3rd Gen Toyota 4Runner Turn Signal Blinker Switch Repair and Replacement
ฝัง
- เผยแพร่เมื่อ 28 เม.ย. 2019
- Teaching you 3rd Gen 4Runner owners how to fix a bad turn signal switch.
Irvin Ratcheting Screwdriver - amzn.to/2DBRIJi
Trim Removal Kit - amzn.to/2GNf5QN
You can purchase parts from East Coast Toyota Restorations by contacting them on Facebook. Just let them know what you need
/ ectrestorations
Thanks for watching! - ยานยนต์และพาหนะ
![ตีสิบเดย์ [FULL] | ครอบครัวสะท้านทุ่ง "นางบี & อ้ายสติ๊ก"](http://i.ytimg.com/vi/A1rhYcxxNtA/mqdefault.jpg)
![ความรักไม่ได้น่ากลัวขนาดนั้น (TRUST ME) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/9np-lAtCRpQ/mqdefault.jpg)
Both chilton and Haynes said to remove the steering wheel. This guy saved me saved me a lot of time!! 👍👍
Great video! Just replaced my switch; very easy to do! Dealer wanted over $900 to do this; said part was over $600! That sounded high, so I checked and purchased a genuine Toyota switch for under $200.
Great job!!
Great Video, it was easier than you made it look. The hardest part was putting the two steering column pieces back together and that only took 3 tries. Thanks again for the Video.
Thank you
Having this same issue right now. Glad to know it's a cheap and easy fix, as with most issues on 3rd Gens! Thanks for the video!
No problem man! Hope it fixes it for you
Thank you for this! Saved me lots of time and effort.
Just bought a 2002 4 Runner today that’s got this problem 😳 but ya made it look like a simple out and in install , only a couple of tools , no hammer chisel or dynamite 💥needed 🤣. Thanks for posting 👍
Bro thank you!!! Didn’t know it was that easy!!
Thanks for the video! Just replaced my switch following your instructions!
Awesome man! Glad the video helped you out!
Thanks for the Video and help..The shop asked me for 450 dollars to change the switch, and it seemed strange and unreasonable to me. Now I see that I was right. The video of him is better than other more confusing ones that I saw before. Here is my like in support of your effort. Thank you very much for helping other people.
I really appreciate the comment. Glad my video helped you
Thank you so much for this! So helpful.
Great video, THANKS!!
Thank you!! The only other video I found had to remove the airbag and steering wheel,.. problem solved in no time
Thanks for the comment about the fog light switch, saved me from replacing the incorrect part
Nice, you are welcome
Extremely helpful, thank you.
You are welcome! Thanks for watching
Thanks for this one! I went through the stalk replacement and my issue didn't go away. I tried my hazards and they worked so my searching lead me to a fuse. Pulled all the fuses under the dashboard to the left of the steering wheel and all looked well but when I put them all back I figured hey, might as well give it another whirl and lo and behold my turn signals work again! Lesson for me was try the fuses before spending $200 on replacement parts :)
Glad you got it figured out! Thanks for sharing!
Thanks! Works perfectly now.
Glad to help!
Thx for the clear instruction! I look forward to more 3rd gen 4Runner videos
Yes sir, thanks for taking the time to comment
+Felix Gutierrez thanks!!
Great video big dog. Helpful
thanks for the video, this was my exact problem i had. keep up the good work
Nice, thanks for taking the time to let me know!
Thanks for the how to video! Appreciate it
Yeah man, thanks for watching
Thanks for the video. This solved my problem.
No problem, thank you
Best generation of the 4Runner. Last one made in Japan.
Thanks for this video, I was able to replace the turning switch on my own :)
You are welcome! Thanks for the comment
Does anyone know the part # on this for a 2002 SR5
I got a 2002 Toyota 4runner SR5 and there are NO turn signals. What would be a good way to diagnose my no turn signal issue.
1)Try removing and and inspecting fuses
2) Replace flasher relay behind fuse panel.
3)check hazard switch
4) replace turn signal stock
Any other ideas??????
Will this also fix the "buzzing" sound when using the turn signal? Mine will make the sound and not go away unless I do a micro adjustment but then it won't even blink
Most likely if the noise is coming directly from the switch itself. Is that the case?
Btwillia's Garage I'm assuming so because it only goes off when I engage my left blinker and it doesn't go away until I reset it. Figured I'd clean the electrical part but it seems like replacing it may make more sense
@@iAmAlby I agree. Just be sure to buy the right one based on if you have or want fogs or not 👍
What tire size do you have? And also do you have a lift?
Sick 4Runner!
Hey! I appreciate that! It's just a Rough Country 3 inch lift. Tires are 33s (285/70/17)
So my hazards don't flash either would that be a relay problem?
Not that means you have another issue such as a blown fuse, wiring short or disconnected plug
You know the part number?
How much did the replacement directional unit cost?
I can't remember exactly, but I want to say $20 or $30
Can someone point me to a video of where I can find a fix the turn signal stays on when my lights turn on not the running lights but when I turn the head light on.
Sounds like you have the positive wires for each potentially pinched together and sharing a signal. It could be in the switch itself and I would probably start there
How much was the part ?
If I remember correctly it was $25 or $30 used. They are running low in stock from what I hear so you may need to pay $50+ on eBay