Not a bad trial run for June's editing. I would just say it seemed a little drier than usual, needs a little more excitement/cohesiveness. Just watch the old content and study up on the vibes of the previous videos and you'll be golden! The bike is looking sick by the way. I bought a 93 FXR awhile back and it had that exact same v-twin air cleaner cover on it lmao
Welcome June! You could be the secret to getting this channel the subscriber numbers it well deserves. I'm excited to see how you shoot and frame video for the bad ass stuff that KO shares, that we all wish we were doing too. So far, you are nailing the audio! I love the B-roll music and how you sync it with the action. Already noticed an improvement, good going, June! (Gimme the Grom) 😁
Trans shaft bearing is smoked on mine too buddy. just sitting here while the summer ends till my guy can get to it. Can't wait to see this one done! Coming along great.
Nah, you’re only too old if you let your self get that kruesi is in great shape and goes to the gym every day early as shit before going to the shop, u seen that dude with his shirt off?? The guy is swole
I like the big bear mount but i run forwards and i can't use it. Im thinking about getting the spluth stabilizer set up. I have progressing 412's and legengend axeo cartridges in the front of my 10 street bob. Ot feels tight but that stabilizer might make it better
All is well healed up for the most part probably never be the same either one of them. Law Tigers took really good care of Dave he’s doing well. Bill is working at a dealership in California. He is also doing well.
Looking good man! Are the Elite levers only available as a short lever? Also do you guys put together a Geezer inverted front suspension kit for Harley m8 touring. Pls let me know I’m ready to make a purchase Thank you
If you call the shop and talk to Trent, he can get in detail with that. The levers come in long and short.www.kruesioriginals.com/products/ez-pull-clutch-lever-clutch-perch-lever-only?_pos=3&_sid=8cbac7b10&_ss=r
Hey ryan got a question for you guys. Im looking to do a big bore kit on my bike when i have the funds. Question is after the install how would i go about breaking it in? Is that something i can do myself and it be okay or would it be better and easier to have it done on a dyno? Also do you guys have any experience with revolution performance kit's as thats what i have?
Nothing to do with Jake or the bike, but Ryan...it just occured to me you look like David Harbour's long lost brother. 😲Hey Hollywood....find a script...cast these 2 in a movie. Lol Anyway...always great shit no matter who's behind the camera. Much respect brother.
I used to do construction and hated my glasses. Swotched to contacts and got dust in my eye, instincts had me rub my eye, but i cut my cornea. Went back to glasses, broke my glasses. Now i squint even more.
I worked at Monty’s Harley Davidson dealership in my early twenties when those 100th anniversary bikes came out,that thing is such a treasure,my ex,(vicious,evil,slam pig) father has that same exact bike,colors and everything,I’d love to buy that thing off him but I don’t think he would ever part with it,he’s a cool guy even though his daughter is a piece of shit, he’s a one percenter,but you’re doing that thing justice, I’d murder someone for a kruesi build, ya need some one offed? Just kidding,no,but seriously
Only the MoCo would make anniversary bikes and also have them be the first year of the pressed together bottom ends which started all the runnout issues. I think 02 was the last year of the exploding cam chests though so theres that. Its a shame the black and silver looks beautiful. And for anyone wondering, EVERY SINGLE bike made in 2003 is an anniversary edition. Good luck with it.
You took the hair down pretty low,what did you go to a new barber and he fucked it up so uhad to tell him JUST FUCKIN BUZ IT ALL OFF!!! I’ve had that happen,it’s a shame,I’m a hair guy too,if I die with nothing one thing I’ll always have is my hy
Got my OG K-Bar for the Dyna, looks bitchin narrow enough that i can still split lanes 🤌🏼 if yall gonna run the BD s2 lights ill be the 2nd one to grab it and install it on the K-Bar!!
Not a bad trial run for June's editing. I would just say it seemed a little drier than usual, needs a little more excitement/cohesiveness. Just watch the old content and study up on the vibes of the previous videos and you'll be golden! The bike is looking sick by the way. I bought a 93 FXR awhile back and it had that exact same v-twin air cleaner cover on it lmao
June’s first video and she killing it to this day let’s go june 👊🔥
Let’s address the elephant in the room! Who is June? And Is June hot? 😂
Nice du. I just buzzed my hair off too at the "end "of summer. I think my brain knows it's football season.
Definitely a bummer about Jake. His videos were good
Turning out BEAUTIFULLY
Thank you 🦅🦅🔥🔥
Good job June!
Welcome June! You could be the secret to getting this channel the subscriber numbers it well deserves. I'm excited to see how you shoot and frame video for the bad ass stuff that KO shares, that we all wish we were doing too. So far, you are nailing the audio! I love the B-roll music and how you sync it with the action. Already noticed an improvement, good going, June!
(Gimme the Grom) 😁
Catching the bad bearing (without its use, leading to the bad things that clue you in) is gold 🥇 like the switches💰
Great video. I love seeing twin cam’s getting some love.
They are the best
Super nice build. Tough luck with the transmission.
Thank you, it does suck but I’m glad I caught it when I did
Ey Jake Im from Milwaukee, Wisconsin. Come thru to the next bike night at the museum (thursdays) homie!
When Ryan gets up to leave:
Spectacles ✅
Tesistcles ✅
Wallet ✅
And watch ✅
Stuntstache FTW!!!
Sophisticated badass
“ In a FIST of RAGE”
😂😂😂😂😂😂😂
Trans shaft bearing is smoked on mine too buddy. just sitting here while the summer ends till my guy can get to it. Can't wait to see this one done! Coming along great.
Thank you, I’m definitely chomping at the bit to get mine done too
Ryan, saw the Street Glide in person yesterday at Lancaster Harley in PA, FUCK she badddd!!!! 🤙🏻🤙🏻🤙🏻
Good luck Jake. Ryan your bike is FUCKING GORGEOUS 🔥🔥🔥
Thank you 🦅🦅🔥🔥🔥
Ever the professional 👍…looking slick brother 🤘😎🤘
Thanks 👍
Just did new levers the other week had the same issue
Man I love those T bars
Thank you
I actually be laughing out loud at the shit Ryan says sometimes 😂😂😂 “I’m so mad I could solve a mystery”
😎😎😁
God damn I wish my bike was that clean. I also have a 03 FXDL, same color scheme too.
Beautiful bike, love the 100 year anniversaries. I have one but it isn't CHERRY like yours
They are my favorite, thank you
When you realize your getting too old to stunt ride and you buy a drift car. 😂 good luck in all you do man. Thanks for your content
Nah, you’re only too old if you let your self get that kruesi is in great shape and goes to the gym every day early as shit before going to the shop, u seen that dude with his shirt off?? The guy is swole
😂😂😂😂😂 ain’t the truth
That air cleaner had Kuryakyn written all over it 😊
I like the big bear mount but i run forwards and i can't use it. Im thinking about getting the spluth stabilizer set up. I have progressing 412's and legengend axeo cartridges in the front of my 10 street bob. Ot feels tight but that stabilizer might make it better
Get rid of those forward controls it will feel a whole lot better, I promise
That beeping is aggravating. Bike is really nice.
Hey how’s the 2 techs doing that got hit a few years back ?
All is well healed up for the most part probably never be the same either one of them. Law Tigers took really good care of Dave he’s doing well. Bill is working at a dealership in California. He is also doing well.
Nice video! Can a Sportster 883 or a 1200 be a good stunt bike? I always see more Dynas used for stunts.
Hi I’m kruesi originals, and on this episode of cops….. 😂.
Is that a new Anniversary tank badge? If so, where did you get it!?
*the badges on the side with the gold detail
It’s all OEM on the bike
"Riding thru this worrrld, with bifocals"
Loved the editing! Welcome to the shit show June
🙏🙏
When’s the kruesi originals front mount coming? Think I’ll need to replace my front mount this winter and would rather buy from you guys than big bear
Not sure if we’re gonna make that happen. As long as Big Bear keeps them in stock we’re not gonna make them.
@@kruesioriginals well damn was hoping you guys would. Guess I’ll have to break down and buy theirs or try to make one in my cnc class in college lol
Dope grom hope I win it. Been a member for a little while
Oh yes, I appreciate that. Thanks for joining.
Looking good man! Are the Elite levers only available as a short lever? Also do you guys put together a Geezer inverted front suspension kit for Harley m8 touring. Pls let me know I’m ready to make a purchase
Thank you
If you call the shop and talk to Trent, he can get in detail with that. The levers come in long and short.www.kruesioriginals.com/products/ez-pull-clutch-lever-clutch-perch-lever-only?_pos=3&_sid=8cbac7b10&_ss=r
Cool Thanks
@@kruesioriginals
How many miles were on that before the transmission blew and when do they normally start to have problems?
They normally don’t have problems , they are pretty tough. This one has 20 some thousand on it
Love your content & ya skills & not to forget your amazing products ❗💪🇺🇲💪
Keeping it Kruesi ❗🖤🧡🖤
Remember rule #1
Safe travels 🙏♥️🐾🐾🇦🇺
🖤🧡🖤🧡🖤🧡🖤🧡🖤
Thank you! Will do!
What mirrors are those I finally smoked my vintage square set and these are close
Pro-One
www.kruesioriginals.com/products/pro-one-perf-mfg-micro-mirror-w-v2-cut-out-stem?_pos=7&_sid=03acc32fa&_ss=r
the goat
Remind me of Michael Douglas in falling down
Do you only run the front big bear motor mount or the back as well?
If only the front is it better than the full sputhe kit?
Just front if you have both the bike becomes to rigid, just run oem rear and big bear front
We were on the front and the OEM rear. It’s the best set up.
Ryan ‘The Iceman Chuck Lidel’ Kruesi.
😂😂😂
Turned this video on and thought I clicked on porn hub when Ron Jeremy came on. 😅 Then my wife goes I’ve digging the stache. Great video as always!
😂😂 I’m thinking of starting a side career
Ryan Jeremy
Hey ryan got a question for you guys. Im looking to do a big bore kit on my bike when i have the funds. Question is after the install how would i go about breaking it in? Is that something i can do myself and it be okay or would it be better and easier to have it done on a dyno? Also do you guys have any experience with revolution performance kit's as thats what i have?
Man I’m still waiting on my chrome levers
Did you order them from us?
No I did it from elite moto and they are waiting on chrome and it might be July.
Do y’all have some chrome levers in stock?
Those t bars look like they should be on Jax teller’s bike,fuckin badass
Always Killin it! 🤘🏽⚡️ btw, kinda new at wrenching on the bike. What's that lube called the one you put into your clutch cable?
Looks to be Bike Aid Dri-Slide Lube
@Justinll23_ yo that's it! Thanks bro 🤘🏽⚡️
@@erikmorales7612 No problem bro🤙🏽
It’s dry slide, graphite, cable, lube
Nothing to do with Jake or the bike, but Ryan...it just occured to me you look like David Harbour's long lost brother.
😲Hey Hollywood....find a script...cast these 2 in a movie. Lol
Anyway...always great shit no matter who's behind the camera. Much respect brother.
Thank you very much, and I don’t know who that is
whatever happened to matt?
I used to do construction and hated my glasses. Swotched to contacts and got dust in my eye, instincts had me rub my eye, but i cut my cornea. Went back to glasses, broke my glasses. Now i squint even more.
It’s a long journey
God damnit I want this
Twin v twins
Bro nice high & tight hairdo!
I'm here for the long haul Kruesi but the new editing on this one hurt a bit, sorry June. Hoping the next ones a little more cohesive.
Lol "the editing hurt" what a homo
I worked at Monty’s Harley Davidson dealership in my early twenties when those 100th anniversary bikes came out,that thing is such a treasure,my ex,(vicious,evil,slam pig) father has that same exact bike,colors and everything,I’d love to buy that thing off him but I don’t think he would ever part with it,he’s a cool guy even though his daughter is a piece of shit, he’s a one percenter,but you’re doing that thing justice, I’d murder someone for a kruesi build, ya need some one offed? Just kidding,no,but seriously
Only the MoCo would make anniversary bikes and also have them be the first year of the pressed together bottom ends which started all the runnout issues. I think 02 was the last year of the exploding cam chests though so theres that. Its a shame the black and silver looks beautiful. And for anyone wondering, EVERY SINGLE bike made in 2003 is an anniversary edition. Good luck with it.
Censored
The bleeps are so annoying………..
You took the hair down pretty low,what did you go to a new barber and he fucked it up so uhad to tell him JUST FUCKIN BUZ IT ALL OFF!!! I’ve had that happen,it’s a shame,I’m a hair guy too,if I die with nothing one thing I’ll always have is my hy
Got my OG K-Bar for the Dyna, looks bitchin narrow enough that i can still split lanes 🤌🏼 if yall gonna run the BD s2 lights ill be the 2nd one to grab it and install it on the K-Bar!!
Glad you like it, thank you for the purchase