Just need to connect to 12v on bike. The xxx is different but I would just slice the ground and running light not cut on the tail light for power. Then rap the positive and negative around the bare wire from bike. Then tape it. A even easier is to get two trailer wire light connections that just squeeze/pinch over wires so no cutting needed. But you may be able to connect onto the headlights feed or something else as the xxx come with headlight and brake light.
Yo bro I tried this and it would not work I connected it to my taillight and it would not turn on so I tried the key ignition cable and it would turn on but when I would turn the ignition on they would shut off could you give me an idea on where to connect them please ??
It’s possible but the lights don’t use very much power so most likely a bad connection. I would try connecting to a 12v battery or power supply to make sure there isn’t a problem with the lighting unit. Worst come to worst could add a small 12v battery to power lights. Does your tail light dim or not turn on when lights are flicked on? Same with headlight. They both take 12v so they should be effected if it’s drawling to much power.
So u cut the positive and negative tail light wires and then add the led lights to the split then reconnect them so the leds pull power from the tail light? Apologies if I sound dumb
Can I do the same thing with this kit with the talaria xxx?if you helped walk me thru this I promise I'd venmo you for your time
Just need to connect to 12v on bike. The xxx is different but I would just slice the ground and running light not cut on the tail light for power. Then rap the positive and negative around the bare wire from bike. Then tape it. A even easier is to get two trailer wire light connections that just squeeze/pinch over wires so no cutting needed. But you may be able to connect onto the headlights feed or something else as the xxx come with headlight and brake light.
@FloridaERides thank you soo much for the advice! I might make my first video for talaria xxx installing these lights! I'll let you know how it goes!
Awesome!! Please do.
Yo bro I tried this and it would not work I connected it to my taillight and it would not turn on so I tried the key ignition cable and it would turn on but when I would turn the ignition on they would shut off could you give me an idea on where to connect them please ??
I connected to my tail light no problem . Have you put a volt meter to it to see what it’s doing?
@@FloridaERides no I haven’t I connected it. Just fine it could be that my bike dosent enough volts for the lights
It’s possible but the lights don’t use very much power so most likely a bad connection. I would try connecting to a 12v battery or power supply to make sure there isn’t a problem with the lighting unit. Worst come to worst could add a small 12v battery to power lights. Does your tail light dim or not turn on when lights are flicked on? Same with headlight. They both take 12v so they should be effected if it’s drawling to much power.
will it work on an x3
I don’t see why not.
Does the kill switch kill the tail light as well?
No but could disconnect and rewire to headlight switch to do so.
So u cut the positive and negative tail light wires and then add the led lights to the split then reconnect them so the leds pull power from the tail light? Apologies if I sound dumb