I love that you guys are having a blast doing your hobby and showing people how to make their machines the best. Your machine is running super smooth and you are the best in your trade. I’m sure people are looking up to you.
i attempted to run and tune my first nitro on my own with prety limited success , so i youtubed for vidios to help ,i watched many vidios till i found this 1 and after watching i went out and straight up tuned it up like a dream within a few miniutes , now i hav a inferno and inferno st and madforce nitros ,kyosho!! thanks guys.
This is the best quick tune vid I have seen thus far... I tuned my werks engines in both my hot bodies d8t &my losi 8ight 2.0....this vid has both my cars running top notch thanks Cody!!!!!!
Brushless has it place as well as nitro, gotta have both :) Nitro =sound, smell and better feeling of a 'proper model' Electric= quiet, clean, convenient and relatively hassle free
Yup Paul and Cody rock, Paul knows his needles and engines that's for sure.. Learnt a lot from them overall, I've just moved to reds racing team tuned engines as did "they" ... Awesome vid..
I am just starting back out in the RC car side of things a had one when I was in school but it’s been a good couple of years since when the engine is run in how long can you typically run them fore before letting it cool down
Good clear and to the point. I agree with your video. I am a mechanic that deals with carbs all the time and this is just the same as a full size carb. These ppl that don't agree need to stick to efi fuel systems
Do you know if there are any other manufacturers cvds' or driveshafts that fit the MP9? I am looking for other Manufacturers cvd kits or driveshafts from other manufacturers that fit the MP9 wheel axles. Thank you
Good tuning guide. I think a lot of people get hung up on numbers and whether it's temperature or counting turns out on the lsn or hsn or having a .7mm idle gap, etc.... forget all that and tune for performance and use your ears and eyes to tell you if you're on the right track... which is essentially what they are doing here.
Are bigger engines easier to tune than smaller engines? I had a 1/18th nitro truggy with an LRP Z1.2S (if that means anything to anyone. Basically tiny!). I tuned it pretty well in the end, but I found it very finicky to get "just right". It made me wonder if the more common size engines are easier to live with?
Kj16V I would say a larger engine is probably more stable on the tune. A small carburetor with bigger machining tolerance probably wont work as well. The .21 size engines are race bred, so the manufacturers spend a lot of R&D time on those engines, and generally have strict quality control.
THE ULTIMATE SECRET FROM WINNER RACER!! In all the videos I've watched about carburetor adjustments for nitro rc engines not a single one talks about the secret I'm about to reveal to you that makes the difference between first, second and third on the podium. The low speed must be adjusted richer than normal but the motor must still turn well between 1/4 opening and 3/4 because the needle in the center of the slide controls from idle to 3/4. From 3/4 to full trottle you can put the slide needle in your pocket and it wouldn't change the mix. The result is that when the engine is running full throttle and you release the triger quickly the engine wants air and fuel but the slide is closed so a lot of gas (and oil) goes into the engine and cools it down and lubricates it better. Think about this.. How many seconds do you keep full trottle in a race...2 or 3 seconds.. then you can adjust the high speed needle leaner than normal and gain rpm and horsepower and by releasing the trigger very quickly for a fraction of a second like before entering a curve it cools much more and the temperature of the engine will not have time to rise above 250 degrees and you have maximum power.
Hey guys, I just got in the nitro Inferno, I was wondering where I can get an electric starter for it? I noticed that you have one on yours. Great videos keep up this awesome hobby!! guys thanks
I took my ansmann out for a run on some dirt today,and when i break it cuts out and its not running right but with everything i know on a rc car thats one thing i dont know how to do (tuning)....
Hi im new in rc nitro car hoby.i just bought habao hyper 7 tq2 and is a real pain in the ass to start.I saw on internrt starter boxes and i would like to know do you need to replace the pull start system with soomethig or i just leaved there.(i have COPS start system)
yeah I saw where he switched pretty sweet looking engine! i gotta ask how do you like the composite carbs because ive always had great results on the full aluminum body carbs or does reds have a full alum carb?
The Reds carb is composite, but the entire internal assembly is aluminum, including the low speed seat and slide bore is all one piece. I am duly impressed with the quality and consistency of the Reds carb.
Ok yeah i will tighten it more thank you for helping me out. Im into this sport two years now and still learning everything i can man i bet ive watched this vid 25 times now i just love the way that thing is tuned is that the 3 port or 5?
hey, I got a TMAXX 2.5 and I got a perfect tune on it, lots of smoke on top, no bogging, no lack of performance, smoke on bottom end, nice idle, but the temps are just way outa control...the Top needle is at about 5 turns from the bottom and the bottom needle is flush with the housing and slightly more rich, car RUNS great, but the temps are always around 250-280...I dont know what Im doing wrong, when I richen it to bring them down, the engine bogs down and garbles fuel and stalls alot, cant even idle without stalling, so if I put it back to factory, its too lean, so I richen back to my settings and the bad temps come back...
the stuff around the fuel tubing is heat shrink tube.. we use that in order to keep the fuel line from cutting if someone lands on top of you (affectionately known as waffle stomp). If your filter is leaking, you need to use two pairs of pliers and cinch that dude down. The stuff on the needle housing is silicone sealant.
I am using in my Truggy a .21 3p turbo buggy engine, and he is not getting higth Rpm fast like i want. I use 13/46 gear, should i put a 12t clunch bell will help.?
Guys you forgot to mention the right glow plug selection for right condition of weather which is an HUGE impact for reliability against cut out's on the track!
You only want to run a cooler plug in very hot conditions, like above 100f.. otherwise we always run the same plug, Reds T5C. The Reds T5C is the best plug on the market, in my opinion, in terms of durability and heat range (hot). The engine should not stop running because of the wrong temp range plug, unless you are WAY off. It's more of an ignition timing thing to advance the combustion with a hotter plug vs. colder. If people can't decide, I usually recommend the colder range to avoid detonation and subsequent engine damage from pitting.
I have seen and herd the werks b6 pro engines matched with either 2013 for a smoother power band or 2058 for a bit more on top end power werks pipe I currently run the os .21 xz-b speed spec 2 but really not that big of a jump from the os xz-b max blue head from what ive ran. You will get great torque and rpm out of all the engines i mentioned.
hi a just bot a novarossi 4t buggy and am having problems starting it the piston keeps jamming and at top dead center almost like its ceasing up av ride every fin av bean told still not a bull to turn it over any fine you could suggest fanks would be gratefull ..............James
If you are looking for some wreckless engines to put in a buggy then you can go with. novarossi keep off .21 7 port, orion .21 crf 5 port factory tuned, werks b5 pro, alpha a852 lutz(accidentally put it in the other post should have been the 830 dragon), these are just a few .21 engines there are also a bunch or bigger displacement but if you are going to go racing one of these are the prefered engines. if you are willing though i would totally recommend the os speed .21 it is a bit expensive
Nice vid man, I've always thought those engines look like a piece of art (never got to see one in person yet though) have a few questions about it. How's tuning it, how's it hold a tune, and will it fit on a Revo with slight modification or does Team Orion make a engine for the Revo?
buy the Os that is made for a revo. It will cost the same. Not to mention that Orion does not make a traxxas fitting engine. the Os is a direct drop in and tunes better then any engine on the market
What is that around your fuel tubing to keep tight and i noticed some seal around your main needle housing if you dont mind me asking because im getting bubbles before and after the filter thanks.
my nitro buggy on "idle" accelerates like its full throttle and doesn't idle with out the tires spinning, can you please make a video more in depth on how you know that everything is set up right and if the idle is correct how everything should be with a tuned engine
+jett presepio because you have to richen up the LSN a hobbyking rep told me and I saw my idle screw was way out lol I'm going to get the LSN just right when the idle screw is at max tight as I'm running supercharger I have my HSN at maximum open and I still think I'm going to run out of fuel. : (
try to heat your engine up if this is a new engine we are talking about here then your engine sleeve needs to be "broken in" just run your engine slightly rich at around 200f for a gallon or 2 and you should be fine. just make sure you warm up your engine. if this is a problem and it still gets stuck loosen and i say only loosen the glowplug a bit just so you can relieve the engine from some of the compression.
hi dudes thanks and congrats to ur work. keep rocking... pls clarify me how to tune my nitro buggy to high speed,im using novarossi pro engine with 4.5cc,scale:1/8 buggy.
this is a Kyosho Inferno MP9 buggy. Cody has piloted this buggy to four consecutive World Championship finals, including the victory in 2010. He's been driving the MP9 buggy since 2008 and the Inferno line since 2002.
Oh thanks! and that is pretty interesting, I have been wanting to get into racing but there is nowhere near me that does Nitro racing, only electric and that doesn't interest me sadly, I have a bunch of Kyosho Nitros along with an Inferno TR15, I enjoy restoring cars that have been bashed to the point they are completely broken.
hey paul old post i know but one of the best if not THE best nitro engine tuning videos out there still!!! I was just wondering what the shock piston/oil/ bladder settup yall are running in this video because this is a very similar style track I run and I'm driving myself bonkers on to trying different oils and pistons Im currently running front 1.3 8 hole kyosho pistons with associated 42.5 oil and rear 1.4 angle 8 hole pistons with 32.5 wt associated oil.
Hello everyone, im a owner of a new nitro rc turnigy and im new on this , yesterday i broke the suspension with minor accident, my question is : the quality of these RC re to weak? or something? .. i have 2 buy another suspension ? ... its just a hobby 4 me, not for race. thx !
the buggies are a delicate balance of performance and durability.. the plastic suspension pieces are not too expensive, just order the parts and fix it.. have fun! :)
nitro james its a team orion, team edition crf .21 with a 2058 mid-high pipe there is also a team edition of that engine that has a few nic nacs here and there that increase power and fuel milage (although physically speaking you can not make an engine more efficient)
that particular pipe was the Orion 2058.. it works well for that engine, and it's EFRA legal for use in Europe or International competition. The bigger horsepower pipe is 2013.
depends on how much you wanna spend. if you have the money a os speed or a novarossi keep off .21 7 port would be good. if you wanna get orion get the orion factory tuned .21 5 port. there are a couple others out there but the nova or the speed would be my choice
Albert Bloch you run it leaner. leaner = more air mixture and less fuel = more power. But with that comes less lube and higher run temps. You need to read what the max temp is for your engine. Use a www.amazon.com/Duratrax-Flashpoint-Infrared-Temperature-Gauge/dp/B00144E8A4 to make sure you don't go to lean and get engine damage.
I learned 100% more about RC cars in the last few hours than I did in 60 years.👍
I love that you guys are having a blast doing your hobby and showing people how to make their machines the best. Your machine is running super smooth and you are the best in your trade. I’m sure people are looking up to you.
Thanks Cody and Paul. I will put this into practice with my Losi 8 and Hyper 7
i attempted to run and tune my first nitro on my own with prety limited success , so i youtubed for vidios to help ,i watched many vidios till i found this 1 and after watching i went out and straight up tuned it up like a dream within a few miniutes , now i hav a inferno and inferno st and madforce nitros ,kyosho!! thanks guys.
We need more of this now ASAP
Let's get it going
This is the best quick tune vid I have seen thus far... I tuned my werks engines in both my hot bodies d8t &my losi 8ight 2.0....this vid has both my cars running top notch thanks Cody!!!!!!
Hi cody and paul ive just got my new kyosho mp9 tki3 and i love it.
sweet cant wait to see this thing in action during a race good luck to Cody at the races hope i can watch one in person someday.
Brushless has it place as well as nitro, gotta have both :)
Nitro =sound, smell and better feeling of a 'proper model'
Electric= quiet, clean, convenient and relatively hassle free
Yup Paul and Cody rock, Paul knows his needles and engines that's for sure.. Learnt a lot from them overall, I've just moved to reds racing team tuned engines as did "they" ... Awesome vid..
How can you tell what year your vehicles are? I know they are between 2000 -2006
I'm not sure what make they are either.
I inherited them.
Car sounds awesome dude well done!!!!!!!!!!!!
Excellent tutorial. Very simply laid out.
I am just starting back out in the RC car side of things a had one when I was in school but it’s been a good couple of years since when the engine is run in how long can you typically run them fore before letting it cool down
Craig Woodgate when tuned right you can run all day. You will need to charge the rx battery before worrying about the engine.
Good clear and to the point. I agree with your video. I am a mechanic that deals with carbs all the time and this is just the same as a full size carb. These ppl that don't agree need to stick to efi fuel systems
i read that you should put a filter on the exaust side becasue it keep cool air going into the tank and help car run better.. is that true?
Do you know if there are any other manufacturers cvds' or driveshafts that fit the MP9? I am looking for other Manufacturers cvd kits or driveshafts from other manufacturers that fit the MP9 wheel axles. Thank you
Good tuning guide. I think a lot of people get hung up on numbers and whether it's temperature or counting turns out on the lsn or hsn or having a .7mm idle gap, etc.... forget all that and tune for performance and use your ears and eyes to tell you if you're on the right track... which is essentially what they are doing here.
I've got some questions to ask I've got the same engine as yours?
Metro Demon is that your question? Maybe you have the same engine?
Vrcmag what engine does that buggy have
Thanks for the info. Having trouble starting up my losi nitro truck. Might be the glow igniter. It''s a cheap one and doesn't seem to hold its charge
Are bigger engines easier to tune than smaller engines? I had a 1/18th nitro truggy with an LRP Z1.2S (if that means anything to anyone. Basically tiny!). I tuned it pretty well in the end, but I found it very finicky to get "just right". It made me wonder if the more common size engines are easier to live with?
Kj16V I would say a larger engine is probably more stable on the tune. A small carburetor with bigger machining tolerance probably wont work as well. The .21 size engines are race bred, so the manufacturers spend a lot of R&D time on those engines, and generally have strict quality control.
THE ULTIMATE SECRET FROM WINNER RACER!! In all the videos I've watched about carburetor adjustments for nitro rc engines not a single one talks about the secret I'm about to reveal to you that makes the difference between first, second and third on the podium. The low speed must be adjusted richer than normal but the motor must still turn well between 1/4 opening and 3/4 because the needle in the center of the slide controls from idle to 3/4. From 3/4 to full trottle you can put the slide needle in your pocket and it wouldn't change the mix. The result is that when the engine is running full throttle and you release the triger quickly the engine wants air and fuel but the slide is closed so a lot of gas (and oil) goes into the engine and cools it down and lubricates it better. Think about this.. How many seconds do you keep full trottle in a race...2 or 3 seconds.. then you can adjust the high speed needle leaner than normal and gain rpm and horsepower and by releasing the trigger very quickly for a fraction of a second like before entering a curve it cools much more and the temperature of the engine will not have time to rise above 250 degrees and you have maximum power.
The idle controls idle. It doesn’t control
After that. Just how much fuel loads up off idle.
@vrcmag Hello! What is the song used in this video? Thank you!
Awesome AWESOME video man. I have an Orion crf engine. Can I use os plugs ? I can not find orion plugs
Hey guys, I just got in the nitro Inferno, I was wondering where I can get an electric starter for it? I noticed that you have one on yours. Great videos keep up this awesome hobby!! guys thanks
Patrick G the starting box? They are sold everywhere.
loosen the glow plug and if that doesnt work well tell me
What's the song at the end?!?
how many laps at high speed and at low speed you on this engine ? has the same engine myself
Thanks guys! its good to take it from the Pros...
I took my ansmann out for a run on some dirt today,and when i break it cuts out and its not running right but with everything i know on a rc car thats one thing i dont know how to do (tuning)....
Does it sound like it's rich? Leave the ignitor on while you get it going.
What would u two recomend for a beginner 4 wheel drive buggy
got my first nitro car and as soon as i start it engine it accelerates without me touching the throttle how do i fix this?
is your trim set right?
Or the bottom end is to lean or the idle gap is wrong
Any tracks for nitro in northern California can't find anything
what are those shock absorbers like the screw ones cuz i have the ball one.
and i wanna get the screw one but i dont know what it is called
I bought a used Ofna lx with k4.6 engine. The buggy couldn't run on grass at all, it lacked power. On pavement runs fine. I dont know whats wrong😭
Hi im new in rc nitro car hoby.i just bought habao hyper 7 tq2 and is a real pain in the ass to start.I saw on internrt starter boxes and i would like to know do you need to replace the pull start system with soomethig or i just leaved there.(i have COPS start system)
yeah I saw where he switched pretty sweet looking engine! i gotta ask how do you like the composite carbs because ive always had great results on the full aluminum body carbs or does reds have a full alum carb?
The Reds carb is composite, but the entire internal assembly is aluminum, including the low speed seat and slide bore is all one piece. I am duly impressed with the quality and consistency of the Reds carb.
Dude i cant even get my losi 8 to idle without the glow plug heater on it. What is going on?
Ok yeah i will tighten it more thank you for helping me out. Im into this sport two years now and still learning everything i can man i bet ive watched this vid 25 times now i just love the way that thing is tuned is that the 3 port or 5?
well there went that piston and sleeve cx
thanks for the reply I'm sure you are pretty busy hope yall are having some good races.
hey, I got a TMAXX 2.5 and I got a perfect tune on it, lots of smoke on top, no bogging, no lack of performance, smoke on bottom end, nice idle, but the temps are just way outa control...the Top needle is at about 5 turns from the bottom and the bottom needle is flush with the housing and slightly more rich, car RUNS great, but the temps are always around 250-280...I dont know what Im doing wrong, when I richen it to bring them down, the engine bogs down and garbles fuel and stalls alot, cant even idle without stalling, so if I put it back to factory, its too lean, so I richen back to my settings and the bad temps come back...
Traxxas fuel may be part of the problem. If you are using there fuel. They use crap to make there fuel. Try a different brand.
im using byron ._. the good stuff, I dont touch their Traxxas shit fuel
can anyone tell me how to identify my Ofna model ? it has a purple motor and green wheels and a white wing.
the stuff around the fuel tubing is heat shrink tube.. we use that in order to keep the fuel line from cutting if someone lands on top of you (affectionately known as waffle stomp). If your filter is leaking, you need to use two pairs of pliers and cinch that dude down. The stuff on the needle housing is silicone sealant.
I am using in my Truggy a .21 3p turbo buggy engine, and he is not getting higth Rpm fast like i want.
I use 13/46 gear, should i put a 12t clunch bell will help.?
ueiger CHAVES it sounds like the spur gear is too small.. switch to a 50T spur. 12 tooth bell is not the best option.
Need help with my Traxxas nitro rc
Unfortunately u r far sir.. if same country , surely I will meet you and help me to tune up..... happy to watch ur video.... wish from batam.
Nice vid. Hi lm looking to buy a new kyosho mp9 tk13 never own one before. Are kyosho buggy any good any help or tips please.
Guys you forgot to mention the right glow plug selection for right condition of weather which is an HUGE impact for reliability against cut out's on the track!
+GTA V Decoders Glow plug temp affects engine timing and not the tune.
HB BC TT zg. um
Deanna Cox what??
ɷɷɷ Heeey Friendz I Have F0unddd Working Online Hacck visitttt : - t.co/d68zyW0v4u
You only want to run a cooler plug in very hot conditions, like above 100f.. otherwise we always run the same plug, Reds T5C. The Reds T5C is the best plug on the market, in my opinion, in terms of durability and heat range (hot). The engine should not stop running because of the wrong temp range plug, unless you are WAY off. It's more of an ignition timing thing to advance the combustion with a hotter plug vs. colder. If people can't decide, I usually recommend the colder range to avoid detonation and subsequent engine damage from pitting.
What starter box did u used???
what is the band and song used in this video?
Yo what did you put on your gas tank on your RC car?
I have seen and herd the werks b6 pro engines matched with either 2013 for a smoother power band or 2058 for a bit more on top end power werks pipe I currently run the os .21 xz-b speed spec 2 but really not that big of a jump from the os xz-b max blue head from what ive ran. You will get great torque and rpm out of all the engines i mentioned.
hi a just bot a novarossi 4t buggy and am having problems starting it the piston keeps jamming and at top dead center almost like its ceasing up av ride every fin av bean told still not a bull to turn it over any fine you could suggest fanks would be gratefull ..............James
thank you for the video made it so easy to tune my nitro buggy.
My first tune took me 30 min. :D
If you are looking for some wreckless engines to put in a buggy then you can go with. novarossi keep off .21 7 port, orion .21 crf 5 port factory tuned, werks b5 pro, alpha a852 lutz(accidentally put it in the other post should have been the 830 dragon),
these are just a few .21 engines there are also a bunch or bigger displacement but if you are going to go racing one of these are the prefered engines. if you are willing though i would totally recommend the os speed .21 it is a bit expensive
Can you plz show me how to tune my buggy it is a bit hard
Nice vid man, I've always thought those engines look like a piece of art (never got to see one in person yet though) have a few questions about it. How's tuning it, how's it hold a tune, and will it fit on a Revo with slight modification or does Team Orion make a engine for the Revo?
buy the Os that is made for a revo. It will cost the same. Not to mention that Orion does not make a traxxas fitting engine. the Os is a direct drop in and tunes better then any engine on the market
What is that around your fuel tubing to keep tight and i noticed some seal around your main needle housing if you dont mind me asking because im getting bubbles before and after the filter thanks.
yes.. it's good. We only use it for the first few tanks to get the initial polish on the piston sleeve, then it's up to you if you want to use it..
No my question is what kind of starter do you have for you nitro rc?
Metro Demon what starter box is in the video? Kyosho.
what kind of rc did u get ?
great breakdown
So is it better to have it running rich or running to lean
never lean your engine too far
my nitro buggy on "idle" accelerates like its full throttle and doesn't idle with out the tires spinning, can you please make a video more in depth on how you know that everything is set up right and if the idle is correct how everything should be with a tuned engine
This is common sense really. Ajust youre idle screw and transmitter trim. Should have been the first thing you did when you fired your engine up.
+jett presepio because you have to richen up the LSN
a hobbyking rep told me and I saw my idle screw was way out lol
I'm going to get the LSN just right when the idle screw is at max tight as I'm running supercharger I have my HSN at maximum open and I still think I'm going to run out of fuel. : (
Anthony Abelardo Super chargers dont work on these engines, They are scams. God, I cant believe people think turbo charging a 2 stroke is that simple
Joselito Pancho
yea that is true but ive had my engine tuned multiple times and doesn't stay the same settings i suppose
+Joselito Pancho Whats the point in having a nitro rc if other people are tune for you
How many price of this rc ??
anyone know the music??
try to heat your engine up if this is a new engine we are talking about here then your engine sleeve needs to be "broken in" just run your engine slightly rich at around 200f for a gallon or 2 and you should be fine. just make sure you warm up your engine. if this is a problem and it still gets stuck loosen and i say only loosen the glowplug a bit just so you can relieve the engine from some of the compression.
WOW that thing's a beast!... Nice track too, I dig the big jump.
why front wheels are back and vice versa?
Is the kyosho mp9 tkl3 rye version good?
yeah very good, but very expensive. New on ebay you are looking at about £639 just for the kit
basically you adjust the screws to get the best performance but at a optimal and stable temperature jfc.
hi which engine you would recomend for racing
thank you
Reds of course ;) www.reds-racing.com/#!
What would be rich hsn signs?
Which exhaust pipe are you fellas using?
av tryd that mate still wont turn over its realy tight
hi dudes thanks and congrats to ur work. keep rocking... pls clarify me how to tune my nitro buggy to high speed,im using novarossi pro engine with 4.5cc,scale:1/8 buggy.
yuvaraj shankar lean it out more for more top end
what is the make and model of dat buggy?
this is a Kyosho Inferno MP9 buggy. Cody has piloted this buggy to four consecutive World Championship finals, including the victory in 2010. He's been driving the MP9 buggy since 2008 and the Inferno line since 2002.
Oh thanks! and that is pretty interesting, I have been wanting to get into racing but there is nowhere near me that does Nitro racing, only electric and that doesn't interest me sadly, I have a bunch of Kyosho Nitros along with an Inferno TR15, I enjoy restoring cars that have been bashed to the point they are completely broken.
What car is in the video?
Chassis/engine
baphisto This is a Kyosho MP9 buggy. The engine is an Orion Discovery, but I think that engine is discontinued. Cody now runs the REDS R7 Evo.
Cool! thanks for answering :)
Kyosho mp9 tki3 with team orion engine
what size is the clutch bell pls?
you mean the gearing? it has a 13 tooth clutch bell and 46 tooth spur gear
yo you should do another one
what kind or turbo engine is that
hey paul old post i know but one of the best if not THE best nitro engine tuning videos out there still!!! I was just wondering what the shock piston/oil/ bladder settup yall are running in this video because this is a very similar style track I run and I'm driving myself bonkers on to trying different oils and pistons Im currently running front 1.3 8 hole kyosho pistons with associated 42.5 oil and rear 1.4 angle 8 hole pistons with 32.5 wt associated oil.
We use 1.3 x 8 straight hole pistons front and rear, 650 front/450 rear kyosho oil
PKpopdU
Do you uses.. the White or Black 1.3 8hole piston
nitrosomniak do 1.3 x 8 hole pistons all the way around with 37.5wt in front and 35-32.5 in the rear with associated oil
nitrosomniak with light blue springs and maybe orange in the rear
what model of kyosho is that ?
i need a starter box..easy start
im tired pulling..
Thanks for the tips, that car has way more jam than mine and a good driver doesn't hurt, lol. Cheers
Hello everyone, im a owner of a new nitro rc turnigy and im new on this , yesterday i broke the suspension with minor accident, my question is : the quality of these RC re to weak? or something? .. i have 2 buy another suspension ? ...
its just a hobby 4 me, not for race. thx !
the buggies are a delicate balance of performance and durability.. the plastic suspension pieces are not too expensive, just order the parts and fix it.. have fun! :)
not to mention the mp9 design has not changed a whole lot from car to car because its platform is just so stable and so proven.
fanks for the help people av got it running now bludy good engine would recommend
nitro james its a team orion, team edition crf .21 with a 2058 mid-high pipe there is also a team edition of that engine that has a few nic nacs here and there that increase power and fuel milage (although physically speaking you can not make an engine more efficient)
thanks
Excellent video
what starter box
Great information.
Where is this track at
Revelation Raceway
that particular pipe was the Orion 2058.. it works well for that engine, and it's EFRA legal for use in Europe or International competition. The bigger horsepower pipe is 2013.
What kinda rc car is this
depends on how much you wanna spend. if you have the money a os speed or a novarossi keep off .21 7 port would be good. if you wanna get orion get the orion factory tuned .21 5 port. there are a couple others out there but the nova or the speed would be my choice
How do you make. A gas nitro car run loner run time. With one that gas goser?
Albert Bloch you run it leaner. leaner = more air mixture and less fuel = more power. But with that comes less lube and higher run temps. You need to read what the max temp is for your engine. Use a www.amazon.com/Duratrax-Flashpoint-Infrared-Temperature-Gauge/dp/B00144E8A4 to make sure you don't go to lean and get engine damage.
Just refill it.