Thanks for the video, I have 5/6 years doing photogrammetry (Phantom 3, 4 rtk, Mavic 3E), but I feel that it is already necessary to take the next step to the world of "scanning with LiDAR", shout-outs from Mexico
Nice video as usual. Maybe people should also know all the stuff behind the GNNS antenna like the Emlid, i peronally use the Trimble DA2 but i think you have to configure the coordinate system according with your area, maybe also the provider that send data to the Emlid and so on.
I have a favour. Could you do the Canada drone pilots test. In Canada you need a liscene to fly a drone... 😫. Unless it's really light. And people say the course is hard. And it cost a bit of money. I figured it would be a good test for skills and would give Canadian viewers an idea of what it takes to start flying up here.
Great video, really gives a clear picture of how lidar data is produced. I think you did mention all the key parameters users need to take care of while generating lidar data.
Hi, I'd really appreciate it if you could create a video about the maximum capabilities of the drone LiDAR combo. I'm particularly interested in understanding the highest altitude and minimum overlap required for obtaining quality data on one battery set. Additionally, if it's possible to share the dataset derived from this exploration, I would find that extremely valuable. I'd love to see how the combo performs in an environment with mixed vegetation, buildings, maybe power lines and roads. This would provide a great insight into its practical utility and limitations. Thanks in advance and have a nice day
Hey, Harrison. You mentioned that if you set up over a known point with the RS2 it would help in post. When and where do you factor in the known coordinates? I'm not seeing anywhere in the Rock Desktop to manually input coordinates. 🤔
Great video showing the whole process. The one button press is a great feature on the R3Pro. Do you have any tutorials or suggestions with the corridor mapping? I’m trying to figure out how to maximize a long LiDAR scan I need to do for miles of road capture
HEY DO YOU HAVE VIDEOS ON THE EMILD FLOW? LIKE HOW IT ACTUALLY WORKS. I PUT IT TO TEST AGAINST A TRIMBLE R12 AND MY NUMBERS BACK WERE PRETTY TERRIBLE. I WAS DIALED INTO THE FPRN SO I DONT KNOW WHY I WAS GETTING A DIFFERENCE OF LIKE 3 TENTHS. MAYBE USER ERROR. IDK. BUT IM SUPER CURIOUS TO SEE AS TO WHY MINE GAVE SUCH TERRIBLE VALUES.
Since the R3 pro is also slam, can you fly a mission then take the R3 off and start doing SLAM in case you need extra details the flight may not be able to get?
Yeah, 50m AGL is my general go to. But if it’s a small site, I will first reduce my AGL - then if I still have some room on my battery set (flight time isn’t that long) then I’ll increase the overlap.
Great video! I really like watching the whole process and keeping the video long. How feasible is it to do piloting and LiDAR processioning as your own business, without being a licensed surveyor? Is there any market for licensed surveyors to get this point cloud data from someone who is not a surveyor?
Right now, the R3 Pro V2 has some very competitive pricing options for the full package deal with unlimited use of all its features. Join us for a group session (no hassle) and we can tell you more about it... www.rockrobotic.com/talk-to-sales
Just one other thought for everyone nee to this. During your base set up make sure to put the correct height of your antenna. 2Meter on the provided pole but could vary if you put it on a regular tripod and tribrach assembly.
Question to Harrison and drone pilots: What was your highest and lowest flight altitude, and how did it end? I flew as low as 20 meters in a valley and had to pick up my DJI M2P like fruit from the trees :) Due to the terrain, I once had to fly over 100 meters, and the resolution was practically worse than Google Earth.
![[LIVE] : ONE ลุมพินี 79 | คู่เอก "ก้องชัย vs อาเมียร์"](http://i.ytimg.com/vi/WfPSA1A0NHc/mqdefault.jpg)
Thank you. This is what most people need to start off. Thank you very much. 😁😁👍
Glad it was helpful!
Thanks for the video, I have 5/6 years doing photogrammetry (Phantom 3, 4 rtk, Mavic 3E), but I feel that it is already necessary to take the next step to the world of "scanning with LiDAR", shout-outs from Mexico
That’s awesome! What parts of Mexico are you from?
@@IndianaDrones from Sonora !
Awesome walk through from start to finish. Super accurate LiDAR. Easy to use.
Thank you! Glad it helped.
Great video Harrison, really gives a clear picture of the whole process! Keep the good work!
Thank you!
Nice video as usual.
Maybe people should also know all the stuff behind the GNNS antenna like the Emlid, i peronally use the Trimble DA2 but i think you have to configure the coordinate system according with your area, maybe also the provider that send data to the Emlid and so on.
Excellent video, Thanks Bro. Keep posting good videos
Thanks, will do!
Thank you - I have been trying to find these steps - good job!
You bet!
I have a favour. Could you do the Canada drone pilots test. In Canada you need a liscene to fly a drone... 😫. Unless it's really light. And people say the course is hard. And it cost a bit of money. I figured it would be a good test for skills and would give Canadian viewers an idea of what it takes to start flying up here.
Maybe one day!
@@IndianaDrones 😁. Canada not as Kool as u.s.a
So, is it necessary to be a licensed surveyor to do LIDAR surveys or do you contract to a surveyor?
Great video, really gives a clear picture of how lidar data is produced. I think you did mention all the key parameters users need to take care of while generating lidar data.
interesting staff,pretty cool
Hi, I'd really appreciate it if you could create a video about the maximum capabilities of the drone LiDAR combo. I'm particularly interested in understanding the highest altitude and minimum overlap required for obtaining quality data on one battery set. Additionally, if it's possible to share the dataset derived from this exploration, I would find that extremely valuable. I'd love to see how the combo performs in an environment with mixed vegetation, buildings, maybe power lines and roads. This would provide a great insight into its practical utility and limitations. Thanks in advance and have a nice day
We're working on that now using the dataset in the ROCK Cloud!
This need more views bc I see this ad alot
@harrison
Eager to look at data capture of structures - heritage one with more details in specific .
This is great! We'll have more to come, too!
Lol take away the comma
Hey, Harrison. You mentioned that if you set up over a known point with the RS2 it would help in post. When and where do you factor in the known coordinates? I'm not seeing anywhere in the Rock Desktop to manually input coordinates. 🤔
12:39 there a check box that says use default base station location. Uncheck that and it shows up
@IndianaDrones Gotcha. I'll check that out next week. Doing 200+ acres Tuesday. 🤟
Great video ! Are you using SLAM algorithm to build a map the environment ?
Do you have to upload a DTM for terrain following for the Rock app or does it pull it from a database?
For right now, you can do either on DJI Pilot 2 or UgCS... we're still working through ROCK Pilot for flight.
Great video showing the whole process. The one button press is a great feature on the R3Pro. Do you have any tutorials or suggestions with the corridor mapping? I’m trying to figure out how to maximize a long LiDAR scan I need to do for miles of road capture
HEY DO YOU HAVE VIDEOS ON THE EMILD FLOW? LIKE HOW IT ACTUALLY WORKS. I PUT IT TO TEST AGAINST A TRIMBLE R12 AND MY NUMBERS BACK WERE PRETTY TERRIBLE. I WAS DIALED INTO THE FPRN SO I DONT KNOW WHY I WAS GETTING A DIFFERENCE OF LIKE 3 TENTHS. MAYBE USER ERROR. IDK. BUT IM SUPER CURIOUS TO SEE AS TO WHY MINE GAVE SUCH TERRIBLE VALUES.
Emlid has videos on this! We're seeing good numbers in the open on the Emlid.
Thanks!
Thank you!
Thanks you Harrison.
Does this setup support network corrections instead of using of a base staion?
Hi. Can you import a 3D model/scene captured by the Rock R3 Pro into Solidworks or any 3D animation software?
Since the R3 pro is also slam, can you fly a mission then take the R3 off and start doing SLAM in case you need extra details the flight may not be able to get?
Yes!
Your very helpful thank you
Happy to help
Do you do training aside from TH-cam videos?
Following.
You can enroll and attend one of the In-Person LiDAR Workshops!
➡️ www.pilotbyte.com/lidar-workshop
Hello, Harrison. What is your preferred AGL? Is there a sweet spot for balancing relative altitude and resolution?
To be honest, fly as low as you can. But practically anywhere from 40-50m is good.
Yeah, 50m AGL is my general go to. But if it’s a small site, I will first reduce my AGL - then if I still have some room on my battery set (flight time isn’t that long) then I’ll increase the overlap.
Does having people in your target area affect your Scan capture on both R3 and or R3-SLAM?
Depends on how many people. Ideally, the less the better.
Great video! I really like watching the whole process and keeping the video long.
How feasible is it to do piloting and LiDAR processioning as your own business, without being a licensed surveyor? Is there any market for licensed surveyors to get this point cloud data from someone who is not a surveyor?
So how much is all this cost? And I mean ALL, those posts, survey points, software, etc.
Right now, the R3 Pro V2 has some very competitive pricing options for the full package deal with unlimited use of all its features. Join us for a group session (no hassle) and we can tell you more about it... www.rockrobotic.com/talk-to-sales
You mention the rock pilot app, but i don't see that available. Where can i get it?
Releasing soon. Harrison just has the pre-release version. I've been using R3 Pro on DJI Pilot 2 and has been fine with that too so far.
We are going through some final tests before official release. We are planning for release next month 👍
How to purchase this drone
Hit us up here! www.rockrobotic.com/talk-to-sales
Yeih one more drone to Moscow 😄
Why was this an ad, i dont watch drone videos, i dont even have a drone. The YT algorithm is broken
Maybe you should get a drone...
@@IndianaDrones yeah, but they are very expensive, and i would probably crash it the seccond i get it in the air
Hello everyone, I want to decode pcap file to make a cloud pointd visualization
Just one other thought for everyone nee to this. During your base set up make sure to put the correct height of your antenna. 2Meter on the provided pole but could vary if you put it on a regular tripod and tribrach assembly.
Great point! Appreciate the feedback sir!
I fly very well, I hope you too very well fly beijinhos 🤑🤑
Question to Harrison and drone pilots: What was your highest and lowest flight altitude, and how did it end? I flew as low as 20 meters in a valley and had to pick up my DJI M2P like fruit from the trees :) Due to the terrain, I once had to fly over 100 meters, and the resolution was practically worse than Google Earth.
Sounds like you might want to try terrain follow.
Isn't it awesome!
@@IndianaDrones Indeed it is...
How To Fly
I bet that whole setup must cost at least $400.
You probably wouldn't be a very good contestant on the Price Is Right!
Lol