How To Connect GOtv Channels To Two TVs (Beginner's Guide)
ฝัง
- เผยแพร่เมื่อ 2 พ.ย. 2021
- This video shows how to connect GOtv channels to other televisions in other rooms so you view the same channel displaying in all the TVs at the same time.
WORK DESCRIPTION
1. Connecting of the RG - 6 Coaxial cable from the RF OUT of the GOtv decoder to the Arial Port of the TV in the Bedroom
2. Proper connection of the F - Connector to the first end of the wire.
3. Also ensuring good connection of the F-Connector and RF Male plug to the second terminal of the wire.
4. Scanning the TV at the bedroom so as to capture the same channel displaying in the sitting room.
OUR WATCH WORD
Rofix Tech channel focuses on giving the subscribers detailed information on all types of Satellite Dish and Terrestrial(Antenna) sets Installation. Providing you with all the necessary installation tips to there highest possible standards practiced world-wide.
So, instead of spending money to fix your satellite, run a trouble-shooting, do maintenance or any other service as the case may be, I encourage you to SUBSCRIBE to this channel and learn step by step of all the Assembling and Installation yourself thereby having the privilege of making good Amount of money by doing it for others or saving up funds you would have been spending to other installers.
Please, fill free to drop any comment of your choice down below and you will get response as quick as possible. Your happiness and satisfaction is our delight.
More so, if you like this video, go ahead to give it a thumbs up, or say thank you Bonny and also if there are somethings you do not like in our videos, point it out so we can improve on it next time.
You can also visit our website to see more articles on satellite dish installation of all types at rofixtech.com
FOLLOW US ON SOCIAL MEDIA
Facebook: / rofixtech
Instagram: / rofixtech
Linkedin: / feed
Twitter: / rofixtech
![[LIVE] : ONE ลุมพินี 73 วันนี้!! คู่เอก "วรพล vs พันฤทธิ์"](http://i.ytimg.com/vi/rrOljlqse3A/mqdefault.jpg)
Mine was working at the bedroom before,all of a sudden it stop showing in the bedroom but the main tv at the palour is still showing
Thank you for reaching out to me. You need to check the connection that sends signals to the second decoder at the bedroom. In other to correct the error. Thanks.
I did mine , but is not clear
Ok Ade. Try using a device called Televes. It has the capacity of boosting both the Audio and Video quality of your decoder. Thanks.
thanks so much for your generousity,
but i have tried it and was unable to scan my TV, how can i do it
Check the Tv remote very well to locate the source button or you can fine some one around to help you out on that. Thanks.
Thanks man, i have done it but the issues i have is that is not clear as at the tv in the seating room, please wat will i do next ?
Thank you Frank for reaching out to me.
You can buy a device called Televes to boost the signal strength of your GOtv decoder, then the second TV pictures will be more clear.
Thanks.
Hello. I did it the way you showed it. I scanned my TV and also scammed the decoder, but it still not displaying.
Please what could be the problem?
Thanks
Hi Joe,
Kindly check the coaxial cable connection. Ensure that the positive and negative terminals are not touching inside the F-connector.
Also, ensure that the wire is connected to the RF-OUT to the TV so as to get the signals easily.
Thanks.
Please I don’t really understand the video, is it that you connected a wire into the socket or how exactly do you do its sir because I didn’t really see the way it’s done in the video
Thanks Mary for reaching out to me.
Connecting the GOtv pictures to another TV is done after getting the antenna installed outside and the wire connected to the RF-IN of the GOtv Decoder, then another wire was connected to the RF-OUT of the same GOtv decoder in the sitting room and run through the wall to that socket while a plug called RF MALE PLUG is now connected to the socket in the bedroom side to the TV antenna put and an AUTOMATIC SCAN is done using TV remote so that the TV will pick the same channel showing in the sitting room. I hope it is clear to you now Thanks.
@@rofixtech-bonifacenebo5498 yes thank you sir
Why can't u have the other tv showing a different channel?? That's what am looking for.
Well, GOtv decoder does not have the features of dual view connection capacity but DStv decoder does.
However, the MultiChoice company may include the feature later on. Thanks Nelson.
But mine the picture clarity in the room is poor why?
Hi Nkechi.
Thanks for reaching out to me.
You need to buy Televes signal booster device so it can improve your pictures quality. Thanks.
Can I watch two different channels on it?
No, it is a GOtv decoder. It can not be paired like DStv decoders to view different channels.
Please sir how can I scan through the TV
That's where I'm having problem
Hi Emmy.
You can scan your TV using the remote control and scroll down to search icon. That's all.
Hi
I greet you Michael.
You didn't show us how to scan tv
Hi Okoh,
Check out other videos in my channel and you will see how to scan.
Not all tv have automatic search
More of the TVs have it. Check it well.
How do you connect it to four TV in the rooms
Ewosky, it's good hearing from you too.
Well to do the connection is simple.
First, connect the RG-6 Coaxial cable to the 4 Tv sets using F-connector joined to RF-Male plug.
Then, joined the remaining ends of the 4 heads of the coaxial cables together with another single coaxial cable which will now be connected to the RF-OUT of the GOtv Decoder.
Now, to each of the Television, once you run an automatic scan on it, it will show the same channel being viewed in the Sitting Room.
I hope this explanation would help you dear. Thanks.
@@rofixtech-bonifacenebo5498 I didn't get it clear
So I will like you to do a video about it because that male plug supposed to be for two Tvs from my observation