you how to install a chandelier in your home. Safety first and make sure you turn off the breaker before doing any electrical work.
=======
Shop Dial2Fast Store For List Of Tools & Parts
US: www.amazon.com/shop/dial2fast
CDN: www.amazon.ca/shop/dial2fast
=======
Support Dial2Fast on Paypal
www.paypal.me/Dial2Fast
Support Dial2Fast on Patreon
www.ptreon.com/dial2fast
Dial2Fast website
www.dial2fast.com
Like us on Facebook
/ dial2fastofficial
Shop Amazon
US: amzn.to/2LqTtuk
CDN: amzn.to/2L5QASt
Join Amazon Prime
US: amzn.to/31i05mP
CDN: amzn.to/3kG0D0R
Try Amazon Prime 30-Day Free Trial:
US: amzn.to/2S3GjHI
CDN: amzn.to/3kG0D0R
========
As an Amazon Associate, I earn commissions from qualifying purchases with the links provided here.
![อยู่ได้แล้ว - LIPTA feat. Mirrr [OFFICIAL MV]](http://i.ytimg.com/vi/-9-hpntNym4/mqdefault.jpg)
I followed your instructions step by step. I successfully removed my old chandelier and installed my new one with no problem!! Thank you so much!!
Ahhh!! That’s how it goes together!!
I spent two days trying to figure out my chandelier ..as it didn’t have the instructions. I watched your video and I finally have it together. THANK YOU!!
I always wrap my pliers in electrical tape to prevent any marks on my chain.
Glad this was still here, only way I was able to understand how to remove the glass covers on my chandelier! Thank you so much!
Actually the most helpful video I watched on hanging chandeliers
Great video! This helped us install our chandelier tonight!
Just followed these directions and it worked great! Thank you!!
Thanks for sharing your experience!
This is the first helpful video I've found. Thank you!
Great video, exactly what I was looking for! I especially appreciated the detailed closeup shots. After an hour of trying to understand the direction on "what comes first" with the nuts and bolts, I gave up. While in bed, I decided to look for at som videos on hanging chandeliers. Your video was the first one I opened. It's so clear, I got out of bed and was able to put it together in less than 3 minutes. Thanks a bunch!!
thankyou for thid demonstration
That was amazing. So helpful
Great video, good method, much better than the instructions that came with my lamp. As stated below, make sure you get the right lamp wires to the black and white lines in the house. For mine, the smooth wire with writing connects to black, the rigid/square wire connects to white.
Thank you so much for this video. It was not until I viewed your video that I figured out what was wrong with the wiring in my chandelier. The wiring instructions that came with it (and how I wired it initially) were flat out wrong!! Thanks again:)
Great demonstration video. It helped me out a lot! Thank you!
+Latin Label Thanks for your comment!
Very helpful. Thank you!
I noticed that before you connected the ground wire that you did not have the chandelier wires going up through the nipple. You corrected that before you attached the ground wire. In the first scenario the canopy would not have gone on because the wires were in the way. This helped me because before this I was connected the wires first and then had a twisted mess.
I like that style chandelier, especially with the extra light at the bottom. Where did you buy it and for how much? I'm about to install a chandelier right now while watching your video. Thxs very much!
Thanks for the very detailed video. It helped me a lot while swapping out my chandelier.
theguru83 Glad my video was helpful!
thanks! totally helped my dad and I install our chandelier!
Dr., I think you did a great job explaining the video! We have a similar type lamp and looking over this video goes into detail of what we can expect, and use as a guide as well. Thanks!
Nina Goddard Thanks for your comment!
Thank you so much, you saved me !!!!!
Thanks bro your video was actually the video we needed my wife and I installed ours with few issues but all in all got it done thanks bro. Next ceiling fan. If you make one please post.
Where can i get a heavy duty chain pendant like that in chrome and brass
You should use Daylight bulbs, With yellow-ish covers it looks way too yellow. Daylight will appear to be white with the cover.
Aaaaaaaaaamazing
Looks real nice
Thank you so much for this tutorial. Quick question. We did all your steps but our chandelier is crooked a bit. Do you know how we could fix that ?
You probably need to let one of the screws come down a bit by unscrewing it some. Use a small level to see things are evening out. You’ll want to Do this from the ceiling mounting plate.
*FYI - When working with drywall in the ceiling, things kind of Eban and flow up there. It’s not always even from the start . Houses settle and we have to work around that.
So you can modify one screw by tightened it in further. If the level is still showing there’s an issue, adjust again and or take a peek at the other screw. It also may be in need to be loosened or tightened to balance out the overall project better.
Sorry if that doesn’t sound clear. I wish I could send you a screenshot of what I’m Speaking of.
Maybe Google: how to fix a crooked chandelier. As they’ll likely have images that will walk you through it.
Good luck!
Yeah. Buy a new one.
After hooking up the exact same way why would my lights be down and not bright
Thanks! this video is very helpful with clear instructions.
Thanks for the video ..... very informative 👏
Thanks for this video!!!
Very helpful. Thank you!
Best light video I have seen. Thanks
Good video!
Awesome video. I accidentally snapped the ground wire from the chandelier, is there any way I can just replace that copper wire from the base of the chandelier?
I have two sets of wires coming out of the electrical box on the ceiling (both positive and negative). Is it okay if I join the two hot wires from the electrical box to the wire from the chandelier? Then, could I join the two negatives form the electrical box to the negative from my chandelier? Thanks.
Boris Salgado жужжит, ,
Эх
nicely done...I like your vids....
Thank you!
If both wires are the same .. from the chandelier.. it goes to anyone hanging from the box in the ceiling?
Thanks for the video. It was really helpful!!
Thanks for your comment!
thanks for the video I don't have a ground wire on my chandelier what should I do.
+Ron Rosario See if you can wrap the ground onto the metal part of the light.
Nice and simple. Thanks, it helped a lot
+Felix Alonzo Glad my video helped!
Excellent vid! I'm actually going to be installing 3 new ones in my home soon. This was perfect!
xFenix A2x Glad my video was helpful. Cheers!
Wow, that is very nice. We are a lighting manufacturer
Great video bro.
Very good Thx,,,
Great video
Can the chandelier that has 120V be used to 220V?.
Thanks for the video, this help a lot. Will try to do this tonight,
John Huynh cei
LOL... He said nut.
I am changing the glass globes(shade) in the Chandelier. I switched out two of the but I can't unscrew that metal ring in the center of other. It's too tight. The others unscrewed with little effort. Any suggestions on how to loosen the ring w/o breaking the globe or socket?
Nice job thank you
If the cord is to long what do u do?
You can coil it or cut it at the junction box.
Thank you do l good job it so easy the way you explain l did it
Question?? Does the 2 screws to the electrical box sufficient enough to carry a 35 lb light fixture?
Yes, they are all like that.
I want to hire you to help me replace two chandeliers
nice
Great video! I had terrible instructions and 60 crystals to string up!
Wish I'd watched this video before I put the bracket up!!!
It is important to wire correctly. You can wire this backwards and it will still work however you may get a shock later when changing bulbs or cleaning lamp. If you have a lamp with two wires with the same color, usually the neutral wire will have writing on it or a ridge or notches. Always be careful when working with electrical wiring. Otherwise it was a great video.
Sophiecjp Thank you for that information. :)
Sophiecjp my chandelier wire with writing on it was for the black and the non-writing/blank was for the white!!!
What color is neutral cable? White or black?
Thanks I have a Hampton Bay, and it has two wires same color and one has writing but the instructions does not tell you which is Neutral, with your comment I just figured this out, thanks a Million @sophiecjp
So scared to do this right now
Can you adjust the length of the chain?
Yes, you need to use pliers to open the chain links and also shorten the length of the cable.
dial2fast Thanks so much! I'm thinking the "cable" means the electrical wiring? I'm still not sure if I want to do it myself yet. Your video helps show so many things I didn't know. I do know to turn the breaker off before you do anything. I like the way you showed how to open the links. I have put lights in before but not a chandelier.
so did you do it yourself in the end? just curious if it worked out ok..
Michael Lemontzis Not yet. I ordered the one I wanted, and when it comes I'm going do it myself. Well, with a little help from someone who can hold it up. It actually looks just like the one in the video. I ordered it from Menards. :-)
CUB NATION108 Nice, good luck with it. :)
Not supposed to connect 2 ground wires to 1 screw. Also your marettes are the wrong size
Why would you NOT assemble your new chandelier BEFORE you begin the process?? Otherwise, nice job.
It's heavy and awkward to handle when installing.
@@dial2fast Not in the air, on the ground like you did after you took down the old one. Why wouldn't you assemble it before you even began in the even something was broken, missing, etc., so you don't have a gaping hole in your ceiling while you run back to the store.
Wend
If the fixture wires were the same color, how did you know which was for the black/white connections? I have yet to find a TH-cam video on how to properly DIY wiring. Thumbs down AGAIN!
I just replaced my kitchen chandelier, both wires from the fixture were black. The wire that connects to the white wire Is ribbed. The wire that connects to the black wire is smooth.