#Rooftop
ฝัง
- เผยแพร่เมื่อ 25 ก.ค. 2019
- It's a tutorial for "Shadow analysis of Solar PV Plant and How to utilize the area of the roof to install the Solar Module"?. It's a pre-installation process to work out the maximum possible plant capacity for a particular location.
This is the SketchUp Training part 2
(SketchUp Training Part-1 Link: • #Sketchup Training for... )
This video covers:
The Drawing of PV Module?
How to provide the tilt angle to the module?
How to analyze the shadow of any object?
Azimuth Angle consideration during drawing?
Interrow Spacing & Pitch explanation for PV Plant?
How to calculate Plant capacity? etc.
Make sure you subscribe and never miss a video:
/ allaboutsolar
PVsyst Training Episode-1
• PVsyst Software Traini...
SketchUp Training Episode-1
• #Sketchup Training for...
Solar PV Plant Survey Tutorial- www.youtube.com/watch?v=5kYPd...
How to find the Latitude & Longitude from Google Maps:
www.youtube.com/watch?v=v6niw...
My Facebook Page: / amiyakp7
Follow me on Instagram: / solarallabout
Follow me on Twitter: / amiyakp1
Follow me on LinkedIn: / amiya-krishna-panda-15...
Thanks,
Amiya - วิทยาศาสตร์และเทคโนโลยี
Huge respect. Thank you
Means a lot Sir 🙏
Thank You for helping 🙏
Thank you very much sir I ' ll try this
You are very Awesome beoc you teaches us free of cost
🙏🙏 Jai Hind 🇮🇳 Sir
Thank You so much Arvind. It sounds good, when I realise that I am giving something free of cost.
Jai Hind..
Thanks,
Amiya
Free online Training of solar PV system design already started.video already posted.
Episode 1
Episode 2
Episode 3
Training Session 1
Training Session 2
Attend the videos
#DESIGNJAZZ
Watch Playlist
Thanks for nice video, very informative for basic learner :)
Yeah I make this one for basic understanding. Thanks for your support.
Thanks,
Amiya
Thank you for the video!, very informative and a well done video
Thank you very much. Please share it with your friends so that we can educate people about Renewable energy.
Thanks,
Amiya
In which location you peoples
I am from Kolkata but staying in Delhi.
Thanks,
Amiya
Really nice vedio lots of information I got from this.
Thanks for your Support. Please share it with your friends. Lots of new content coming up for Solar training.
Thanks,
Amiya
Thanku sir
Thanks alot
Thanks .The south side neighbor's wall is across the road measuring 10 mtr. The west side neighbor's wall is adjoining my house. How to represent this in Sketch Up for shadow analysis.
Nice sir
Bhai very good effort I really impressed
Thank you so much. Please share this with your friends so that we can educate people about Renewable energy.
Thanks,
Amiya
Nice
I would suggest using Skelion Plugin for inserting the module of your choice which also enables PVWatts for energy generation estimation
It's the basic of sketchup, for the beginner.... I have also uploaded a skeleton video as well...Please check the below link: th-cam.com/video/q0k9fMaIxHs/w-d-xo.html
weldone
Fantastic video for beginners.Good efforts brother.Keep it up.
Thanks you so much. Please like & share my videos with your friends.
Thanks,
Amiya
@@AllAboutSolar sure
amiyaji great
Brother, its a very good video, please keep it up. I expect you will guide us more videos on solar related design softwares!
Thank you Shakil. Yes, The motto of this channel to educate people about Renewable energy.
Thanks,
Amiya
All About Solar
th-cam.com/video/aO2xytlbGkA/w-d-xo.html
Hi, when I move the modules @11:30, it clashes with the pillar and the modules disappear when I try to move it further north
Please make a video on complete SOLAR structure design in AutoCAD. Structure layout, Fabrication diagram, structure diagram.
👌Helped
Thank you
Hi sir which software version u use for this drawing
Brother which software u have used for screen recording?
Is there option of marker and zoom in that software?
I use Apowersoft for screen recording and Zoomit for Marker & Zoom.
Thanks,
Amiya
All About Solar
Hello sir, please help me in purchasing sketchUp software,, please guide me which version of it should I purchase and what will it cost
very good
Thanks
Nice video
Thanks.
@jeetendra kumar sah All About #Solar at 20 degree what ia the Front leg and back leg and what is its shadow from the back leg if the para fit wall 3 feet plz tell me any one
Can u give the short key that will help full for seeing any object in any direction in sketchup as u use in this video? especially in pitch selection between the module string. 11.22 time
I got your point. To do that you have to press on the scroll button of mouse and move the mouse accordingly. For more understanding, please go the below link and watch the video from 9.27
Time.
th-cam.com/video/VeSsu5QEWQw/w-d-xo.html
Thanks,
Amiya
All About Solar
If i take 5.30 and time is 15.00 than my total screen under shadow i think i have put some wrong commands can you help me
Can you make first solar structure and after putting solar module over it. ?
Because In this video you are giving jus height but structure is not showing here.
Thank you
Yeah we can do that. But, during the first stage, I am just giving here the basic idea. If structure comes in the picture it will become more difficult. As you suggested, I will definitely make a video on this.
Thanks,
Amiya
Can you mention from where did you get the general guidelines like 24 mm between two panels etc?
Great video, by the way, very helpful!
It's besically the industry standard. Some people consider it 20 mm, extra 4 mm margin for module alignment adjustment but it varies as per specific requirement and other details like module dimension, pitch, clearance these considered here as standard. It can varies project wise.
Thanks for your support,
Amiya
All About Solar
@@AllAboutSolar Had one more doubt, can we mount the solar panels directly on the roof at a tilted angle rather than having them a bit above the roof like you have done?
@@sejald5340 Yeah you can do that. But, that is not the right process always you have to give minimum 300mm Ground clearance. As per the Net Metering policy, it should be 400mm.
Thanks,
Amiya
All About Solar
Hello Sir, Your video is very helpful. Thanks for share. Can you share video of skechup that how to make solar structure. If you was share then plz share link. Plz reply..
Thanks..
OK, I will make a video about Solar Structure.
Thanks,
Amiya
All About Solar
There is a high rise wall of neighbor's houses on the south and west side of my house whose shadows are coming on my roof where I intend to install my solar panels. How to analyse this in Sketch Up that my installation will be shadow free all through the year. I also do not have the accurate measurements of the heights of the neighbor's walls.
In this case, you can easily know the heights of the buildings through the number of floors. Generally 1 Floor= 3.5 mtr, if it is 3 floor bldg, Ht= 3.5 X 3. Then you have draw your building and give the proper height. After that cross check if shadow is coming in between 9AM to 4PM for 21st December.
Thanks,
Amiya
All About Solar
Drawing design in sketchup software then how can i upload in pv syst??
For that you have to use Skelion plug in in SKETCHUP th-cam.com/video/q0k9fMaIxHs/w-d-xo.html
Please watch the above video for beter understanding. I am going explain the same on my next video.
Thanks,
Amiya
All About Solar
Very helpful video!
In shadow tray, which 'UTC' is applicable for India? Is it +5:00?
For India u can consider it as +5:00 to +5:30, preferably consider it +5:30.
Best video for beginners, can you please explain structure design also by using sketch up
Yeah, it's in planning will upload soon..
th-cam.com/video/aO2xytlbGkA/w-d-xo.html
It is recommended to draw structure design on AutoCAD for precision
Could you tell me the height maintained from rooftop to lower edge of the module?
500 MM
excellent presentation and modeling. Can you explain to me why the radiation window is from 9 to 15:30, I do not understand this concept, thanks and greetings from Colombia
Thank you Marin.
As you know Solar Generation depends on Solar Irradiance, in India during winter season before 9AM and After 15.30 PM the generation becomes low due to the low irradiation that's why when we do the shadow analysis, neglect these low radiation part.
Thanks,
Amiya
All About Solar
@@AllAboutSolar Thanks Amiya
this topic of analysis is very interesting, thanks for your response and video greetings and thanks!!!
It's my pleasure.
I try to 3D design in pv syst but no idea how do it
Don't worry I will upload it very soon.
sir can you plese tell me that how to make video of this shadow analysis
th-cam.com/video/yTqQa_iJKQQ/w-d-xo.html
Please go through this link. Just create a scene of shadow movement and export the scene as animation.
Thanks for your Support, please share the same with your friends.
Thanks,
Amiya
Which software are use for shadow analysis please sir
Google SketchUp
hello sir isme direction kaise change kar skte hai,
east west north south
Through the rotate option. Please watch the video carefully.
Thanks,
Amiya
All About Solar
thanks for the video.please do pin the link for previous video.
th-cam.com/video/VeSsu5QEWQw/w-d-xo.html
Hi Bro can you help me to do shadow analysis for my solar system please
Yeah, off course bro.
Time selected is UTC +5.... but at 9 am my sketchUp shadow option is showing full darkness and showing day timing is from 11-7? whats the issue?
as well as my shadow is too long
Have you added the location through 'Add Location' Tab ?
Please watch the part-1 of Sketchup training.
Thanks,
Amiya
All About Solar
th-cam.com/video/VeSsu5QEWQw/w-d-xo.html
After you construct a drawing in sketch Up, How to set the North ?
In SketchUp, you no need to set the North if you import the Geo-location. I also explain the same in this video. Please watch the video from 1.42, where you can see the front side is South.
Thanks,
Amiya
All About Solar
@@AllAboutSolar To show the drawing to client that the design is shadow free , I need to mark North and also the date and time of summer and winter solistice .
By using 3D text you can do that. In Large Tool bar there is a logo 'A', you can use the same.
Thanks,
Amiya
All About Solar
Which software is this?
Sketchup Software. Its an architectural design software but it can be use for Solar designing purpose.
Thanks,
Amiya
Knsa software use kr rhy ho ap
Sketchup software.
Could u pls make same course but in english?
Full course available in English please contact at support@heaveninstitute.in
Why you set 21/12
Date for shadow analysis ?
This is the Shortest Day of the Year in Northern Hemisphere, so the shadow will be maximum on this particular date.
Thanks,
Amiya
th-cam.com/video/aO2xytlbGkA/w-d-xo.html
Solar sketch up ka course karne k liye Kaun sa course karna padta h
Jaise aapne Kiya h
Please bataye sirji
Main to koi course kiya nahi hu, kaam karte karte sikha hu...lekin tum agar course karna chahte ho Sketchup ke upar..mera ek training programme hai aap wo join kar sakte ho...If you are interested, ping me on whatsapp @9831633226..
Thanks,
Amiya
Which is this app
SketchUp...
Can you give service for our projects
Yes Mr. Vinay we do provide design and consultation services for Solar Companies. For any kind of service you can connect me at solarallabout@gmail.com
If want to increase the hight of the structure
You can give it you blue axis. but in that case, you have to design the structure accordingly.
Thanks,
Amiya
All About Solar
Sir plz tell me front leg and back leg in this video plz
It's a structural calculation, I can't tell you just like that. According to the tilt angle of the structure we can decide the Front leg and back leg height...
Thanks,
Amiya
All About Solar
All About #Solar at 20 degree what ia the Front leg and back leg and what is its shadow from the back leg
@@AllAboutSolar if the parafit wall 300 feet then the front leg 3.5 feet so back leg 6 feet what is the shadow of the back side pls tell me
@@jeetendrakumarsah580 All About #Solar at 20 degree what ia the Front leg and back leg and what is its shadow from the back leg if the para fit wall 3 feet plz tell me any one
Can u please help me with my project?
Yeah, off course....
Name of the software
Google SketchUp....
Use skelion plugin
th-cam.com/video/q0k9fMaIxHs/w-d-xo.html
Gaid line contek
Why You didn't mention latitude and longitude anywhere , while doing shadow analysis ?
Please watch part-1 of the SketchUp Training series:
th-cam.com/video/v6niwC9yyqc/w-d-xo.html
@@AllAboutSolar Sir, in part 1 you used latitude and longitude to grab to the satelite image but you didn't use latitude and longitude for shadow analysis.
Please go through the video thoroughly from 7:38 time...When you grab the latitude & longitude, the software will automatically take the Sun Path data from it's database.
I hope you understand the same...
Thanks,
Amiya
@@AllAboutSolar ok.
Thanks sir
english subtitles please 😭sir
Ok, I updating the same.