20 min. Great gift or easy craft sale!..
ฝัง
- เผยแพร่เมื่อ 28 ก.ค. 2023
- Here I turn a piece of Padouk wood into a fun little Pendant..
I also show how to make the pendant jig..
so simple and fun to make..
please contact me at... andyscornishcreations@gmail.com
If you would like to support my channel… you could do so by…
buying me a coffee… in the link below… its a one off payment…
its not expected but very much appreciated…
www.buymeacoffee.com/AndyPara...
Disclaimer
this is not a tutorial .. this is the way that I like to work… you must only do what you deem to be safe… - แนวปฏิบัติและการใช้ชีวิต
Love this quick, low cost jig. Very nice detailed guidance on the making.
Hi Bob...
I'm glad that you have found it useful...
Take care my friend...All the best.....Andy
Always interesting Andy. Love the fact you still have a bit of bacon in the fryer for later. Cosy
Hi Brendon...
I'm glad that you found it interesting...
Haha ... I like it... unfortunately that's not bacon.. it's a couple of strips of sand paper...
I had to check the video to see what you meant and it really did look like bacon...
Take care my friend...All the best.....Andy
Very nice pendant and what a great jig for turning them!
Hi Luie...
Thank you very much...
Yes... very handy...
Take care my friend...All the best.....Andy
Love it ..including the jig making
Hi Steve...
I'm glad that you liked it...
I really enjoy making these pendants... quick and easy...
Take care my friend...All the best.....Andy
Very nice Andy! I found the making of the jig every bit as interesting as the actual turning of the pendant. I’m certainly going to have a go at both! I just know I’ll be the guy chiseling my jig off the worm screw as the CA dries!! Thanks again. Cheers, Rick
Hi Rick...
Thank you so much...
I'm glad that you found both parts of the video interesting...
I'm always happy when someone tells me that they are going to make their own... both of them as well..
Haha... whilst that would be very funny to watch... I hope that it all goes smoothly...
I hope that you will enjoy making them...
Take care my friend...All the best.....Andy
Great demo Andy, useful info on how the jig was made.
Hi Gary...
Thank you very much...
Glad that you found it useful...
Take care my friend...All the best.....Andy
Very good video with good production quality. Thanks. (NC USA)
Hi Clarence...
Thank you for your kind words.. I'm glad that you liked it...
Great to hear from North Carolina...
Happy New Year...
Take care my friend and all the best...Andy
Great demo! Going to try the jig and a pendant. Thanks
Don
Hi Don...
Thank you very much..
I hope that you will like yours...
It would make a good club project...
Take care my friend...All the best.....Andy
HI Andy. Nice little quick and easy pendant on a home made jig. what more can one as for. Well done. A very simple and quick fix until you get that other revolving tail centre is place a small 6mm washer on the point of your current centre. It will still allow you to centre the piece without such a deep point mark in your wood blank. Cheers Jim
Hi Jim...
Thank you very much for your kind words as always...
Ahhh yes... great tip that... I will definitely be using that one...
Take care my friend...All the best.....Andy
Great job, Andy! Neat little jig!
Hi Billy...
Thank you so much as always...
Take care my friend...All the best.....Andy
Quality as always Andy.
Thnx Andy, I really enjoyed watching this!
Hi Leo...
My pleasure..
I'm glad that you enjoyed it...
Take care my friend...All the best.....Andy
Great demo Andy, nice to see how you make your jig thank you cheers zpaul.
Hi ZPaul...
Thank you so much...
I'm glad that you found it interesting...
Take care my friend...All the best.....Andy
Great video. Looking forward to giving this a go.
Hi Lathingabout...
Thank you very much...
I hope that you will enjoy making yours as much as I did...
Take care my friend...All the best.....Andy
Keep up the good work. Many thanks👍
Hi Stuart...
Thank you, I will try..👍.
My pleasure...
Take care my friend and all the best from Andy
Glad you showed how to make the jig! Enjoy your “damp” Cornwall. We have had only one day with rain since early June. They officially declared us in drought status. Not complaining. It has been one of the nicest summers so far with mild, pleasant temperatures. You are winning the rain challenge!
Hi Valerie...
Haha.. yes.. it is a bit damp here again...
I'm glad that you have enjoyed your mild, pleasant summer even if you have a drought...
Our "summer" was short and unbearable...
We have been on a hosepipe ban for 18 months now... goodness knows why...
I'm not sure that I should be too smug about winning the rain challenge ...
Although I do prefer rain to high temperatures...good job really...
Take care my friend...All the best.....Andy
Hi Andy
Great video as usual and thanks for the detailed instructions on the off-centre jig
All the very best
John.s
Manchester
Hi John...
Thank you so much for your kind words...
I hope that you found it useful...
Take care my friend...All the best.....Andy
Hi Andy I think I might try to make a pendant, that was a great tutorial thanks, peter
Hi Peter...
I'm glad that you enjoyed the video..
I'm always pleased when someone goes on to make their own...
I hope that you will enjoy making yours...
Take care my friend...All the best.....Andy
Nice looking pendant Any and a great explanation on making the jig. I am all about making jigs and saving money. And it really is not about saving money I just like making special jigs.
Great video my friend!
Take care,
Gary
Hi Gary...
Thank you very much...
I'm relieved that it all made sense in the end...
Haha... yes .. I know that you love your jigs...
Take care my friend...All the best.....Andy
Great job Andy. I was using a commercial jig a couple of weeks ago that very much the same thing. Advantage of yours is the cost is practically zero. Thanks for sharing.
Hi Doug...
Thank you very much...
Yes.. the commercial ones are a bit pricey...
I like mine better...
Take care my friend...All the best.....Andy
That’s a great jig Andy! It just goes to show that a valuable jig doesn’t need to be expensive or store bought. Nice pendant too!😊. Please send rain my way - we are about 7 inches short for the year.
Hi Todd...
Thank you...
Yes... simple to make and costs nothing... ideal...
I'm glad that you liked the pendant...
Rain all day today so I will try to send it over to Texas for you...
Take care my friend...All the best.....Andy
Nice one Andy, I've been ging to make one of these about 3 years now, perhaps this is the kick up the rump I've been needing.
Hi Ron...
Thank you very much...
I'm happy to be the one to give you the incentive to make one...
Enjoy making and using yours...
Now I need someone to get me to do all those jobs that I've been meaning to do... Haha...
Take care my friend...All the best.....Andy
Now
Nice job Andy .
John from Scotland
Hi John...
Thank you so much...
Take care my friend...All the best.....Andy
Awesome work Andy
Hi Lyndon...
Thank you very much...
Take care my friend...All the best.....Andy
Not Ed…but really thankful that you showed how to make the jig…😃
Thanks Andy.😊
Hi Jack...
My pleasure 😊
Take care my friend...All the best.....Andy
Handy jig, Andy! Makes the job easy and fun! Good job on the explanations in this video, even I could understand them! 😊
Phil
Hi Phil...
I'm glad that you could understand it...
I added bits and cut bits out during editing and had to keep checking that any of it made sense... Haha..
Take care my friend...All the best.....Andy
Thanks for sharing!
Hi Joan...
My pleasure...
Take care my friend...All the best.....Andy
Andy, that’s a great little jig. Thanks for the tutorial.
Hi Arbourturning....
I'm pleased that you liked it...
My pleasure...
Take care my friend...All the best.....Andy
Nice work Andy, you know how I like a little multi-axis turning, very satisfying project and a beautiful pendant!
Cheers mate, take care!
Hi Pog...
Thank you so much for your kind words as always...
Glad that you liked it...
Take care my friend...All the best.....Andy
Great little project Andy, great to have the narrative and you sharing your knowledge and experience.
Hi Mckmake...
Thank you so much for your kind words ...
I'm glad that you have found it useful...
Take care my friend...All the best.....Andy
Gorgeous pendant Andy and a great explanation of how to make the jig.
Take care my friend.
Cheers, Huw
Hi Huw...
I'm glad that you liked it and I'm glad that the explanation made sense...
Take care my friend...All the best.....Andy
Hello Andy the pendents are really lovely and I like how they shine. The Jig you made is good it was interesting to watch. Andy this video was excellent like all the others you put out, take care of yourself. Amanda xx
Hi Amanda...
I'm so glad that you liked the pendants and found the jig interesting to watch...
Thank you as always for your very kind words...
Take care my friend...All the best.....Andy xx
Nice work Andy! I really like the pendant. That would probably sale great at craft shows. Take care and GOD BLESS 🙏!
Hi Stephen...
Thank you.. I'm glad that you liked it...
Haha.. yes.. this one actually fits the title 😲...
God bless you and yours...
Take care my friend...All the best.....Andy
Great video, Coincidentally I have been making pendants today and will be making your jig as an improvement on mine. Sorry to hear of your rain as it’s 30plus cent daily hear in the south of France 🌞🌞🌞
Hi Geoff...
Thank you very much...
I hope that my jig design will help you with your pendant production line...
Between you and me... I'd rather have the rain...😊☔🌨
Take care my friend...All the best.....Andy
Well done! I haven’t watched you for awhile but I binge watched you last night and today! This one in particular is so well done, making pendant making a breeze! Thanks for sharing your wisdom here. Greetings from the US.
Hi Scott...
Thank you so much...
Haha.. binge watching my videos... who would have thought it...
Great to hear that you are enjoying my eclectic mix of videos though...
And that you have found this one useful ...
Take care my friend...All the best.....Andy
Very cool
Hi Madonna ...
Thank you so much...
Take care my friend...All the best.....Andy
Great video and instructions. Thank you much appreciated, my friend!
Hi August...
Thank you so much.. I'm glad that you liked it...
My pleasure...
Take care my friend...All the best.....Andy
Very nice, Andy. I like the jig, it’s nice to make you own tools and saves money, too. Nicely done👍🏻
Hi Mike...
Thank you very much...
I totally agree with you about making your own tools and saving money...
Take care my friend...All the best.....Andy
Nicely done Andy! 😃
Hi Val...
Thank you very much 😉
Take care my friend...All the best.....Andy
Beautiful pendant, Andy. Cool jig, too. 😊
Hi Rob...
Thank you so much 😉...
Take care my friend...All the best.....Andy
You could glue a stone or jewel over the hole from the tail stock.
Hi John...
Yes.. good idea.. that would look lovely...
Take care my friend...All the best.....Andy
Put a small nut over the sharp point of the tail center to keep it from marking the wood. Just don't forget the nut is there when you pull the tailstock back, or your nut will be gone.
Nice pendant Andy. I've made a couple of dozen pendants on my Proxxon mini-lathe, mostly hybrid resin/burl blanks from Emma Cook (Tiny Turner). After sawing off the corners, I mount mine on a block smaller than the pendant so that I can shape the edge in one operation, using masking tape and superglue. I turn at just over 1000rpm and have never had a flier yet. There is also almost no glue residue to clean up afterwards. I really must get around to filming my method one of these days 😁
1st BOOM😂😂😂😂
Haha... well done you
@@AndysCornishCreations 😁😁
Well done Andy another great creation 😊👍
thanks for that I thought it was done with mirrors
Hi Superbazzman...
My pleasure...Haha...
Take care my friend...All the best.....Andy
Super lovely box. Wonder where you find the cercle open box.?
Hi User....
Thank you so much...
Circle open box.. ?..
I wonder if you are referring to the small hinged box on my latest video...
If so ... it was from Procraft.. here in UK...
If you live elsewhere... try ..." woodturners round box hinge kit "..
I hope that this helps...
Take care my friend...All the best.....Andy
Hi Andy - good to see you, hope you are well! I really enjoyed watching this thanks for showing us about the jig especially. What was the double sided sticky paper that you used?
Hi Paul...
Good thank you...
I hope that you and yours are all well...
I'm glad that you have enjoyed this one...the jig is really useful...
The tape is ... Mammoth heavy duty 50mm double sided tape... Amazon...
Take care my friend...All the best.....Andy
@@AndysCornishCreations thanks mate - stay safe - all the best!
Double sided tape is a pain!
How do you ensure that none of the CA glue dries on the the wormhole screw? Do you need to clean it with any kind of solvent? Or does it just not affect the screw if some of it dries onto it?
Hi Wendy...
The CA soaks into the wood and as long as you screw it down and immediately unscrew it, then it won't stick to the woodworm screw...
Take care my friend and all the best from Andy
that's excellent. Thank you. And great video! I was especially excited about learning how to make the jig. And the pendant is beautiful. 2 granddaughter birthdays coming up in the next few weeks. Thanks again!
@@AndysCornishCreations
I'm sure that your Grandchildren will love them...
You could send me a picture when you have made them...
Take care my friend and all the best from Andy
'Promo SM'
Hi Augustin...
Thank you...
Take care my friend...All the best.....Andy