【RC車庫】Engine Repair Stand build-1/10引擎維修架製作

In order to demo the V8 engine I made earlier, I used some ABS square plastic pipes to make an engine repair stand. Because I was worried that it would not be able to support the weight of the engine, I added metal PINs, turntables and finally locks to the engine at the upper and lower points of the main support. Yes, 1.2mm screws were used. Fortunately, the final result was not bad. It was quite strong and could stably support the previously made V8 engine (it has some weight because it contains a motor and bearings).
為了展示先前製作的V8引擎，我用一些ABS方形塑膠管製作了引擎維修架，因為擔心無法支撐引擎的重量，因此在主要支撐的上下點，都追加了金屬PIN，轉盤與最後與引擎的鎖點，都用了1.2mm的螺絲，還好最後的結果還不錯，還算堅固，可以穩定的支撐先前製作的V8引擎(因為內含馬達與軸承等，所以有些重量)。
#RC #V8 #Engine #Garage #scalemodel
Camera: IPhone 13
/ jjyancrawler
/ jjyancrawler

[@brucewwww1]

有神快拜.厲害厲害