I have a wood burning tool very similar to the stencil burner. I also discovered a pack of clear plastic face shields that I purchased during the pandemic. I cut out an astronaut stencil for a painting I'm working on but I used a tiny pair of scissors instead of the burner tool. There were too many small cuts I had to make and the burner tool wouldn't have worked very well.
I use pellon to burn my stencils, it doesn't leave that burnt edge that it leaves on plastic. and like someone else mentioned in a comment, I use the stencil burner on top of glass.
@wleonartistry Love the video Bill.🤘😎🎨 I know this is a few years back, but you can get super tight lines and more use out of the tips( before they wear out) if you burn the stencils on glass. We have a couple of 12 by 12 inch tempered we use that came out of a used display case 👍
Omg I have been doing mine on thick paper and only last for a while, This are much more natural organic an awsome. I am buying all the materials right now Thank you
If you burn them on glass they come out much cleaner. as was mentioned below.. I almost never make my own stencils since one of my friends makes them with a laser these days. and through the years ive gathered hundreds of dollars worth of stencils... Ironically i usually only use a handful.
@@TheAIRspace thank you for your response How thick should the mylar be? Should I put the mylar on top of a glass? Thats what you are saying? What is the name of the tip of the heat pen.
Soldering irons .....just fine. Where you get the detail is in the tip. You want the smallest or sharpest tip you can find. You can even sharpen a soldering iron tip if you so chose
Hello, Bryan McGlothlin here. I'm pretty green with a lot of airbrushing technics. I've been around auto body old hotrod's I grew up admiring the masterpieces these artists are slinking out. I just can't get enough of. I'am also laying it down. I have a very good support backing me. Please idk if you possibly could refer me to someone or a shop where I can get the right corrective criticism. To my full potential. I've been told my entire life every dream ever had has been crushed by loved ones man with the motorsports background custom street rods that I built with my father before I was a teenager. Any is GREATLY APPRECIATED BRYAN MCGLOTHLIN Southwest, Custom Airbrushing $ Graphics
depends where in the southwest are you? There are a bunch of custom graphics guys in texas. and california also. reaching out to someone in your region would be the way to go. someone established a little.
Thanks Tim. I have two artool shields and geralds texture stencil.. Other than that anything I use is homemade. I just cannot see spending a fortune on some shapes : )
10 mil would be my first choice. I rarely cut my own anymore, i have a huge stock of commercial made ones. and still some of my handmade ones which last a really really long time.
It would, someone mentioned burning on glass would help as well, I may experiment in the future, but I honestly have all I need for life at this point 🙂
Suggestion for stencils too Bill & Guys on here. If you can afford to do it of course. I make my stencils out of card stock believe it or not using an Ortur Laser Master 2 which is under $200. You can find stencils very easily online to use to laser cut them clean. Your Welcome :) If you have any questions about it, fire away :)
certainly a laser cutter is a way to go. And probably something ill get into eventually. This is a pretty old video of mine , i do have several very nice laser stencils. and likely will buy more. But there are still a few of those old ones I made that hang around in my pile. No question laser stencils can hit a higher level of quality.
@@TheAIRspace I just find it easier from a practicing standpoint whereas if the cardstock is no longer usable, I can just cut another in a few minutes. Not only that but, its like a try before you buy thing. If I like or use it enough, I would be more inclined to buy the mylar ones.
I believe ive been using 6 mil If you hit my kit page kit.co/wleonartistry it has a link in stencil material. 10 mil is nicer and I did have some here. But you can also link off the 6 mil to their other products :)
you could, however there are much better options for lettring. Personally i have a small plotter to use for things like that. But i have hand cut paper stencils before. However lettering stencils are best done with a sticky material. This is a good technique for textured stencils and freehand shields which is where mylar excels. One off stencils are crisper and better on other materials.
Im in the process of being able to add them. When I made this video I was a very new channel. Long story short amazon kicked me for being to small. I just today reapplied for amazon affiliates.. and should be able to get and post links again. Bear in mind this is an older video.
yes about that.. Amazon kicked me from the affilliate program. They said i was not an established channel yet. So all the amazon links are now dead or gone. I apologize. I am able to reapply there soon. However the mylar is easy to find. And the stencil burner as well. In another month or two I will be able to reapply and have their links again.
Also Rodney if you are in the states and one is local, hobby lobby sells stencil blanks, and a stencil cutter. The stencil blanks they have are simply mylar as well. Thanks for stopping by!
Bob Ross of Stencils 👌🏽
I have a wood burning tool very similar to the stencil burner. I also discovered a pack of clear plastic face shields that I purchased during the pandemic. I cut out an astronaut stencil for a painting I'm working on but I used a tiny pair of scissors instead of the burner tool. There were too many small cuts I had to make and the burner tool wouldn't have worked very well.
I use pellon to burn my stencils, it doesn't leave that burnt edge that it leaves on plastic. and like someone else mentioned in a comment, I use the stencil burner on top of glass.
Pellon? What's that?
@wleonartistry Love the video Bill.🤘😎🎨 I know this is a few years back, but you can get super tight lines and more use out of the tips( before they wear out) if you burn the stencils on glass. We have a couple of 12 by 12 inch tempered we use that came out of a used display case 👍
this is the video i have been searching for, thanks for sharing
Glad I could help
Thank you so much for this because I am new to airbrushing and like you say don't have any money so any pointers definitely help
Glad it was helpful!
Omg I have been doing mine on thick paper and only last for a while,
This are much more natural organic an awsome.
I am buying all the materials right now
Thank you
If you burn them on glass they come out much cleaner. as was mentioned below.. I almost never make my own stencils since one of my friends makes them with a laser these days. and through the years ive gathered hundreds of dollars worth of stencils... Ironically i usually only use a handful.
@@TheAIRspace thank you for your response
How thick should the mylar be?
Should I put the mylar on top of a glass? Thats what you are saying?
What is the name of the tip of the heat pen.
Thanks for this. I'm new to airbrushing, and this is just what I needed
Hey glad to hear! Its one of my earliest videos.. i may have gotten better at tutorials since : )
Love all your videos, they are just so helpful and amazing
Thanks!
gotta love your accent!
Cheers from Austria
yes the souther USA standard issue! Cheers!
Soldering irons .....just fine. Where you get the detail is in the tip. You want the smallest or sharpest tip you can find. You can even sharpen a soldering iron tip if you so chose
Great instruction & info! tyfs honey!
You are so welcome
Hello, Bryan McGlothlin here.
I'm pretty green with a lot of airbrushing technics. I've been around auto body old hotrod's I grew up admiring the masterpieces these artists are slinking out. I just can't get enough of. I'am also laying it down. I have a very good support backing me. Please idk if you possibly could refer me to someone or a shop where I can get the right corrective criticism. To my full potential. I've been told my entire life every dream ever had has been crushed by loved ones man with the motorsports background custom street rods that I built with my father before I was a teenager. Any is GREATLY APPRECIATED
BRYAN MCGLOTHLIN
Southwest, Custom Airbrushing $ Graphics
depends where in the southwest are you? There are a bunch of custom graphics guys in texas. and california also. reaching out to someone in your region would be the way to go. someone established a little.
Great video Bill, very informative!!!
Thanks Tim. I have two artool shields and geralds texture stencil.. Other than that anything I use is homemade. I just cannot see spending a fortune on some shapes : )
can a small solderring gun work.
yes its basically the same thing just different tips.
Thank you. WHich thickness mylar do you prefer?
10 mil would be my first choice. I rarely cut my own anymore, i have a huge stock of commercial made ones. and still some of my handmade ones which last a really really long time.
Would it help to sharpen the tip to a finer point? If the tip had a thinner & finer point there wouldn't be so much wake from the burning if any!
It would, someone mentioned burning on glass would help as well, I may experiment in the future, but I honestly have all I need for life at this point 🙂
I have a 3d FDM printer, so I print stencils from black and white images, if you have access to a printer that is a really cheap option
Thanks dawg
Any time
Suggestion for stencils too Bill & Guys on here. If you can afford to do it of course. I make my stencils out of card stock believe it or not using an Ortur Laser Master 2 which is under $200. You can find stencils very easily online to use to laser cut them clean. Your Welcome :)
If you have any questions about it, fire away :)
certainly a laser cutter is a way to go. And probably something ill get into eventually.
This is a pretty old video of mine , i do have several very nice laser stencils. and likely will buy more. But there are still a few of those old ones I made that hang around in my pile. No question laser stencils can hit a higher level of quality.
@@TheAIRspace I just find it easier from a practicing standpoint whereas if the cardstock is no longer usable, I can just cut another in a few minutes. Not only that but, its like a try before you buy thing. If I like or use it enough, I would be more inclined to buy the mylar ones.
Hey Bill great video....what mil mylar do you find the best thanks again
I believe ive been using 6 mil If you hit my kit page
kit.co/wleonartistry it has a link in stencil material.
10 mil is nicer and I did have some here. But you can also link off the 6 mil to their other products :)
Probably gonna seem like a weird question, but can you use the stencil cutter on paper? Or would it just cause a fire?
Nope but a good swivel blade or exacto knife can go right through paper. Aside from texture stencils and freehand shields I rarely use any stencils
wleonartistry thanks for the fast reply! That was really helpful!
Bill,
What was the thikness of the mylar you were using to burn you stencils. Is it like 6 mil?
Thanks
Ken
i think it is 7 mil.. but it has been a long while.
Stencils burn easier if you cut on a piece of glass
What is the thickness of the Mylar?
I believe 7mil 10 is nicer. I believe there are links in the description. This is a fairly old video, from memory I believe that is what was used.
@@TheAIRspace okay good, I just ordered 10mm. Thanks 🙏
Check out my kit and shopping guides HERE! kit.co/Wleonartistry
Serious in the nicotine business.
Can you do text, letters?
you could, however there are much better options for lettring. Personally i have a small plotter to use for things like that. But i have hand cut paper stencils before. However lettering stencils are best done with a sticky material. This is a good technique for textured stencils and freehand shields which is where mylar excels. One off stencils are crisper and better on other materials.
where's the links?
Im in the process of being able to add them. When I made this video I was a very new channel. Long story short amazon kicked me for being to small. I just today reapplied for amazon affiliates.. and should be able to get and post links again. Bear in mind this is an older video.
There is no links???
yes about that.. Amazon kicked me from the affilliate program. They said i was not an established channel yet. So all the amazon links are now dead or gone. I apologize. I am able to reapply there soon. However the mylar is easy to find. And the stencil burner as well. In another month or two I will be able to reapply and have their links again.
Also Rodney if you are in the states and one is local, hobby lobby sells stencil blanks, and a stencil cutter. The stencil blanks they have are simply mylar as well. Thanks for stopping by!
Merci !