GTI Ksport Coilover Install
ฝัง
- เผยแพร่เมื่อ 26 พ.ค. 2021
- ➡️Coilovers - bit.ly/GTICoiloversKsport
➡️Strut Spreader Socket - amzn.to/34owonO
➡️Pass-Through Socket Set - amzn.to/3vsikFJ
➡️How to Safely Jack up a GTI - • Video
Support the Channel & Team -
shop carmaspeed gear - carmaspeed.com/
awesome amazon list of tools & necessities -bit.ly/toolsfromcam
More Content -
carmaspeed podcast - / @cameronalfordbonus
Cameron Alford 2 Channel - / @motowithcam
Disclosure: This video includes affiliate links, meaning I may receive a commission for purchases made through these links at no additional cost to you. This helps support the channel and allows us to continue to make content like this. Thank you for your support! - ยานยนต์และพาหนะ
Ngl I love these types of videos with building cars over times
Right, I think it’s because it seems more realistic to most people.
Generally a rule of thumb I go for when dialing in preload on the springs, is about a half inch spring compression in the front. Different manufacturers may be different or even come with a preset preload and not recommended to change it. As far as the rear, put the wheel on with a couple bolts....adjust the collars on the spring perch, then jack up the suspension so it's sitting on the suspension and not on the lift as much as you safely can and see where it's at. Trial and error and adjustment....continue to adjust the rear spring perch until you get the height where you want, then roll in the shock in to match the height. The weight of the car is the preload.
You’re channel is literally the reason I bought a mk7 gti thanks so for the vids!! 🤙🏾
You gotta upgrade those headlights. The base headlights bring these cars looks down so much!
Forreal, lp headlights are like the signature look for mk7’s
I prefer them, theyre less douchey
@Bryce Czirr who cares, just get some off eBay or whatever. I had some and they looked great, plus no need to upgrade the grille.
Or get the 7.5 lights, either way the car will look much better and more high end.
@Bryce Czirr oh yeah you’re right, I forgot that the ones I decided to get didn’t have the red stripe in the headlights so It didn’t matter, I totally missed that part 😂
@Bryce Czirr What do you mean a poser? Like the 7.5's are less cool?
I’m loving this series! The GTI is looking real good. I’d upgrade the headlights as well.
One of your best edits yet! Straight to business and easy to follow!
I’m inspired by your patience and attention to detail.
Just watched all GTI video's on a roll. Great vibe and content!
Beautiful fitment! I have that same “Remove before flight” tag on my keychain as well haha
That looks so flush and perfect! It sits just right 👌🏼🔥
You are a professional my dude!..love your work. I'm Getty my gti-07 mk5 in 2weeks..love to get these coilovers!!
great video, huge help with the height adjustment before install. Thanks!
You can use a 2x4 with a hole to put bolt through and use a jack to lift strut out of the slot and to place new strut in. . Pretty easy and quick
Such a great video, Cam. The pacing, editing, and information was perfect. Car looks pretty good too ;)
I love the sound of your exhaust. I need that
Just commenting to say that I picked up some BC's and was 100% overwhelmed by all the shit on them compared to the ST's on my MK6 and you addressed most of it at 6:11 so thank you.
Instead of taking out the axel, I removed the 3 bolts at the bottom of the control arm and pushed down on the control arm and lifted the ball joint bolts up off the control arm. That way I didn’t have to take out the axel.
Just upgraded to BC's on my car today!
This was a dope video. Chilled and informative
I look forward to your videos every week
Really been enjoying your channel - good stuff!
Nice build you got going on here man.
Good work Cam, thx for the vids
Hope you did an alignment after the install. I aligned mine after I installed my coils.
Love your videos man! I had a 2016 GTI Autobahn up until today when i rear ended another car at 45mph. Now im a former gri owner! I had a dp and tune ready but not anymore.
That's the worst I feel 4 u, hopefully u don't get discouraged and get another gti
@@lewisberry8657 im not discouraged but i want the new ones. But probably 2020 used at the most expensive
@@shaqwal676 I have a 2020 Autobahn, but I'm not selling anytime soon lol! I wish you luck on finding something!
I enjoyed watching this💯💯 stance nation!!
Looks hella amazing 😻
Duudeee the gti looks sick bruh
Anyone else heavily relying on Cams videos for their gti due to the lack of good gti content everywhere else on TH-cam?
No. Lot's of good Mk. 7 GTI content of TH-cam elsewhere. but Cameron does have a nice vibe. This vid in particular. I like straight to business.
love your content bro 🔥🔥🔥
That GTI is sitting good bro
Yes Finally!🤘🏻 keep it up mate
Looks dope man
Every time cam posts a video he gets another 1k subs
So the camber adjustment on the top hat can’t be adjusted while installed in the car? 🙂
Ga i wanna do this so much to my GTI. But the thought of having to buy all those specific tools. I think i'll just look into a shop doing it for me.
Feening for the subie!! 🔥🔥
wow imagine living in a place where you can have a hoist outside.. Greetings from the great white north lol
It’s not all it’s cracked up to be… greetings from the devils asshole!
Hi I’m az also hope to see you at a local meet one of these days
Great video
Dude, thank you.
Great video, but there is no need to loosen the driveshaft to swap out front shocks
Do you know what the final measurements were for that ride height?
Hey I just wanted to ask about what you think of Ksport as a brand. I know you’ve put them on all of your cars and because of you I am looking at a set for my mk6 GTI. Just wanted to know how they have held up for you over time and if you have had any other issues with these coil overs.
Crazy content back to back like drake 🤯
So what happens to the dampening system between sports and other modes?
Assuming that no longer works? It's why I'm not lowering mine.
You should do a turbo civic In the future that would be fun to watch
good I saw that you have the ofroad activated on the radio, how did you do it? I already have it activated and it doesn't appear in the list on the radio
Love ur content i am doing a lot of unitronic mods on my mk5
Mk5 gang💯
I can't believe I've installed so many struts without that strut spreader socket... Time to hop on Amazon 👌 Great content Cameron
Wouldn’t you need to do an alignment after putting on a coilover kit? I bought the same kit and I was just wondering if you need an alignment after putting them on
As you know I’ve been with you since the extreme early days. But I am just amazed at how far your confidence and ability have come with every new video.
How are you doing my friend. Do you think I use that coil overs on my Chevrolet Aveo5 2009 ?
Love your chilled videos! I have a question regarding the new R. If I install coil overs will that mess up the R’s Dynamic Chassis Control (DCC) variable suspension settings?
Provides a choice of Normal, Comfort or Sport modes. Using the digital slider via the infotainments system. I’ve seen the DCC has 15 settings
You either have to get the coilovers that are made for dcc, or get the dcc cancellors
12 point Allen head sockets or "triple squares" are a must have for most if not all euro cars. Especially the German ones, and ESPECIALLY anything from VW Group. Which at this point is basically everything. Cause VW owns it all almost.
YESSSS LETS GOOO!!!
Can I camber my wheels with the coilovers or do I need a camber kit too?
Did you keep the spacers on the front? You never got any rubbing?
Just installed lower springs on my R. Went right into it without knowing u need a 12 point spline bit socket I just used 6 point torx, definitely not recommended but is possible with minor damage to bolts.
What size 12 point?
@@oscarr1762 3/8 socket workd as well
I'm located in cave Creek area. looking for a mk6 or mk7 if I can find one gti coupe. I'll build it up, suspension and bolt ons, any tips other than watching the man himself?
Was gonna go with BC coilovers but you made me choose the Ksports, they’re like $300 cheaper and if you picked them they must be good quality
How are they? Im in the same position right now deciding between bc & ksport
@@Obe2k_ Prob just go with BC
Okai to keep stock end links if im planning to lower them all the way?
How many inches was the drop? Debating on springs to save some $
i put a dogbone mount in my car and now it violetly shakes when moving from a stop but after like 1100 rpm its stops so 800-1100 range
Should I buy an fa WRX or a GTI for my daily?
Did u use the stock sway bar end links ?
I swear u neva lied.. I lowered my Dodge Charger one inch and no one could figure out why they looked so good on the wheels. Just one inch
What extension is used for the impact
Yep. The rotors are legit.
When u buy them. Is it 1000 for all 4 or is is separate
I have the DCC and all my options are too expensive:( and I’m not a fan of bypassing the DCC
What wheels are those? Size and such with tires please
when it comes to the gti's with dynamic chassis control, do you have to get a dcc cancelation kit to run any aftermarket coilovers?
you dont have to, but it will remedy the fault, as its still looking for the OEM dcc suspension
Where did you get your wheels
recommend your coilovers
do you go to alot of car meets ?
Are those Audi wheels forged or cast?
Torque spec for the rear suspension???
is that audi rs rims
?
coilovers are the first mod anyone should do
this vid is making me nervous about how I installed my coils and adjusted the rear height
Why do those top bolts look like hardware store bolts? I hope it’s not low tensile hardware bolts haha you’d have a bolt sheer pretty quickly at the worst possible time.
How are these after a year
Which rims are these
Good video, but u should use new hardware and top hats cause there stretch bolts.
What year GTI is this?
Some job that was not sure that I got the guts for that 😅
What feels faster your focus or the gti?
My friend whom drives an mk7, thinks my ST pulls harder longer whilst in passenger seat.
Ponele los centros de VW a las llantas !!!
Mom: Why is there a flesh light under your bed. nah its not a flesh light its a shock cover 14:12
Sheeeeeeeeesh
Brother u got a plastic oil pan get a street shield asap I destroyed mine on my gli w a turtle and it was a steel pan imagine what can happen to urs🥲 also get a street shield from ECS
Yes definitely, I got one after I ran over deer debri and f up my factory lip and under belly plastic. Was thinking about a metal pan from usp motor sport.
@@lewisberry8657 You can also use the Alltrack underbelly pan. Dont forget the brackets though as these bolt to the subframe of the car rather than just the bumper.
The core of your rear shock absorber is wrong,About 1 week after the new coilover is installed, the rear body will be lowered by about 0.5-1 inches
can u black it out
you should put never seize on those adjusters,aluminum can gall
rear sway bar
Concur. Also the plastic swaybar end links can be replaced with Moog K750809 ( paint them first) which do the job great and are low dollar replacement
I was hoping you were going to bag them instead, but K-Sport is a solid brand especially to new car guys.
Just a heads up to the new guys, after installing coil overs make sure to take it to an alignment shop right afterwards. After messing with suspension always take it to the alignment shop.
Why did you pick cheap coilovers on a youtuber/sponsorship build?
I agree, these are 4 applications that usually don't make coilovers for your car.
K sports aren’t too bad. They’re comparable to other coilovers for the price and they do the job.
It’s called preload
Just wondering why don’t you work on the car as much anymore anymore?
Pretty sure cause he’s more focused on the filming and getting the perfect angles. Randle does more of the “work” so he can focus on the filming 👍🏼
@@justincox7656 that’s what I figured I don’t blame him good film makes people want to watch