Black Aces Tactical S MAX disassembly and cleaning after 750rds
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- Take a look inside the Black Aces S MAX 12 ga shotgun after firing 750rds. I will break it down, clean it and reassemble.
Remember, I am not an expert on anything. My opinion is worth exactly what you paid it, nothing. Take everything I say with a grain of salt since it's based entirely on one person's experience. Always do your own research. These videos are simply a way for me to share my experiences as a consumer with other enthusiasts.
Nice! Thanks for the videos on the s max. I got a couple and dont have near the round count as you do but my experience has been the same. Good deep cleaning out of the box and zero stoppages in any of them so far. Great deal when they are on sale. Thanks again!
After 4 or 5 tries of disassembly and learning how it functions and when to or not to lock back the bolt I am amazed at how quickly and easily this gun can be disassembled and reassembled! Love it! ❤
These are basically Remington 1100 / 11-87 clones, but with the recoil spring moved to the front (honestly a major improvement). Not heard much bad about them other than a steady diet of 3" magnum shells can wear them out quickly. Stick to 2 3/4" and it seems to last a good long time.
Great S Max cleaning video, I'm going to post it on my Facebook page Black Aces Tactical Watch!
Love my Pro Series S Max?
Thanks for the info! Only have a couple boxes through mine but will need to clean it soon. The manual was written by someone who is unfamiliar w/ English language!
Thanks for the video. Seeing is much better than just trying to go by some of the manuals. Love the end!
Excellent video - thanks! I first came across your channel when you were building out a KP-15. Love your stuff. Subscribed.
Will remember this video when I have to clean mines lol Thanks for posting and sharing your knowledge/experience :)
Thank you for the in-depth breakdown!
Maybe better lighting, lighter surface, closer, above the gun POV….just a suggestion.
Agree with dennis1979gm below. I picked up the black stocked model and liked it so well I bought the brown walnut version also! Thanks for making the vids!!! Maybe a thin silicone gasket before the second lock ring will prevent it coming loose.
Silicone gasket will likely hold it.
I ended running with a few drops of pink loctite. It seems to be doing the trick so far.
@@dfwguncleaning7523 mine out of the box is having a problem where the bolt locks back after the first round, jams as well, any ideas?
Here's a tip for that nut that keeps coming loose. Use about 1 to 2 wraps of narrow teflon tape in the threads. It will help keep it tight by not vibrating loose as easily, yet will never gall. Replace it after every tear down.
Or a drop of blue Loctite. I prefer that.
@@WardenWolf I've done that too, but the teflon leaves the threads clean....(for those who are OCD..) 😅
Only got 15 rounds through mine will wait to clean
Instead of contaminating the bottle of Hoppes #9 by dipping your cleaning brush in it, take a small container and pour out enough bore solvent that you will need and dip your brush/wet your patches from it.
Dude, I'm not an AK guy, but you've got a nice collection! I really like that OG Galil!
Super video! Thanks!
I love the music... almost crying :D
Hello! Do you have any guess what the black finish is on the receiver, barrel and end of mag tube??? BAT doesn't know!
Maybe baked Ceracoat? What do you think? I hope it's durable!
It's doodie!
Recently bought a Black Aces S4 tactical shotgun, would love to add a magazine extender that holds 2 extra rounds so I can have 7 plus one rather than 5 +1. Any suggestions where can I get an extension that holds two extra round. Thank you for a very detailed video
A question about reassembly.
How tight does the nut that retains the barrel and spring have to be? As tight as you can get it with your fingers or should it be wrenched tight like Eric Lemoine does it on his BAT video with plastic jawed channel locks? (Which seems excessive to me!)
Thanks!
I’m not using a tool to tighten a nut that didn’t require a tool to loosen. That’s just my opinion. I didn’t read the manual. The nut seems to be designed to properly lock down when torqued by hand.
What gun is this a clone of? Beretta 1301? Benilli super 90? And aftermarket parts for this like stocks or a rear ghost sight?
Good cleaning video. I like the very end out take reminds me I'm not the only one.
Can anyone tell me if Black Aces has a rifled barrel for slugs available?
subbed for more of this black aces content
More to come soon. I’ll be running this one up to 1500rds as soon as hunting season comes to an end.
can we replace barrel from 18.5 to 24 inch? BLACK ACES TACTICAL PRO SERIES SMAX 12GA
Anyone know what mount fits to the top of this shotgun? I see there’s a mounting slot and was hoping I could install a ghost ring rear sight.
Cab you get magazines for the blackaces lever action
I can not get the magazine tube off. I need to install a shell plug for hunting use.
aside from the punch, are you ever supposed to use tools on guns? Just a wrench to snug up those 2 nuts?
I have drawers full of tools I use exclusively on guns. Definitely pick up some hollow ground screwdrivers and a decent punch set. A punch block and a vise come in handy too.
I have a problem with my hand guard nut walking loose after every mag tube. Also, my my forend cracked. not all the way through though.
Video lagged, I put a piece in wrong and now it's locked in. Any advice? Lol
16:59 😂
Bought this gun and won’t cycle the shells I use anyone ran into this?
How do I change the stock on this gun
I've read you can get a "Turkish Shotgun Stock Adapter" and then use a Remington 870 stock.
I can't pull the charging handle out it's like if it's glued in
I have the same issue, did you ever figure out a solution?
Same problem here!!!
Yeah , not cleaning a gun for long periods of continuous use is not smart , and can cause extensive damage to the gun. Carbon build up in bolt locking recess's can cause catastrophic failure .
shotgun ammo is very dirty , clean and lightly lubricate your gun at least every 150-200 rounds and it will last.
Would be helpful if the camera were closer.
SERIOUSLY?🤣
I couldn’t get my barrel off
It should come out pretty easily. If the action is extremely fouled, it may need a little encouragement.
read manual......... before you disassemble. SLIGHTLY pull bolt back an inch and the barrel fall out
What manual do you see this? Not on black aces website for this gun