@@GacMan47 I used to say that too, until I tried it myself. It's not as difficult as it seems. If you don't try it yourself, you'll never know. You can do it.💪
@@far_jklike what? crappy motion controls and low quality haptic feedback? wow so amazing definitely worth hours of soldering and worth bricking a 350$ device. like ok if you like messing around with the switch good for you but there isnt really a logical reason to buy it over a more powerful handheld besides being a nice collectors item
My 4gb modules are on the way. Can't wait to install them and see the performance :). Thanks for the vid. Maybe I would've liked it to be a bit slower though and not speed up.
With a 50+ hours incredibly difficult process that has a 99% chance to destroy your console if you aren't one of the 1000 people able to do something like that, there's no way Nintendo considers that a threat
tu est tout simplement incroyable moi qui ne voulais initialement pas de switch tu m'ouvre le champs des possibilité de maniere tellement grande que maintenant je veut une switch
@RevolutionFalls Wait, how would OP be wrong though? It makes sense on what they say it does indeed have very very clear microscopic video. Micro is small, it doesn't mean at an Atomic level
I have no knowledge about these, I have no idea how you have done it, but maaaaan! I watched the whole video and I swear I could have gone at least twice! Beautiful job done! :D
WOW!!! justo es lo que busco que alguien haga este trabajo a mi nintendo pero dónde vivo no hay nadie que pueda o se anime hacer tremenda obra, mis respetos man
conozco a uno en mi ciudad es excelente con soldadura, el problema es que no maneja software tan bien, aquí el hombre además del hardware hizo comandos muy avanzados de linux y no creo que el de mi ciudad pueda hacer eso, estaría bueno si aliexpress ya vendiera una switch así, saludos...
Nice! Definitely not practical and more of a "I'm doing this because I can" kind of upgrade, but impressive stuff nonetheless! Definitely got me interested in learning more about overclocking the switch, learning about timings, Binnings, and each function in the Switchroot Linux DVFS Config to maximize the Switch's pitiful memory speeds with the stock ram chips. Great content, definitely subscribing to learn more from you in the future :)
Good work, with the cpu flex, you can chop the end of it and solder your cpu point to the bottom of the top resistor on the underside of the flex then just run the wire through the shield clip points
It's really impressive you can tweak both the hardware and softwarea and it's a valuable skill to have. Having a modded switch with ubuntu is overkill 😂
i messed up my switch oled HOS USER partition (i dont know how) but thanks to this video i was able to restore the original size! it was only using 12gb instead of the 60gb partition. thank you, i was pulling my hair out for days but somehow you indirectly helped me :).
Impresionante, pero muy complicado para la mayoría de usuarios, entre los que me incluyo, me quedo con me microsd de 512 GB y mis 4 megas de RAM...pero está muy bien la información. Personalmente no le veo mucha utilidad a Linux en la nintendo switch y android tampoco se lo voy a poner, pero me parece una pasada el trabajo de soldadura y el del software que hay que hacer, me suscribo al canal y seguiré viendo tus videos
Salut ! Je sais que tu es français mais je voulais te dire que je trouve le travail de la vidéo et de la switch incroyable et je voulais te féliciter ! 🔥
Hello, I bought a switch that had a dead emmc, I bought one but I think it comes without a system, could I remove the system from another OLED and inject it into the clean emmc? Don't you have a problem with serials or something like that?
I think games can run in a 8GB modded console if Atmosphere is well configured, but the extra RAM won't benefit 99% of games (although I've read a few Switch ports checks the available RAM and uses it to the max). The higher RAM FREQUENCY will benefit all games globally. Another usage for the extra RAM is homebrew (specially useful for running Linux/Android), game modding, debugging...
Waiting to see this machine in action. If worthy, I'll do the process to achieve those results. Thanks, man, you're awesome. And... which modules did you use? Both, for ram and nand
this is amazing work for me, i cannot understand the purpose unless someone has money to throw away. cost of switch plus chips plus having the work done has to be close to purchase price of a more powerful handheld with more ram and storage and bigger and better screen
actually yeah, i don't have any handhelds other than switches so I didn't have any real knowledge of what's available and prices. but i totally forgot about the steamdeck which is way less than building this in terms of just raw $
The switch can support it, but there aren't any 1TB/2TB eMMC 5.1 HS400 modules available. Most manufacturers have moved on to newer interfaces like UFS 3.0 and above
I wish I could do this mod. Absolutely hate it, that Nintendo didn't give the OLED model any performance upgrade at all... Nintendo should be embarrassed.
I will never be attempting this, and Idk why I just sat here watching it like I can even comprehend half the shit he just did, but still amazing video XD
But you won't get any noticeable improvement to match the effort plus cost of those upgraded components on original switch games as they aren't programmed to take advantage of such upgraded hardware.
this is cool af and i really want it but i'd never attempt to do it myself, im sure theres a goldmine of a market in this department that no one capitalized on yet
I swear this is just art at this point
Confirmo, se ha convertido en un artista.
better than art
Why
@@genlongtsang1093 did you watch the vid
How I wish I could wield this man's intelligence..
The possibilites, would've been endless.
God knew you would be too powerful if you had such power, brother.
it's not that hard brother, you just have to learn how to solder
I wish I had his soldering skills
@@GacMan47 I used to say that too, until I tried it myself. It's not as difficult as it seems. If you don't try it yourself, you'll never know. You can do it.💪
Unless you are low IQ (no offense if you are because it wouldn't be your fault) you can obtain it.
nintendo is either gonna hire this man or sent the yakuza after him
Lol I'm gonna download this video before Nintendo sees it
That yakuza bit lmao
Dont worry we have Anonymous to back him up all the way!
Would they be from the sheemano family?
@@misodgurung2718 those clowns are useless
A viewer cannot grasp how much skill that takes. I tried to put a modchip in my oled and I bricked it -_-. That just makes this more impressive lol
Thats why u need 5-50 or 100mm cam to checking solder
I'll honestly never do this mod, but this was a treat to watch. Very cool to see it happen.
SD upgrade ❌
Oled PRO MAX upgrade ✅
Ryujinx .
@@Red-Revolution708garbage
@@Red-Revolution708original hardware has gimmicks that cannot be replicated by the machine
@@far_jk Yeah like low framerate
@@far_jklike what? crappy motion controls and low quality haptic feedback? wow so amazing definitely worth hours of soldering and worth bricking a 350$ device. like ok if you like messing around with the switch good for you but there isnt really a logical reason to buy it over a more powerful handheld besides being a nice collectors item
Downloading this video to prevent nintendo take down
How does that prevent takedown?
@@emptytrashben2375 Archive/re-upload it
@@GAALsbrr and why would Nintendo bother to take this down? his completely changing his console not doing piracy.
@alfredmanner6881 it's nintendo we're talking about
I have no idea what 96% of what he's doing but I like it and watched it till the end.
That damn AI voice-over
That way Nintendo ninjas can't get him
He has to be safe from nintendo
And let’s be honest, for AI generated voice over, it’s not bad.
And truly, most of it is due to the writing, which is only cringey seeming because it’s not the TH-camrs first language.
Bro it's not an AI it's just a Twitch tts
If Nintendo can't give us a PRO... the community will build the PRO. Kudos man ❤️💪
My 4gb modules are on the way. Can't wait to install them and see the performance :). Thanks for the vid. Maybe I would've liked it to be a bit slower though and not speed up.
It was hard to find a good compromise without too much speed up and not being 1 hour long and boring 😄
Switch games will not use more ram unless programed too
@@topherc100 Some games can use it, but most don't without additional patch
In the end... Linux and Android will thank you very much
u cant slow it down on utube setting?
Damn maaaan, you are so cool 😊
By the way thanks for the O.C utility now i can achive 2000mhz+ on cpu and ram gpu is 1000mhz+ 👌
nintendo ninjas are speeding toward this mans house
Oh ya we alrdy seen teaser of Emio
Why?
With a 50+ hours incredibly difficult process that has a 99% chance to destroy your console if you aren't one of the 1000 people able to do something like that, there's no way Nintendo considers that a threat
tu est tout simplement incroyable moi qui ne voulais initialement pas de switch tu m'ouvre le champs des possibilité de maniere tellement grande que maintenant je veut une switch
You need to be GENIUS to do all this! You're practically a Nintendo engineer, crazy!!😮
This is awesome! Thanks for the tutorial, I am versed in hot air soldering myself and may attempt this once I have enough time on my hands ;)
Esto ya se puede considerar arte, y tú, eres todo un artista.
I watch a lot of tech repair channels, yours by far has the best microscope video quality😆
“Microphone” quality. (Edit: I misread microscope as microphone)
@@RevolutionFalls sounds like ai
@@McMasterProGenius exactly
@RevolutionFalls Wait, how would OP be wrong though? It makes sense on what they say it does indeed have very very clear microscopic video. Micro is small, it doesn't mean at an Atomic level
@@PixelatedWolf2077 I misread it as microphone
How anyone thinks to do this type of thing, then can actually pull it off is incredible
Just wow, dude! I have no words to describe how incredible this upgrade and your competency on the RT
Both the Switch and OG Xbox have massive RAM upgrades now. Nice
I have no knowledge about these, I have no idea how you have done it, but maaaaan! I watched the whole video and I swear I could have gone at least twice! Beautiful job done! :D
This is my next project. I want to do this. It looks AMAZING!
Like others say, this is ART!, dude, you are amazing!
WOW!!! justo es lo que busco que alguien haga este trabajo a mi nintendo pero dónde vivo no hay nadie que pueda o se anime hacer tremenda obra, mis respetos man
conozco a uno en mi ciudad es excelente con soldadura, el problema es que no maneja software tan bien, aquí el hombre además del hardware hizo comandos muy avanzados de linux y no creo que el de mi ciudad pueda hacer eso, estaría bueno si aliexpress ya vendiera una switch así, saludos...
Si hay en aliexpress o en venta quiero uno
Nice! Definitely not practical and more of a "I'm doing this because I can" kind of upgrade, but impressive stuff nonetheless!
Definitely got me interested in learning more about overclocking the switch, learning about timings, Binnings, and each function in the Switchroot Linux DVFS Config to maximize the Switch's pitiful memory speeds with the stock ram chips.
Great content, definitely subscribing to learn more from you in the future :)
You earned a new subscriber, your videos and efforts you put in can't be weighed in diamond!
Good work, with the cpu flex, you can chop the end of it and solder your cpu point to the bottom of the top resistor on the underside of the flex then just run the wire through the shield clip points
The skill and proficiency of this work is truly impressive, it certainly inspires one to expand his remit of interest
yes! Thanks for this video ❤
Sick, nice to see some proper upgrades and modifications for cooling even.
Eh bah c'est incroyable, je ne pensais pas qu'on puisse upgrade sa switch comme ça
On peut l'améliorer comme ça mais c'est pas officiel
It's really impressive you can tweak both the hardware and softwarea and it's a valuable skill to have. Having a modded switch with ubuntu is overkill 😂
Thanks to your video, I successfully made this mod on 3 different Nintendo Switch consoles.
i messed up my switch oled HOS USER partition (i dont know how) but thanks to this video i was able to restore the original size! it was only using 12gb instead of the 60gb partition. thank you, i was pulling my hair out for days but somehow you indirectly helped me :).
Thanks for sharing this. It is fun taking a stock console and upgrading what you can.
Impresionante, pero muy complicado para la mayoría de usuarios, entre los que me incluyo, me quedo con me microsd de 512 GB y mis 4 megas de RAM...pero está muy bien la información.
Personalmente no le veo mucha utilidad a Linux en la nintendo switch y android tampoco se lo voy a poner, pero me parece una pasada el trabajo de soldadura y el del software que hay que hacer, me suscribo al canal y seguiré viendo tus videos
M. Naga, je vous tire mon chapeau. C'est complètement zinzolinx.
can you try something simular on a new 3ds XL or new 2ds XL? not a massive ram upgrade but something around 1gb and not the stock 512mb
That'd be cool. Might help the 3DS not shit the bed whenever there's more than 2 Pokemon on screen
emulator is better
@@stoic_af_memesnot really
@@23.shkola.63-t7iPeople play how they can, but sometimes playing on the hardware is better.
@@AeliusAnonymous It would be cool to see what someone does with the NAND flash memory if a interposer could work.
Awesome video, please hint what thermal pads you are using, especially thickness of them. Thanks one more time!
I never dabble in hardmodding, always sticking to soft-mods cause it's way easier and simpler in comparison, but ngl this was real engaging to watch
wow best video ever!! great skills nice man keep it up
incredible work, looking forward for upcoming videos!
Salut ! Je sais que tu es français mais je voulais te dire que je trouve le travail de la vidéo et de la switch incroyable et je voulais te féliciter ! 🔥
The switch "BRO" 😎
just for curiosity, is the voice a recording or text-to-speech? it sounds really clean... great tutorial, btw!
text to speech my english is not great 😅
@@nag3030 oooh, it's okay, I get it 😃
It seems that the guy s french(based on his Windows language), so his accent would make his speech...not so clean.
Your Soldering skills-is phenomenal
pure art of crafting! we need some benchmarks to see if those 8gb of ram can affect its gaming performance
Très propre, bien joué 👌🏻
Yo man, you should sell this service, atleast the mldding and the nand upgrade, this is insane work
I understood about 5% of the words said in this video. Fascinating still.
Wow u are a genius 🤖
he nailed the sorthing in one try dam
wow this is crazy man, amazing work 🤯
Just changing the back cover of the OLED is enough for me :)
I'm from uk if I sent my switch in the mail to you how much would you charge for this upgrade service?
Might have to try this
Sacré travail de soudure.
Je peine à changer un usb C (je débute...)
I haven't even put a PC together and I'm here watching this 😂
This man is insane bro..
Hello, I bought a switch that had a dead emmc, I bought one but I think it comes without a system, could I remove the system from another OLED and inject it into the clean emmc? Don't you have a problem with serials or something like that?
You can restore with a donor nand backup, follow sthetix's guide
RESPECT ma FRIEND RESPECT.. you have TALENT
Do you know if any games work with 8gb ram yet?
I think games can run in a 8GB modded console if Atmosphere is well configured, but the extra RAM won't benefit 99% of games (although I've read a few Switch ports checks the available RAM and uses it to the max). The higher RAM FREQUENCY will benefit all games globally.
Another usage for the extra RAM is homebrew (specially useful for running Linux/Android), game modding, debugging...
this would greatly improve android performance on switch
Vraiment cool la vidéo , est-ce que tu mod pour le plaisir ou tu prend des clients ?
@@pierrebeauregard9022 les deux
Ce mec fait partie de nintendo , juste que il a pas eu sa prime de Noël.
Waiting to see this machine in action. If worthy, I'll do the process to achieve those results. Thanks, man, you're awesome.
And... which modules did you use? Both, for ram and nand
crazy insane mods this is so fire bro
Are you French or just the Switch? Salut! Merci pour le vidéo !
Mind blowing you are very talented good job
I don’t own a Switch and I´m not planning to mod anything, but I still watched the full video
12:29 Alr this part just scared me to hell cause I thought the screen got cracked before I realised it was a reflection of your hand 😭
this is amazing work
for me, i cannot understand the purpose unless someone has money to throw away. cost of switch plus chips plus having the work done has to be close to purchase price of a more powerful handheld with more ram and storage and bigger and better screen
or the steam deck which already comes with all factory settings 😂
actually yeah, i don't have any handhelds other than switches so I didn't have any real knowledge of what's available and prices. but i totally forgot about the steamdeck which is way less than building this in terms of just raw $
Es solo por placer de poder hacerlo, además de ver las capacidades a las que podría brindar esta consola recortada de Nintendo.
they're about $30 on aliexpress so if you already have a switch and a soldering setup its not that bad
@@caden3ds pretty sure he says the nand was 180, and he didn't even say how much the ram was......
Many classmates, colleagues and friends bought this small game console❤
Dude nice! I'd imagine this is hard but on a scale of one to ten how hard was this? (Keep up the great work!)
Bravo mr le français ❤🎉
🏆 Are there 1TB or 2TB modules, do the Switch board and systems support them?
The switch can support it, but there aren't any 1TB/2TB eMMC 5.1 HS400 modules available. Most manufacturers have moved on to newer interfaces like UFS 3.0 and above
@@nag3030 Thank you very much for clarifying, your channel is very good for the whole world, a hug from your follower in Brazil 🇧🇷
Hello je suis intéressé pour de l’upgrade de ram uniquement, c’est faisable ?
This is fucking mindblowing 🤯 i Love the modding Community ❤
Francais qui a du talent ici !
Beatiful hardware mod ❤
protect this person at all costs
Lil bro is building the Switch 2 Lite😂💀
Hey, great video but why does it sometimes sound like it just cuts out the audio? Is it a text to speech thing or did you have to remove some audio?
Osti t'es un géni. Si seulement j'avais ces competences...
I wish I could do this mod. Absolutely hate it, that Nintendo didn't give the OLED model any performance upgrade at all... Nintendo should be embarrassed.
bien joué ! tu viens de gagner un nouveau abonné 😁👍❤
The Nintendo ninjas are coming at you home at 21.7 mph
I will never be attempting this, and Idk why I just sat here watching it like I can even comprehend half the shit he just did, but still amazing video XD
This guy must've worked at nintendo 😮
Knowledge is indeed power.
But you won't get any noticeable improvement to match the effort plus cost of those upgraded components on original switch games as they aren't programmed to take advantage of such upgraded hardware.
My man, i'm gonna do the ram upgrade, but for overclocking it i'm waiting your specific video
My first switch ever (oled) arrived today I wanna do this sooo bad, but when he pulled up linux I got lost. Also, where did you get the ram modules?
u can setup Linux by using dual boot or virtualbox
Your content is very good, congratulations!
How the f**k did you even get to this point? How many hours have you spent in total on this project? I freaking love it
this is cool af and i really want it but i'd never attempt to do it myself, im sure theres a goldmine of a market in this department that no one capitalized on yet
Do you sell your upgrade services?
This is nothing short of insane.
I successfully did Like 8 picos.
I already reballed ps3 in the past
This will be my next Project.
Thank you ✓