Thank you sir for this. I had just received my Fallen Flyte from the pach store and wasn't sure how to update/change fonts and colours. Nice and simple clear instructions. Great video.
@@GrayPaladin My only "complaint" about the Fallen Flyte is that it doesn't "seem" to be as bright as the other Flytes I've seen on your channel and the USB-C port is recessed so you can't use any cable other than the one that came with the saber.
@@MackieStingray2040 I never judge brightness based on a video or camera. They don't accurately showcase what the naked eye sees. The same LED and parts are used from saber to saber so there won't be major variances in performance. That is disappointing about the cable though.
@@GrayPaladin Do you know of any resources that explains the text files in the "simpleLED" folder for each sound bank? One thing I really want to do on my Fallen Flyte is to change the default volume level. (too loud)
@@MackieStingray2040 Good question. I haven't looked at those files since I first got the saber. I'll take a look and try to update you. If I haven't gotten back to you in 2 days, comment again.
I finally got around to changing some fonts last night. Plugged the saber in and no device connected sound or light from the switch with a few presses. After unplugging it nothing worked at all and I couldn’t even boot the saber. Got scared that I fried the board. Popped the battery out to try and reset which worked. Plugged it back into the computer and worked fine. Changed a few fonts and disconnected safely. Everything works perfectly. Not sure why it didn’t work the first time but oh well. Thanks again for the video!
@@GrayPaladin are there any other sabers you would recommend I compare the flyte against? I want to stick with the in hilt led and was really impressed with the wide customization of the sound fonts.
@@GrayPaladin I appreciate your confirmation on that Paladin. I can see there is a lot more competition around up at the $500 tier with neo pixel blades with various sellers, and I will buy sabers like that at a later date. But I have a young son and want something more durrable. This flyte system seems like a great middle ground. Only thing it seems to be lacking is getting more hilt options available, but I really want a quigon saber, so they are all set for me anyway 😄
Also I’m so terribly sorry if this is frowned upon by you but if you could give my channel a plug that would be cool but if not no harm done and keep up the good work.
@@pitviper5672 You only have 5 videos, none that are Star Wars related. There's nothing for me to plug 🤷🏾♂️. It takes time, but you'll get there if you keep at it. Focus on content and subs will come.
Great video and very informative! I'm looking at getting a flyte saber from the pach store. Quick question- can you take out the sd card or do you always have to connect the lightsaber to computer using the cable? Thanks
@@GrayPaladin Yes they seem great for the price. This will be my first flyte saber. I received the notification this morning from TPS saying that they had replenished stock on a lot of sabers. I seen the Master Q and had to go for it. My favorite Jedi from the prequel era. Couldn't pass that up. It should be much better than my consular from US. Lol
Only the 6 sound banks from what I could tell. It's a lite soundboard so there a few limitations. That's a good idea about the colors. Yes I will do that.
Nice video brother! Now only if my speaker wasn't blown out... planning to add a few soundfonts into mine once Pach Store fixes this issue, and this helps a lot!
@LinearLearnerLO fair enough, sorry to hear you were unlucky to get one of those. I’m glad mine weren’t in that category, it would have been costly to send back and forth from UK
Thank you for making this! All of your videos helped me choose the flyte. If I want to purchase fonts on saberfont should I only get CFX fonts? I ordered my flyte not expecting it until March but I was shocked it was delivered in less than 2 weeks!
Do you know if the board will still work if you delete some sound bank folders or color profiles? I just got a Shadowblade V2 with Flyte installed and I don't really need more than 2 sound banks and one color profile.
@@GrayPaladin it is! i can't put down my flyte, i just keep changing the sound fonts. i just put in mario and nyan cat. lol. really fun. next would be getting a neopixel with asteria 2.5 to get that awesome blade effect
@@vanguard2595 Awesome, I'm glad you finally got your saber! I knew you would like it. Here's the emperor font www.kyberphonicfonts.com/product/emperor
Great video and will be most helpful when mine arrives in 2 days, do you by any chance have a link to where you got the sideous font and the krell font from please.
@@GrayPaladin Yeah especially as I have been told I "have a face for radio and a voice for television"! As you might be able to tell I don't like the sound of my own voice.
Once I get a saber this is going to help so much. I saw in your Bors Dragon Slayer review you didn't like the swing. Would this also be how you'd adjust the swing on your Bors hilt? Great tutorial and thanks for your time!
The Bors was different at the time. It used an Asteria 2.0 soundboard. I have sold that saber mainly because it didn’t have the hybrid swing. Since then Asteria has updated their board so now it has accent swings. Making font changes is the same in that you just have to use the SD card.
great review but is there any way where you can change the ignition effect i really love the senate majority and i have it installed and used a cfx from a commenter from that reddit page and i did save and backed up but nothing is happening its the same one as the normal bank3 is there anyway you can change the ignition to match the one from the video
Great tutorial! Is it possible to do a Color Matrix tutorial for the blade and FOC colors? I already have a chart for the colors, but the way they set them up is a bit confusing. Thank you in advance if you could do this for us. :)
@@GrayPaladin A general explanation would be good, mainly what primary/secondary color are. Tried a bluish flash color and it flashes red, while the blade has the correct color (primary/secondary set to white for darksaber)
@@GrayPaladin Hi, any general explanation regarding the colours would be great, this is my first saber and I'm a little stuck on achieving the colours I want
@@MonCallumari If you want custom colors you'll have to enter the RGB number values in the config file. This could be frustrating as the values vary on the spectrum and may not directly reflect on the saber without tweaking. I personally find the preloaded colors to be sufficient on the Flyte.
What if the cfx file has less files in the folders than the original sounfont folder example it has clash 1-16 on main file but cfx file only has clash1-8?
It's okay. You will just have 8 clash instead of 16. That varies from font to font and are non-essential to operation as long as you have at least one.
@@GrayPaladin thank you, also is there a way to change blade effects on this particularly board as well ? I added a pikachu font to bank 1 and I would like the blade to be a flickered effect rather than it be a stable effect.
@@GrayPaladinThat's a bummer LOL. Well at least I have the files to do so on a neopixl Saber when I get one I guess. Thank you again for your help. Love the videos.
@@GrayPaladin if you can go to their site and look and come back and explain to me what that option is that would be great because i tried talking to them and the have ignored me so far
Please help gray paladin just got mine very excited tried switching sounds but every time I plug into computer it says can’t recognize and it leaves the sabers board on and I have to take out the battery for help
@@GrayPaladin I have not even gotten to that step yet because it doesn’t even connect to my computer but it worked after a few tries idk what caused te problem
The video explains everything. KSith is no different from any font really. It's mostly drag n' drop. Some files may need to be renamed. What problem are you having?
@@GrayPaladin yeah it seems I had a similar problem to the guy further down in the comments. Popped the battery out, waited a few and popped it back in. Works fine and was able to edit fonts no problem.
That's not possible with any saber. You have turn off the blade, change fonts then power on again. The latest Verso soundboard update let's you switch between fonts while on, but it's when adjusting settings.
First make sure you're using a data cable and not just a charging cable. The one that comes with saber should work. Did you press the a/v switch once after you plugged it in?
@@GrayPaladin I used the one that came with the saber, and I pressed it yes. I could not remove it safely thou, as my pc did not register a device to remove.
@@GrayPaladin when I plug it into my pc now and press, it does register the blade, but says windows can recognise the device.. and it still won’t turn on
@@PepeKahnmann Hmm, I'm not sure at this point. Make sure it's fully charged and let it power off. Then boot it again and plug in. Maybe even try a different cable. If you haven't made any edits to the saber yet I'm not sure why it's not being recognized.
@@GrayPaladin happy news - I left it alone for a while (you know, to show who’s boos), then took out the battery for about 20 sec. and now it works again !!!
@@GrayPaladin I only plugged the USB in and taped the button I waited 1min nothing happened I unplugged the Saber to see if it was not dead it wasn't so I puged it back in than it .turned on by its self than I un plauged it i tried to turn it on nothing happened I opened it up the little green light was on and than I charged it nothing happened and I got it yesterday can I send it back?
@@iceyenmey424 You can try and send it back, but I would contact them first and see if they can troubleshoot. One thing to remember, do not just unplug from your computer. You should click eject from the computer menu then when it says it's safe to remove you can unplug.
Hey man! Love your content! Is it possible to add "preon" files, like the ones from Greyscale Fonts, so you might have the effect from powering up on the Flyte?
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค1]](http://i.ytimg.com/vi/bzivN4KDg-k/mqdefault.jpg)
Thank you for making this, you explained it better than I could!
Thank you! Outstanding saber!
Whenever I change colors in the color matrix, the colors aren't available on the saber even after being saved. Any idea why?
Thank you sir for this. I had just received my Fallen Flyte from the pach store and wasn't sure how to update/change fonts and colours. Nice and simple clear instructions. Great video.
Cool, I'm glad it was helpful. My Fallen Flyte shipped, but I'm still waiting for it to arrive.
@@GrayPaladin My only "complaint" about the Fallen Flyte is that it doesn't "seem" to be as bright as the other Flytes I've seen on your channel and the USB-C port is recessed so you can't use any cable other than the one that came with the saber.
@@MackieStingray2040 I never judge brightness based on a video or camera. They don't accurately showcase what the naked eye sees. The same LED and parts are used from saber to saber so there won't be major variances in performance.
That is disappointing about the cable though.
@@GrayPaladin Do you know of any resources that explains the text files in the "simpleLED" folder for each sound bank? One thing I really want to do on my Fallen Flyte is to change the default volume level. (too loud)
@@MackieStingray2040 Good question. I haven't looked at those files since I first got the saber. I'll take a look and try to update you. If I haven't gotten back to you in 2 days, comment again.
My saber had nothing listed about how to actually add these and my first attempt resulted in my thinking I damaged it. Thanks for the Tutorial
I finally got around to changing some fonts last night. Plugged the saber in and no device connected sound or light from the switch with a few presses. After unplugging it nothing worked at all and I couldn’t even boot the saber. Got scared that I fried the board. Popped the battery out to try and reset which worked. Plugged it back into the computer and worked fine. Changed a few fonts and disconnected safely. Everything works perfectly. Not sure why it didn’t work the first time but oh well. Thanks again for the video!
Not sure why it didn't work the first time either. Good thing it corrected itself. Good job troubleshooting.
I'm considering picking up a flyte saber, and you just taught me more about sound fonts than I could have hoped. Thank you so much Paladin.
You're welcome
@@GrayPaladin are there any other sabers you would recommend I compare the flyte against? I want to stick with the in hilt led and was really impressed with the wide customization of the sound fonts.
@@gawaynlothian2572 Flyte is in a league of it's own. Nothing else at the same price point offers customization like Flyte sabers do.
@@GrayPaladin I appreciate your confirmation on that Paladin. I can see there is a lot more competition around up at the $500 tier with neo pixel blades with various sellers, and I will buy sabers like that at a later date. But I have a young son and want something more durrable. This flyte system seems like a great middle ground. Only thing it seems to be lacking is getting more hilt options available, but I really want a quigon saber, so they are all set for me anyway 😄
Hey man just wanted to say thanks for the tutorial, I found it very helpful
I'm glad.
Outstanding Content, Super Helpful.....Thank you!!
Thank you and I'm glad it helped!
I’m getting the fallen flyte so this is going to help so so much
th-cam.com/video/96sSM-e5K7Y/w-d-xo.html
My review will be up tomorrow.
@@GrayPaladin no way on the fallen flyte
Also I’m so terribly sorry if this is frowned upon by you but if you could give my channel a plug that would be cool but if not no harm done and keep up the good work.
@@pitviper5672 You only have 5 videos, none that are Star Wars related. There's nothing for me to plug 🤷🏾♂️. It takes time, but you'll get there if you keep at it. Focus on content and subs will come.
Can you make a tutorial about how simple leds work ?
Great video and very informative! I'm looking at getting a flyte saber from the pach store.
Quick question- can you take out the sd card or do you always have to connect the lightsaber to computer using the cable? Thanks
Thanks! There is no sd card. You always have to connect using the cable.
@@GrayPaladin ok cool. Thanks for the answer. I just ordered the Master Q flyte. Hoping to add my Qui Gon font to it.
@@hannsolo51 I want to order that too, but won't be able to this time. Bummer bec I like all the Flyte sabers.
@@GrayPaladin Yes they seem great for the price. This will be my first flyte saber. I received the notification this morning from TPS saying that they had replenished stock on a lot of sabers. I seen the Master Q and had to go for it. My favorite Jedi from the prequel era. Couldn't pass that up. It should be much better than my consular from US. Lol
BRO YOU ARE THE MOST CLUTCH
Haha thanks man
Hey Gray Paladin, what fonts are on the cfx pack? 2:14
Does it have the same ones that for example come with Sabertrio's neopixel sabers?
Yes, exactly the same pack Sabertrio uses. They also add KSith Dark, Light, Balance, Vengeance, Krossguard, Sabertrio Light and Dark Edition.
@@GrayPaladin Thank you!
Is it possible to add more sound banks? Also could you do a tutorial on changing the saber colors?
Only the 6 sound banks from what I could tell. It's a lite soundboard so there a few limitations.
That's a good idea about the colors. Yes I will do that.
Nice video brother! Now only if my speaker wasn't blown out... planning to add a few soundfonts into mine once Pach Store fixes this issue, and this helps a lot!
Thanks brother! Pachstore is willing to work with you to repair?
@LinearLearnerLO The first is to find their contact info on their website and then use whatever form they have or email them.
@LinearLearnerLO Check if it's fully charged, I thought mine was blown out but it was just low on battery when making the crackling noises.
@LinearLearnerLO fair enough, sorry to hear you were unlucky to get one of those. I’m glad mine weren’t in that category, it would have been costly to send back and forth from UK
@LinearLearnerLO 5 Star Customer service right there.
Thanks very much. You laid ihis out well, and was easy to follow.
Thanks. I'm glad it's easy to follow.
does this work for the RVS Ultimate Works Saber Revan with the asteria soundboard?
The tutorial is similar for all SD card loading.
I managed to change all 14 colours to my liking and hopefully will try some sound fonts soon, thankyou for all the help! :)
You're welcome. It's fun being able to customize your saber to you.
Thank you for making this! All of your videos helped me choose the flyte. If I want to purchase fonts on saberfont should I only get CFX fonts? I ordered my flyte not expecting it until March but I was shocked it was delivered in less than 2 weeks!
Yes for your flute only cfx fonts from saber font.
@@GrayPaladin thanks!!
Do you know if the board will still work if you delete some sound bank folders or color profiles? I just got a Shadowblade V2 with Flyte installed and I don't really need more than 2 sound banks and one color profile.
Yes it should still work, but save a backup of the factory setting in case you run into a problem.
@@GrayPaladin awesome, thanks!
Thanks. Will that work on my Shadowblade V2 Darksaber with Flyte Smoothswing from the Pach Store?
Yes, the Pachstore v2 darksaber has the same board and this tutorial will apply to it the same.
@@GrayPaladin Thank you!
Thank you! Just got mine and I needed this so so bad!!!
You're welcome. Glad you got yours. Have fun and good luck if you make edits.
@@GrayPaladin I ended up frying the board. Probably got a faulty model
@@max10hoop How do you think you fried the board? I doubt the model is faulty. Tell me what you did and we can try to troubleshoot it.
hey man, thanks for the work you put in. i just got my flyte the other day, and i've been having a ton of fun with it! subscribed to your channel!
Awesome thanks! I’m glad this video is helping others. It’s a fun saber!
@@GrayPaladin it is! i can't put down my flyte, i just keep changing the sound fonts. i just put in mario and nyan cat. lol. really fun. next would be getting a neopixel with asteria 2.5 to get that awesome blade effect
That emperor palpatine soundfont is perfect for this saber! When I get mine I am for sure going to put this on!
Good plan 😁
@@GrayPaladin I finally got my Flyte and it is amazing! Can you share the link to the emperor soundfont so I can install it on mine?
@@vanguard2595 Awesome, I'm glad you finally got your saber! I knew you would like it. Here's the emperor font
www.kyberphonicfonts.com/product/emperor
Great video and will be most helpful when mine arrives in 2 days, do you by any chance have a link to where you got the sideous font and the krell font from please.
www.kyberphonicfonts.com/product/emperor
repulsecustomsounds.com/collections/custom-collection/products/traitorous-general
Great video and great sounding fonts. I just have to stop myself from recording my own voice intro for the wakeup/boot sounds now! Thnx
It’s hard to resist lol
@@GrayPaladin Yeah especially as I have been told I "have a face for radio and a voice for television"! As you might be able to tell I don't like the sound of my own voice.
What up GP..Not sure if it was mentioned but is this for Proffie in general. Not specific to the Flyte I'm assuming.
Did you watch? Not Proffie at all. More specific to flyte, Asteria and CFX
@@GrayPaladin Got it. Thanks for the clarification.
Once I get a saber this is going to help so much. I saw in your Bors Dragon Slayer review you didn't like the swing. Would this also be how you'd adjust the swing on your Bors hilt?
Great tutorial and thanks for your time!
The Bors was different at the time. It used an Asteria 2.0 soundboard. I have sold that saber mainly because it didn’t have the hybrid swing. Since then Asteria has updated their board so now it has accent swings. Making font changes is the same in that you just have to use the SD card.
@@GrayPaladin Very cool. Thanks for information. Much appreciated!
great review but is there any way where you can change the ignition effect i really love the senate majority and i have it installed and used a cfx from a commenter from that reddit page and i did save and backed up but nothing is happening its the same one as the normal bank3 is there anyway you can change the ignition to match the one from the video
Are you talking about the power on sound? If so, it's as easy as replacing the power on file.
@@GrayPaladin no im talking about the effect if you look at the reddit page video it has like a power delay then it powers up
@@graciesafatdog3687 It's a budget saber. The saber doesn't have that option
@@GrayPaladin ah i figured as much well thanks for the help its my first time talking to a youtuber so this is pretty exciting
@@graciesafatdog3687 You're welcome. I hope you're still enjoying your saber.
Gonna have to refer back to this after I get mine, thank you for making this!
I hope it helps and hopefully you get yours soon.
Great tutorial!
Is it possible to do a Color Matrix tutorial for the blade and FOC colors?
I already have a chart for the colors, but the way they set them up is a bit confusing.
Thank you in advance if you could do this for us. :)
You want to know how to add more colors or a list of the numeric values for each color?
@@GrayPaladin A general explanation would be good, mainly what primary/secondary color are. Tried a bluish flash color and it flashes red, while the blade has the correct color (primary/secondary set to white for darksaber)
@@GrayPaladin Hi, any general explanation regarding the colours would be great, this is my first saber and I'm a little stuck on achieving the colours I want
@@MonCallumari If you want custom colors you'll have to enter the RGB number values in the config file. This could be frustrating as the values vary on the spectrum and may not directly reflect on the saber without tweaking.
I personally find the preloaded colors to be sufficient on the Flyte.
@Gray Paladin thanks for the quick reply! I'm going to have a play around tonight but I agree that preloaded colours will most likely be sufficient
What if the cfx file has less files in the folders than the original sounfont folder example it has clash 1-16 on main file but cfx file only has clash1-8?
It's okay. You will just have 8 clash instead of 16. That varies from font to font and are non-essential to operation as long as you have at least one.
@@GrayPaladin thank you, also is there a way to change blade effects on this particularly board as well ? I added a pikachu font to bank 1 and I would like the blade to be a flickered effect rather than it be a stable effect.
@@theguyver13 Unfortunately no
@@GrayPaladinThat's a bummer LOL. Well at least I have the files to do so on a neopixl Saber when I get one I guess. Thank you again for your help. Love the videos.
Awesome video as always! So helpful cant wait till I get hands on it!
i accidentally removed my USB cable before ejecting. Will this damage the saber?
It's possible. You won't know until you have problems. Most times it shouldn't be a big issue.
@@GrayPaladin ok thanks!
hi if i were to get a Fallen flyte saber with no sound but can still light up could I still up load sounds to the handle?
No sound is not an option. All Flyte sabers come with sound.
@@GrayPaladin if you can go to their site and look and come back and explain to me what that option is that would be great because i tried talking to them and the have ignored me so far
Please help gray paladin just got mine very excited tried switching sounds but every time I plug into computer it says can’t recognize and it leaves the sabers board on and I have to take out the battery for help
I would really appreciate the help
Have you made changes before? The format of new fonts has to be the exact same. If files are names incorrectly the saber will not function properly.
Have you made changes before? The format of new fonts has to be the exact same. If files are names incorrectly the saber will not function properly.
@@GrayPaladin I have not even gotten to that step yet because it doesn’t even connect to my computer but it worked after a few tries idk what caused te problem
@@legendroyale7017 Battery is fully charged?
When you connect it to the computer you have to tap the switch once.
Timestamp 1:23 in the video.
how did you get ksith on your lightsaber because i can't figure it out
The video explains everything. KSith is no different from any font really. It's mostly drag n' drop. Some files may need to be renamed. What problem are you having?
I buy anakin soundfront but it didn’t allow it to go on the saber
@@Doctor-Who-2017-and-Gamer Is it CFX format? You're trying to put the font on a Flyte lightsaber?
It a CFX and proffie but what I did I buy the neopixel core and blade
And I put it on my black saber hilt and what I did is try found out how to add sound front to it but it hard to find it am kind of new to this
When I plugged my Flyte into my computer nothing happened. Now it will not boot. Any suggestions as to what's up with it?
Did you tap the power button after you plugged it in?
@@GrayPaladin yeah it seems I had a similar problem to the guy further down in the comments. Popped the battery out, waited a few and popped it back in. Works fine and was able to edit fonts no problem.
How do you switch between fonts while the saber is on?
That's not possible with any saber. You have turn off the blade, change fonts then power on again. The latest Verso soundboard update let's you switch between fonts while on, but it's when adjusting settings.
I tried this, but it didn’t registrer my saber. I unplugged it, and now my saber wont turn on or react at all... any tips:(
First make sure you're using a data cable and not just a charging cable. The one that comes with saber should work. Did you press the a/v switch once after you plugged it in?
@@GrayPaladin I used the one that came with the saber, and I pressed it yes. I could not remove it safely thou, as my pc did not register a device to remove.
@@GrayPaladin when I plug it into my pc now and press, it does register the blade, but says windows can recognise the device.. and it still won’t turn on
@@PepeKahnmann Hmm, I'm not sure at this point. Make sure it's fully charged and let it power off. Then boot it again and plug in. Maybe even try a different cable. If you haven't made any edits to the saber yet I'm not sure why it's not being recognized.
@@GrayPaladin happy news - I left it alone for a while (you know, to show who’s boos), then took out the battery for about 20 sec. and now it works again !!!
Do you know if there is any way to choose what volume it boots at? I usually practice at night and its super loud initially.
🙏🙏🙏
Can you only have up to 14 colors at a time? Or can you add more while still keeping the others already loaded
Pretty sure you can add more while still having the others👍
I'm pretty sure you can it's just recommended to only have 14
You can add more.
I did this it stopped working I don't know why can you help me
1. What font did you add?
2. Did it double check that all files are named properly?
3. Is the saber charged?
@@GrayPaladin I only plugged the USB in and taped the button I waited 1min nothing happened I unplugged the Saber to see if it was not dead it wasn't so I puged it back in than it .turned on by its self than I un plauged it i tried to turn it on nothing happened I opened it up the little green light was on and than I charged it nothing happened and I got it yesterday can I send it back?
@@iceyenmey424 You can try and send it back, but I would contact them first and see if they can troubleshoot.
One thing to remember, do not just unplug from your computer. You should click eject from the computer menu then when it says it's safe to remove you can unplug.
Also, read the instructions. It may tell you how to do a hard reset of the board.
@@GrayPaladin there's no hard reset im going to try and Contact the pachstore thank you for your time God bless
What’s the deal with the end lock files
They are not supported as far as I could tell.
@@GrayPaladin damn, thanks!
Hey man! Love your content!
Is it possible to add "preon" files, like the ones from Greyscale Fonts, so you might have the effect from powering up on the Flyte?
Good question. I haven't tried so I'm not sure.