PCV Valve Replacement for VW/ Audi 2.0T TSI DIY (How to replace)
ฝัง
- เผยแพร่เมื่อ 22 ก.ค. 2024
- Having a squealing or howling noise coming from your VW or Audi 2.0T TSI engine? Suspect it could be an issue with your PCV Valve. Here is a DIY that will show you how to replace the PCV valve on your VW or Audi 2.0T TSI engine.
Disclaimer: Please note all DIY are intended for basic information. Deutsche Auto Parts is not liable for any damage incurred during any attempt to follow the information shown in the video above.
Genuine VW/Audi 2.0t TSI PCV Valve
www.shopdap.com/tsi-pcv-valve...
Cheaper Alternative 2.0t TSI PCV Valve
www.shopdap.com/06h103495ac-p...
Volkswagen
Beetle 2012-2015 w 2.0T TSI Engine
CC 2009-2015 w 2.0T TSI Engine
Eos 2008-2015 w 2.0T TSI Engine
GTI MK5 2008-2009 w 2.0T TSI Engine
GTI MK6 2010-2014 w 2.0T TSI Engine
Jetta MK5 2008-2010 w 2.0T TSI Engine
Passat B6 2008-2010 w 2.0T TSI Engine
Tiguan 2009-2015 w 2.0T TSI Engine
Audi
A3 8P 2008-2010 w 2.0T TSI Engine
TT MK2 2008-2015 w 2.0T TSI Engine
Shop for VW and Audi Parts Here
shopdap.com
----------------------------------------------------
VW AUDI Specialty Repair Cornelius NC
www.daprepair.com/vw-repair-c...
VW AUDI Specialty Repair Kent Ohio
www.daprepair.com/vw-repair-a...
----------------------------------------------------
More info on DAP Reward Credit
shopdap.com/store/rewardpoint...
We are your number one place for VW and Audi Performance Software (ECU Tuning) as well as Parts and Accessories in the Charlotte area. - ยานยนต์และพาหนะ
This video went up 7 yrs ago and helped me replace mine in 2022. Great tutorial easy and simple !
How's it going.is it still working
@@AngeloShabazzX changed it out 4 months ago and still no problem easy cheap fix!
@@highspeed294What did it do? Mine is not idle right...
Did you get a P2187 code?
@@jeffcruz1008 nope sure didn’t
Thanks for the tutorial. I ordered a replacement today. Between you and Humble Mechanic, I was able to diagnose the issue (my hunch was right) and limp 200 miles home knowing it was just the PCV shreaking loudly. I pulled the gasket from the oil cap to equalize the crank case pressure enough to make the squealing stop.
Thank you Paul! This is exactly what was wrong in my GTI. I ordered the part from your site and it arrived today. Very easy fix, I installed it this morning and tested the car. Good as new!!
What problem did it fix for you?
I have just changed mine, thanks to this video, it only took me 20 minutes all in.
Genuine part was £110 total.
Excellent video.
Thank you.
Thanks! You saved me $256 in labor for a job that took me about 30 minutes max! Just test drove my Tiguan and it runs great....
Just replace this valve on Tiguan and the codes p0171 & p12A2 have been cleared now. Thank you guys for the easy-to-follow tutorial.
Did the codes re-appear after a few hundred miles?
These guys are great, was able to self diagnose and fix my car with the info on their site. Ordered this part on a Sunday had it by Wednesday. Just ordered new Coil packs and plugs from them tonight. Thanks!
Awesome!!!! So glad we were able to help. Thank you for your business. We appreciate it very much.
Thank you so much for this video! With minimal self engine repair experience, I was able to replace the CVV on my 2010 GTI last night! Its running so much better! Thanks again :)
While a girl who owns the a GTI MK6 2010 like me and actually replaces her own PCB valve is probably the most beautiful thing in the world cheers
Epc allume ??
2013 Tiguan. I had a P2187 along with a pile of O2 sensor and misfire codes, nine faults in total. I used my finger to plug the vent on the PCV cover bleed/vent hole to diagnose. Stupid diaphragm was torn terribly. The Doorman part is a thicker rubber bit and was super easy to swap. Thanks for the video man. Much appreciated.
Thank you so much! Worked like a charm. Only took me about 30 minutes to do by myself.
Such a helpful video-got her fixed right up! Just watch the cross-threading on those bolts. I managed to cross one. Still tightened up, thank the VW God.
Just had one replaced on 2012 GTi (CDL engine code as per Golf R) 06F129101R , had just started to have surging idle and then engine check light came on. Covered under warranty, the dealership must have been searching for the leak by spraying soapy water in the valve. Car is running much better now. Great video
This fixed my issue with P3000 & P3003. I purchase the blue driver scanner and let me tell you. It was a good investment. Tells you the top two issues for the car. Thanks! For this video! Also I had already replaced the 4 ignition coils and spark plugs.
Never saw an engine so clean...
Try visiting a new car dealer at some point in ya life 😬😂
Go inspect a 300k miles camry. Your jaw would drop
Thanks for the direct and to the point video. Helped me out a lot. Saved me money.
I ordered my new valve from DAP, watched your video and fixed the problem. Thank you!
Thank you so much for the support
I thank you so much for this tutorial! It's super simple on hind sight, but finding the origin of the problem was hard... I replaced the part and took apart the old one.. and what do you know.. the rubber on the inside had a big gap.. i was glad I replaced the part in time before the rear seal would have blown! Thank you so much!
Which rear seal blows out when you don't replace the pcv in time? The rear crank sseal? ???!!!
Thank you so much for the helpful video. I DIY'd this today on my 2014 Audi A5 cabriolet. Your gave me the confidence to do so.
I would suggest covering the spark plug holes with plastic so oil doesnt leak in there when removing the pcv valve. I would also suggest using an air can to blast any dust laying around the pcv valve before removing it too
no
Thank you for making this video, it made changing my PCV and fixing my P2187 code super easy.
gpaje Awesome. Glad it was helpful
Excellent tutorial. I was able to easily replace the part on my 09 Eos. Thank you.
Zach Southerland No problem glad we could help. Please consider us next time you are in need of parts.
2023 - this video helped me to relax the PCV in my Audi TT 2012. It has 230k miles and rolls like new!
Just replaced on my VW CC so far no more CEL! Thanks for this video
Has it given you any problems since replacing?
Thank you so much for this! Helped me replace the PCV on my wife's Tiguan.
Ok. Thank you! I was hoping not to bring it in as to avoid costs. Again Great video. Very informative.
Just had PCV valve (06K103495BL) replaced 2014 A4 TFSI. It didn`t fail but engine has 100,000 miles on it so probably a good idea to get it done. Thanks for posting this video.
It is called planned preventative maintenance. Well done.
2010 GTI here, parts I have replaced so far are
-Front 02 Sensor
-Diverter valve
-PCV Valve
When your pcv valve went bad was your exhaust burning oil?!?! I have a 2009 tsi gti and at idle in the cold it burns oil like a lot of white smoke and idk if it’s the pcv valve or what
Thanks. I did mine today on my 2012 vw cc. This videos really helped me.
- We appreciate your Support and Purchases!
Genuine VW/Audi 2.0t TSI PCV Valve
www.shopdap.com/tsi-pcv-valve-06h103495ac-1.html
Cheaper Alternative 2.0t TSI PCV Valve
www.shopdap.com/06h103495ac-pcv-valve-assembly-for-2-0t-tsi-engine-prexa.html
What’s the difference between the cheaper one and the more expensive one ?
This is For a 2012 gti ?
Thank you for the video. It was very helpful and simple to swap out.
Thank you!! This sounds like my issue from the squealing noise I am getting. I unscrew my oil cap and noise goes away until I cap it back up. Ordering part now. :) will update
Can I ask what type of noise was it making ? Mine is making like a crying noise … ima order the piece tomorrow and hopefully day fixes it …
Very clear and informative clip, thanks for sharing
Thanks for the vid, just an FYI for anyone looking to purchase a new pcv, the current revision now is “AH”....
Works like a charm! No more rough idle
+Jimmy AE Awesome... Glad to hear
To anyone looking for answers, if your car is idling weird and misfiring, this is probably your problem. It fixed mine. 2011 Volkswagen CC 2.0t.
i have the same problem you mencion there
I’m gonna fix mine tomorrow 🥰
Awesome! I just had this go bad on my 09 B8 A4 quattro 2.0T (FSI). Symptoms: High pitch whistle coming from the front of the engine (dipstick plug location) at idle after driving. Strong neg. pressure pull when trying to remove oil cap with engine idling.
(*Edit: I used a different part number for my model - 06H103495AE… I'm still not 100% sure that this is the right part. I may need to replace the crankcase seal. I highly recommend calling the dealer or experts and using your VIN to find the right part.*) Install procedure is the same except there's an additional bolt holding the coil connector line in place. The valve is right on top of the engine (easy access ~ 30 min job.) Great video!
I would caution anyone about buying aftermarket parts for this one. Based on my research it's been linked to the oil consumption issue and if the part has been through multiple revisions it's probably safest to get the latest OEM. Make sure it's the right part though.
Edit: Replacing this part has made a HUGE difference. When idle I can't even tell if the car is on. It was quite rough before. The performance has improved and the whistle is long gone.
Awesome... Thank you so much for the feedback. We appreciate it very much.
Deutsche Auto Parts- Your Source for Everything VW and Audi I did some more research and my original number is 06H-103-495J so does that mean that the latest revision of my part is actually 06H-103-495AE and not the AC?
*Edit:* Yes - confirmed 06H-103-495AE is correct number for my B8 A4 Quattro 2.0T (FSI). But I would recommend calling and confirming with VIN.
please send your vin and we will check which is the correct part for your vehicle.
Deutsche Auto Parts- Your Source for Everything VW and Audi I'll remember that for next time… I misread the description and thought this was for the TFSI so I ordered it and installed it. Obviously, as soon as I started the car the MIL came on and then I realized it was the wrong part. I needed the 06H103495AE. Since I installed it I'm assuming I can't return it so it's going up on eBay. I couldn't wait so I went to the dealer for the correct part. Thanks for all the help though. Next time I'll be smarter.
There's no way you would accept it as a return is there? I only ran the car long enough to drive around the block (
Phil Morris v
I was getting codes P0507 and P0171. The PCV valve is linked to both and changing it cleared both codes. Was easy. Was missing one of the screws which will have to wait until I get to town to get another.
I'm putting my engine back together. I bought the bent valve kit from you guys and I was what the valve cover bolts torque spec is. I'm having trouble finding it. also are they stretch bolts?
Hi, thanks for the vid made my idle so much smoother!
Do you have a video of you replacing the entire valve cover gasket for this same engine?
This video tutorial is very helpful, thank you
Thank you for this video..! helps alot.
Would 2013 allroad have same issues? I'm going stage1 tune and I have been suggested to change mine. What do you think?
Could you tell me what is the Torque spec for the nuts? I saw 8 pound foot for them.
Paul, I replaced the PCV Valve as indicated to solve code P0507. Once I was done, the engine light was still on and I could hear a slow clicking sound. The revs of the car were not smooth. Any idea what could be the problem? Thanks!
Thank you for this video. I drove my passat CC with dirty oil and suddendly my car have reduced power and hard starting with code P0016. You think this will cause this code to appear or its just timing chain related? Thanks in advanced
@Deutsche Auto parts
My pcv has failed on my B7 A4 2.0 tfsi and I'm considering deleting it. I have seen a variety of different kits and set ups to do this, but I would like to know....what set up/kits (if any) would you guys recommend as the best way to do it? You guys seem to really know your stuff, and so any input would be greatly appreciated. Thanks 👍
Suspect this is the problem on my 2008 CC 3.6 vr6. Slight misfire at idle. Recently had to have throttle body cleaned whistle noise from engine but only when under load. Had fault codes showing vacuum leaks, Dodgy o2 sensors and cat converter fault codes. From what iv been told on this particular engine you have to replace the whole valve cover as it's a non serviceable part and comes as part of valve cover assembly. Is this correct?
can it cause the epc and oil pressure low light to come on? with the vehicle cutting off at idle or when gear is engaged.
If you have some oil in spark plug well, is it too late to change this? Will changing this help it not seep anymore in the spark plug well?
Hi! I have a 2008 passat CC i get a very rough idle whole car is shaking, missfire cods and system to lean fault code, could it be the pcv valve? i have already trying cleaning MAF sensor changing sparkplugs and coils.
Should there be a vacuum when removing the oil cap when the engine is running ?
I have a 2014 Volkswagen Jetta TDI do you have a video out showing how to replace the pcv valve on the TDI? Thanks so much for your time.
My mechancic is replacing this on my 06 vw gti. He saw it in the error codes everytime he scans. My car stutters at idle and idles rough sometimes. Could this be part of the problem?
Is the pcv valve for the 2.0 the same as the 1.8t ? I got a 2014 passat tsi 1.8 and my pcv i think is bad and all i keep finding are the ones for a 2.0
on the gen 3 2.0 tsi why is there no hose going to the manifold. my gli doesnt have it. was going try and make a diy catch can bit no sure what hose to connect it to.
should this be done as PM? or just wait until issues are present? i hear this failing can lead to the failure of the rear main seal. 2014 jetta 1.8 tsi
I have a B7 audi a4 2.0t quattro, last Saturday I was driving and came to a four way. when it came to my turn to go the car completely shut off steering wheel locked up and brakes locked up. checked the battery and thats not the problem, but I notice that my pcv was crack. just wondering if that was one of the symptoms?
Why are there two hoses connected to the PCV Valve?
One that connects to the intake manifold and the other to the air intake. But why?
Very complete video. Thanks so much!
Could a bad pcv cause the spark plugs to have heavy ash build up?
@Issam Samix Belabsili: Most likely that is the top of the diagnoses list. I had the same codes on my 2009 A4 2.0T and indeed it was the PCV valve. May want to check with VW too, as these engines have proven rather troublesome.
can a broken rear and front hose connected to pcv valve cause vacuum leak and rough idle with check engine light. My rear hose of PCV valve is broken into 2 parts, but when showed to mechanic he said the front hose connected to the intake manifold needs to b replaced
I'm currently getting code P2187 with the 2.0T engine in my 2010 VW EOS. Now I'm trying to diagnose the issue.
So far the 2.0T is proving to be another expensive engine to maintain. Not quite as bad as the 2.8L VM-Motori diesel that "was" in my 2005 Jeep KJ (swapped in a 3.7L Gas V6 in its place) but at least all the non engine related parts are cheap on the Jeep when compared to the parts on the EOS. While the VW EOS is a pleasure to drive I don't think it will be a long term keeper.
HELP. What the valve right at the back left of the rocker cover. Behind the 1 coil pack? It has a pipe that runs over the rocker to the inlet? Thanks
What about replacing the hoses? Any vids on that?
We have an oil leak problem coming from this OCV valve. we have replaced it with a new one twice and still leaking. Any ideas?
That was it. Thank you.
2012 VW CC 2/0T Auto.
should you replace the pcv hose/tube when replacing the PCV
Is normal to see some oil in the intake manifold and turbo inlet hose coming from this valve?
Would this procedure be the same for a Audi A4 2005?
I have a question, the passages side valve, on top of valve cover what is that called , I think its where the fresh air comes in, my question is can that passenger side valve be replaced i can't find a video about it, its just a hose that connects to something there on top of valve
Will a bad PCV valve cause oil consumption? My son’s 2013 VW CC is burning much oil but no visible leaks. Please advise. Oil pressure light flashes on then goes off.
2012 VW CC. Consuming a LOT of oil. Could this be the issue? Bad turbo? Bad piston ring?
I noticed you guys had the Genuine VW/Audi part, and also one manu'ed by Prexa (at almost half the price). Any insight you can give us on how the price differs so? Thanks.
Question.. I have an 11 A3 2.0. Just noticed it’s using oil and idle gets erratic when I pull the dipstick like it’s sucking air. Would this be caused by the Pcv valve not working correctly? Thanks!
I just replaced my valve and realised that the previous valve was aftermarket Vaico brand and had been replaced less than 2 years ago, about 25K miles. I was getting different check engine codes from faulty O2 sensors and also faulty catalytic converter. Once I replaced the valve with a VW/ Audi from the stealership the codes went away in less than 5 seconds after the valve was replaced. Paying the extra price at the stealership may give you peace of mind and not having to replace within 25 K miles. Also, the previous valve was leaking quite a lot of oil due to the gasket having gone bonkers! No more Vaico aftermarket for my MV.
Hi Paul, is the Pcv valve also known as oil separator? Volkswagen is recognising this part as a oil separator.
I have a volkswagen cc 2012 . My question is can a bad pcv valve cause a low oil pressure?
Hello, @Deutsche Auto Parts . I replaced the diaphragm and the howling noise disapear, but days later I noticed that I had a oil leak between the engine and the transmision (DSG). Could help me if This leak can cause the no-replace the all PCV valvue for a new one?
* the engine sounds good
Many thanks
Regards
i need one for an A4 quattro 2010 will this fit ? is this your last price ? let me know Marcos Robles thank you
Can you clean the original pcv assembly and reinstall while waiting for the new one?
Got a 2010 CC with the 2.0t and the engine has a lean code and multiple misfire code. MAF reading under 1 on live data and no vacuum leaks found. Crankcase vacuum when removing oil filler cap is minimal when running. Could this be my issue? I replaced MAF sensor to no avail and with same low readings. Bout to pull hair out!!! Thanks in advance.
what is the torque spec for those screws of pcv?
Is this the same process with a 2014 mk6 Jetta 1.8t se?
Very good video... clear and concise. However there is a tightening sequence for these small bolts and a torque value of 11Nm. Unfortunately at time of writing i cant upload the picture that shows the tightening sequence. Sorry...
How much does the "rear pcv valve pipe" cost? I cant find the part # anywhere. I have a 2014 vw Jetta se 1.8t gas . Can you help me with the part number .
Question can a faulty PCV valve make car use more oil consumption?
I HAVE A 2010 A5 CABRIOLET. WILL REPLACING THIS FIX MY OIL BURNING ISSUE? BURNING ABOUT A QUART PER 130 MILES OR SO?
What about whisle noise, low oil pressure and no codes at all? Is it PCV valve?
I gess this is my problem wit my 2010 vw passat cc simptoms You explaned in frst 2 min, came up for me . Thanks after i replace my PCV valve may stop my problem .
Can a bad pcv valve give you a too rich at idle code? P217800 and p218800
Is there a PCV Valve on TDI engines ?
Idk if anyone has ever experienced this but I just replaced my pcv and now whenever the car is warm after driving Im getting a constant squeak at idle and a louder one when shutting the car off. Sounds like it is coming from the passenger side of engine bay. Any input would be nice. Thanks
GOD BLESS YOU.
EXELENT VIDEO
👍🏾
Do you think code p0016 is associated with this part ?
What is that yellow valve for? Is it breather valve or what?
I recently bought this part from you guys and has worked great so far but when I was first diagnosed to replace the old one I was told my car was burning too much gas due to taking in too much air and was told by the vw dealer that a computer reset was needed so the car could go back to regular gas efficiency, my request is if you guys could make a video of how to reset the computer or simply instruct me through here? I would really appreciate the help. keep up the great work!
You should have your codes erased by a local shop or Autozone might be able to help you erasing them.
Deutsche Auto Parts- Your Source for Everything VW and Audi I took care of erasing the check engine code that was no trouble at all, I mean resetting the computer so it can burn air/fuel like it used to before unless I'm mistaken. ps thanks for answering so promptly.
I have a VW mk7 2.0 clubsport 2016 with an engine light, the trouble code is P227000
lambda probe 2 cylinder row 1 signal too lean. what do you think?
A bad labda probe
Or
A bad PCV Valve?
thanks for your response!
Is this repair the same on a 1.8 tsi?