HOW HE MADE THE ARM: Okay, For every trying to make the robot hand, heres how he did it: 1. go to 1:51 you can clearly see the arm without the hand. 2. got to 3:01 here you can see how he mounted the hand(motor) you may have to repeat that a few times to see the orientation. 3. Finally go to 3:31 and you can see a better view of the hand. Here you can see he found a grip, in the shape of a U, Then he tied a string half way through each side of the "U", then he pull the string through the bottom of the U add tied it to the server lever like a bow. How it works: when he turns the server lever it pulls back on the string, pulling the U into a V to close(more like upside but you get the idea.)
Just out of curiosity (I'm probably going to just stick to the one that you turn rather than the lever/switch), do you know what that switch is that he changes out one of the other potentiometers for? Or has he just done something to the pot to make it work like that? It looks like a blue box, he doesn't mention that he's done it and I'm brand new to this stuff so my google searches haven't been fruitful.
@@annab4931 yeah I just looked it over again and basically with a potentiometer he could control the full range of motion of the motor(that controls the grip), but he only wants open or close the grip, so 0 or 180 of the motor that controls the grip. So with the switch via some way acts as the min and max states of the potentiometer. Does that make sense?
Inam having difficulty in understanding your connection of potentio.meter and servi motors can u explain them plus what insthe component that you haave used for the gribbing the objects ???
I made this robot but it's the tx and learning led are blinking together and suddenly it starts learning but when I double tap the switch for replay it doesn't play back
what are these "D1 4 & D1 6" pins and what is this "Change the code 'while (digitalRead(4) == true)' (switch to +5V) to 'while (digitalRead(4) == false)' (switch to GND)", mean? will anyone please tell me.
HOW HE MADE THE ARM:
Okay, For every trying to make the robot hand, heres how he did it:
1. go to 1:51 you can clearly see the arm without the hand.
2. got to 3:01 here you can see how he mounted the hand(motor)
you may have to repeat that a few times to see the orientation.
3. Finally go to 3:31 and you can see a better view of the hand.
Here you can see he found a grip, in the shape of a U, Then he tied a string half way through each side of the "U",
then he pull the string through the bottom of the U add tied it to the server lever like a bow.
How it works: when he turns the server lever it pulls back on the string, pulling the U into a V to close(more like upside but you get the idea.)
Just out of curiosity (I'm probably going to just stick to the one that you turn rather than the lever/switch), do you know what that switch is that he changes out one of the other potentiometers for? Or has he just done something to the pot to make it work like that? It looks like a blue box, he doesn't mention that he's done it and I'm brand new to this stuff so my google searches haven't been fruitful.
@@annab4931 yeah I just looked it over again and basically with a potentiometer he could control the full range of motion of the motor(that controls the grip), but he only wants open or close the grip, so 0 or 180 of the motor that controls the grip. So with the switch via some way acts as the min and max states of the potentiometer. Does that make sense?
Can you please tell me the switches and those blue electrical components are I could not hear
I don’t understand, how did you build the grippers. You skipped it but had it at the end
Wow amazing. Just the pieces of mini servos.
The project looks cool but will you be sharing a tutorial of how you did it? maybe atleast one on ProjectBoard?
No
I love it! How did you mount the arduino board to the box? Is it being held in place by the wires and popsicle sticks?
With glue and hold the sticks
Please can you tell me from where you purchased the materials, links?
Can you make a tutorial about the wire connections for this project. Pls
Visit the link below the video you will find the schematic
Can you send circuit diagram
My kind of a project. Well done.
HOW DO YOU MAKE THE HAND? PLEASE RESPOND
Inam having difficulty in understanding your connection of potentio.meter and servi motors can u explain them plus what insthe component that you haave used for the gribbing the objects ???
Did you check the link below the video
can you give us a video on how and where did you connected all of those jumper wires and with codes please sir
www.robotshop.com/community/uploads/p/i/pinaut/imported/Micro_Servo_Robot_Diagramm.pdf
Circuit diagram and codes are not available in the given link?? Please help.......,..
do u have a better circuit diagram please
Nice Job, except you didn't tell us,,, How many Popcycles did you have to eat first . !
I made this robotic arm it's working but I am having difficulties in teaching it please make a video on that please
Email me i have a cool solution for you i can recommend you some great software that makes it easy to teach it ashivudhip@gmail.com
@@phillemon2810 hii bro
The schematic diagram is not available😢😢😢. When I click the link, it doesn't appear.
I made changes,please check again
He is not showing complete details about it . Vry bad
Also I can’t find the code in the link? Please help
Od Makedonija li si 🇲🇰🇲🇰?? Zosto vidov 1 denar na krajot od videoto😁😁
Can i use my arduino uno? And what if i want to make a remote control?..
That's sad that the code doesn't exist: The page you have requested has been moved or doesn't exist anymore.
Sorry
maybe this is an opportunity to learn and challenge your skills a bit then
I made this robot but it's the tx and learning led are blinking together and suddenly it starts learning but when I double tap the switch for replay it doesn't play back
3rd you can make to nice project
Great Jobs
*wow awesome broo*
I didn't know where the code is
Can you send me a link to the code you used?
um controlling my arm with the wii nunchuck
im
Wow dude
i like your comment
here comes the money (Shane McMahon theme plays)
Really awesome
🤞🤞🤞
Great robot
Excellent
If i make it with arduino uno r3, how?
good project!!
can we use arduino uno
Yes its same as nano board
Holy crap I can control 4 servos and potentiometers with a nano???
The nano and uno have the same specs
Circuit diagram and codes
Is there any fukin way I can use a DC motor instead of servo. I have like 20 of em but no servos.Or how do I make a PWM point on the DC Motor
You can't
But I can't understand it
Because you are totally not clever!
will it work on Arduino UNO?
Yes it work !
nano is just a smaller uno, it functions roughly the same
We can use 100k pote
Super
😉
GoooooooooooooooD!!!!!!!
Finally tutorial
Any one can send me what are the names of materials use for this
Arduino
22k potentiometer
Servo motor
Jumper wire
Push button
Pull up Resister 10k
what are these "D1 4 & D1 6" pins and what is this "Change the code 'while (digitalRead(4) == true)' (switch to +5V) to 'while (digitalRead(4) == false)' (switch to GND)", mean? will anyone please tell me.
اين الكود
how do i upload code on nano.... i am getting an error please help
where to get components
From online,aliexpress,ebay....
That's worth a hacklike!
Good one
Od Makedonija li si???
what motor did u use this video
Micro servo motor
sg90
can u give code pls
anyone understand how the teaching mode works?
Wow
Is it mrbeast compatible
Где код?
Wtf dude thats it , you ain't going to explain anything
Pleas say my name vipul please
Funny ass hell! LOL.
Thx👍
@@Hacktuberhello good video what are the materials needed?
things need
Ёр инглиш из вэри гуд)
prothothype
a throwable robot wow... but why.
Second
First
Instruments
111 viewer
Vinç video th-cam.com/video/vvefPQmMK-o/w-d-xo.html
370th view 12th cmnt
pls make circuit diagram easier pls @Hacktuber
Circuit diagrams not supposed to be easy 😅 It takes some time to learn how to read a circuits diagram.
@@Smileyfyofficial i cant understand it
its very hard to understand