Hi, any advice on how to identify a gas gas 50 - 21/22 either bay the frame number or differences in the bike itself. Trying to identify a bike I might be looking to buy off a friend
Hi Cam I sure will when my boys 50 needs one. In the meantime have a search around youtube I have seen some great disassembly videos from fellow youtubers
Hi James, I've just ordered an EHR racing cylinder head for my kids 2021. Have you any experience with these? They come with a 0.8mm squish insert. This seems really excessive. Do you think this will be OK or am I better using standard gaskets etc
Hey Dave, the aftermarket head will give you more compression with the smaller squish, meaning more power. I would be running the .8 as EHR reccomends to get the most out of the new head. In saying that you will need to make sure your running quality gas, where abouts are you located? Here in Australia we don't have great access to race fuels so I would reccomend Caltex98 pump gas.
@@jameswharton3143 Hi mate, thanks for the reply! Im based in Ireland so we have access to regular unleaded or super unleaded at most petrol stations. I usually run the super unleaded most of the time. Is the 0.8 that comes with the EHR not a larger squish than standard? Im a newbie auto dad and my wee boy is just starting ti ride fast and doing quite well so i was wanting to improve his starts a wee bit. Thanks bro
Hi mate
Did you say you’re running a 90 Main and 48 Pilot jet in the 50?
James can you show how to remove, clean and replace a fuel tank on a husqvarna TC 50 haven’t a clue how to remove all the plastic etc 😟
Hi, any advice on how to identify a gas gas 50 - 21/22 either bay the frame number or differences in the bike itself. Trying to identify a bike I might be looking to buy off a friend
Thanks
I’m wondering if the swingarm and front forks fit the 2018 ktm 50 sx off of the gas gas 🤔
Hey I believe the forks would. Swingarm changed in 2020 so I don't think that will a straight swap
Can you do a clutch rebuild video on these?
Hi Cam I sure will when my boys 50 needs one. In the meantime have a search around youtube I have seen some great disassembly videos from fellow youtubers
@@jameswharton3143 Yeah righto, thanks
Hi James, I've just ordered an EHR racing cylinder head for my kids 2021. Have you any experience with these? They come with a 0.8mm squish insert. This seems really excessive. Do you think this will be OK or am I better using standard gaskets etc
Hey Dave, the aftermarket head will give you more compression with the smaller squish, meaning more power. I would be running the .8 as EHR reccomends to get the most out of the new head. In saying that you will need to make sure your running quality gas, where abouts are you located? Here in Australia we don't have great access to race fuels so I would reccomend Caltex98 pump gas.
@@jameswharton3143 Hi mate, thanks for the reply! Im based in Ireland so we have access to regular unleaded or super unleaded at most petrol stations. I usually run the super unleaded most of the time. Is the 0.8 that comes with the EHR not a larger squish than standard? Im a newbie auto dad and my wee boy is just starting ti ride fast and doing quite well so i was wanting to improve his starts a wee bit. Thanks bro
Moths ate your jeans bro 😆