I am involving a research project in which I should simulate a three-point bending test for ceramics for example Al2O3. As you know, ceramics don’t have a plasticity stage and after pass through the elastic region, they ruptured. I was wondering if you’d mind letting me know which parameters as a coefficient are important in my simulation to define them...tensile strength, elasticity modulus, compressive strength
I am wondering , using Analytical Rigid Surface will simplify the meshing even for rigid bodies as well. why to mesh the rigid bodies here. I can still use the Analytical rigid surface the arc of 180 degrees
tried many tutorial and was the only one that worked! Big help. Thx
I am involving a research project in which I should simulate a three-point bending test for ceramics for example Al2O3.
As you know, ceramics don’t have a plasticity stage and after pass through the elastic region, they ruptured. I was wondering if you’d mind letting me know which parameters as a coefficient are important in my simulation to define them...tensile strength, elasticity modulus, compressive strength
I am wondering , using Analytical Rigid Surface will simplify the meshing even for rigid bodies as well. why to mesh the rigid bodies here. I can still use the Analytical rigid surface the arc of 180 degrees
can you please share this file your final result. I want to compare with my results. I'm not getting the results
nice