Tool Haul - Amazon - Dewalt DWV9000 Universal Quick Connect Adapter For Dust - QL Info - 4 5th 21
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Join this channel to get access to perks:
/ @antonioclaudiomichael
Shopping our affiliates Below may earn Antonio Claudio Michael a commission:
olsatools.com/...
DJI affiliate Links Below
DJI Osmo Action
click.dji.com/...
DJI MAVIC AIR 2 Up Your Game
click.dji.com/...
DJI - Mavic Air - Elegance and Power
click.dji.com/...
Ohio Power Tool Affiliate Link Below
shrsl.com/2fdcp
Acme Tools Affiliate Links Below
imp.i284638.ne...
M12 FUEL™ 1/4 in. Ratchet Bare Tool 2556-20
imp.i284638.net...
M12 FUEL™ 3/8 in. Ratchet Bare Tool 2557-20
imp.i284638.net...
M12 FUEL™ 1/2 in. Ratchet Bare Tool 2558-20
imp.i284638.net...
Milwaukee 1/4 Stubby Impact Wrench 2552-20
imp.i284638.net...
Milwaukee 3/8 Stubby Impact Wrench 2554-20
imp.i284638.net...
Milwaukee 1/2 Stubby Impact Wrench 2555-20
imp.i284638.net...
Milwaukee M18 Dual Simultaneous Rapid Charger
imp.i284638.net...
Amazon Affiliate Links Below
Astro 1828 ONYX 3/8" Nano Impact Wrench 450ft/lb
amzn.to/2SJOVq6
Astro 1822 1/2" Nano Impact Wrench
amzn.to/2I31OYx
Astro 7897 Ball Joint Service Tool Kit and Master Adapter Set
amzn.to/2GwL5u1
Astro 7412 1/4-Inch Drive Flex Socket Set, 6 Point - Metric, 12-Piece
amzn.to/2DmKuYU
Astro 9477 Professional Quick Interchangeable Ratchet Crimping Tool Set, 7-Piece
amzn.to/2TH4wEq
Astro 1600 16-Piece Punch and Chisel Set
amzn.to/2MWmv7c
Astro Pneumatic Tool 78825 Master Front Wheel Bearing Adapter Puller Kit W/Grade 8 Drive Bolt
amzn.to/2TGb06a
Astro Pneumatic Tool 65SL 650 Lumen Rechargeable LED Slim Light W/Top Flashlight
amzn.to/2I3zdSR
Capri Tools 3/8-Inch Drive Master Impact Socket Set with Adapters and Extensions, Premium Chrome Molybdenum Steel, 48-Piece
amzn.to/2Gy9W0y
VIM Tools VHC77 '77-Piece' Half Cut Stubby Bit Set
amzn.to/2Gy7Vld
Vim Tools VIMMMS64 Mechanics Master Set, Hex & Torx
amzn.to/2TBQrYx
Vim Tools VIMV458L-SET Long Torx Master Set, Long T10 TRU T50, 4.5"
amzn.to/2GyYgLg
VIM Hand Tools V2300 Push-Pin Removal Pliers Set, 2-Piece
amzn.to/2TCP6Rm
LAUNCH X431 PROS Mini Automotive Diagnostic Tool OBD2 Scanner Code Reader with WiFi & Bluetooth Covering 108 Vehicle Makes + 2 Years Free Update
amzn.to/2ULN41u
Bosch Diagnostic Scan Tool ADS625
amzn.to/2Gwbng1
Power Probe 3896 Chrome Special_Use_Testers
amzn.to/2DkfYyF
Autel Maxisys Elite Diagnostic Tool (Upgraded Version of MS908P Pro) with WiFi Bluetooth Full OBD2 Automotive Scanner with J2534 ECU Programming & 2 Years Free Update
amzn.to/2Dp7tlM
Autel Maxisys MS906BT Upgraded Version Of MS906 DS708 DS808 Bluetooth ECU Coding Diagnostic Tool OBD2 Scanner Code Reader OBDII Scan Tool
amzn.to/2HYGqDp
Please, Like, Rate, Comment, Subscribe, For More, if you like these videos please consider hitting the subscribe button and hitting the bell notification icon thanks all donations go to making the channel better and making more content thank you for the support If You Like Please Consider Becoming a Patreon Member! also, consider donating to my PayPal link below if you have any questions please don't hesitate to ask in the video me or someone else in the comments will try to answer any of the questions asked to thank you for watching hope to see you again have a great day
Paypal.me/AntonioCm1983
Please Check out TubeBuddy use My Link Below will help you make your TH-cam Videos Better
www.Tubebuddy....
Patreon Link www.patreon.co...
DISCLAIMER
Due to factors beyond the control of Antonio's Auto Repair, it cannot guarantee against unauthorized modifications of this information or improper use of this information. Antonio's Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Antonio's Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of Antonio's Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not Antonio's Auto Repair.
This is a zoo finding the right adapters! I own 4 that don’t work!
Stop trying to hold attachments while twisting on. You’re actually preventing the installation. You simply twist it on. Hold tool with one hand, twist on attachment with other. Small suggestion: don’t worry about viewer actually seeing you “unbox” it, do it before filming. This way, you look credible doing the video, time is not wasted, and viewers want to come back for more
And your suggestions have been implemented in newer videos and your point about the attachment one of my attachments is actually not made correctly so it dosent work well ... Also I kinda do need the viewers to see what I'm doing if I'm not In frame of the camera then it's not seen your advice is kinda late Sir
Well that totally put me off buying the dewalt 9000 adapter, it appears to be cr4p
The only way you get dust free with the Dewalt orbital sander is not to use it lol
Based off your comment That would go For Any Brand Orbital Sander! @Experience Precision
Nice tool collection you got, hey I bought a ridgid vacuum that includes the car detailing kit ( 1 1/4 orange hose) it fits to the dewalt dwv9000 connector but when I turn on the vacuum it makes an extremely high whistle noise there is no way I can use this set up, I’m thinking to get your same set up using your same vacuum, have you ever notice a strange whistle noise when powering on you Milwaukee vacuum ? Thanks
I have Never Heard any High Pitched Whistle noise For My setup at all And it works well For Every Tool thst had dust collection I have used including the Milwaukee orbital sanders as dewalt sanders as well as my friend borrowed my setup to use with his Ridgid Sanders for Doing Sheet rock work he didn't have any issues @Armandoarroyo
@@AntonioClaudioMichael I guess is the orange hose due to its smaller hose diameter. That is what I have find out till now. Thanks
@@armandoarroyo no problem at all glad I was able to help answer your Questions. I'm here if you have any questions..
I think, you just need to make a deeper groove on a tool body. That plastic part (on a body) has a partnumber and you can take a second one for Airlock modification.
That is Great information there Yeah I ended up cutting the groove with a Round file a little deeper only took 1/32 off and works fine now just to much left over plastic from the mold process @LastTrainWaiting
@@AntonioClaudioMichael Now, after modification, dust bag still sit strong on a tube?
@@lasttrainwaiting4375 I didn't modify the dust bag I modified the Mount on the tool that the dust bag was Hard to attach to and shaved out a little of the groove
@@AntonioClaudioMichael I mean, now dust bag attach and works as before, worse or better?
I ask, because its a strange story with a Dewalt airlock connectors. In my collection of tools best connection with my dewalt jigsaw and another way is connection with my dewalt multitool dust adapter (shaking and not strong). In both of these ways lock feature works.
they never make them interchangeable that would be to convenient
Right @Danoh's Toolbox
I’m tempted just to take apart the dust bag that comes with the sander and repurpose the collar itself. But then I think that if it were that easy, there’d be videos showing how to do it 🤷♂️
Got bored and did it lol. Just some scissors to snip the bag off and the internal spring falls out on it’s own.
It’s totally doable to then have a dedicated Dewalt hose for your vacuum. Just need to glue a PCV pipe that’s 1.5” right at the outer lip of the collar. Can’t jam anything in there once the bag is off or the bearings won’t engage to lock it on to the dust port of the sander.
I have the same problem with the sander and this attachment. Seems the fitting is somewhat not correct… perhaps its a factory making this sander, that might have some engineering issue their production.. could you tell me what country your sander is made in? Thanks
Update… so after talking with the dewalt product manager in my country, i found out what is causing the difficulties with the orbital sander.. basicly the adapter does work, but once you put it on, theres a first postive stop, where one will think that its pushed to the locking position.. well.. its not.. you have to push further (and with a bit of force), then you will be able to lock it easy.. the swirling on the orbital sander is not as smooth as it may be on other units, but this is how the fabrication was made.. i was recommend tring to cautiously grind on the sleeve with some sanding paper, and like that give the balls bearing abit better gliding room… but the main problem with locking the adapter with the unit, is easy solved by pushing the adapter alle the way down, past the first initial stop.. i hope its clarifies✌️
the grove might not be cut deep enough in the Sanders
True but if that was the case then both adapters would have the problem not just one of them @Danoh's Toolbox
hi, does the dewalt adapter fit your old milwaukee 0880-20 vacuum cleaner, do they have the same hoses? Thanks!
Yes the dewalt hose adapter does fit the Old Milwaukee suitcase vacuum 0880-20 same exact 1 1/4 inch hose It works very well
The m18 fuel packout vac hose as well as the fuel m12 vacuum hose will also work on the old 0880-20 suitcase vac all the Milwaukee vac hoses are interchangeable so you can use the dewalt adapter on all 3 of them if you want
@@AntonioClaudioMichael thanks, a useful review, I have the whole devolt tool and their vacuum cleaner is frankly shit, so I’m considering buying a Milwaukee 0880-20 or a new model, I don’t know what to choose))
@@maslovFedir I agree the dewalt is junk the 0880-20 is a good Vac but it's brushed so it uses more battery power to run so it dont run very long its average is about 35 minutes with a 12ah the M12 Fuel vac is small 1.5 gallon and it runs about 45 minutes to 60 minutes with a 4.0 the M18 Fuel Packout vac is the largest vac Milwaukee has in the portable category it last well over 1.5 hours on a 8ah they also make the new Build your own systems that are 5 gallon and up you can choose if you want a dual battery power head or a single battery power head what size tank but these systems take the larger 2 inch hose diameter so depending on what you need a vac for there are plenty of options... Ryobi makes a 6 gallon that's a good price right now also at 99 bucks
Etsy has the best adapters!
What do I need to join to 1.25" hoses together to make it longer ?
A male Coupler you can get them at he depot for a few bucks in the wet dry vac section @Sveno
@@AntonioClaudioMichael Ah, so that's what they are called. Thanks mate!
@@MrSoloDev your very welcome Mate glad I could help
that could be why they are on sale 😁👍🇨🇦 great video Antonio
Thanks Danoh for stopping by @Danoh's Toolbox
Complicated!!!
gracias por el video, creo que es el único en todo youtube donde muestran la aspiradora 0970-20 usando el adaptador dwv9000. Ya que estoy pensando en comprar dicha aspiradora para usarla con mi sierra dcs520 cuando trabaje en terreno.
They sell knock-off of this DWV9000 adapter on Ebay for $12.00 FYI
Okay I prefer to buy the name brand adapters but I'm sure someone out there will read your comment and be like sweet I need the cheaper one .. thanks for sharing the information @MuahMan
@@AntonioClaudioMichael So you prefer to buy the name brand version that obviously does not work well at all ... okay :0(
@@mdm8285 dewalt name brand adapters work just fine for me Maybe your using them wrong
I’m having same problem with my orbital sander. Thinking about returning the sander. Do you think it will still suck enough air if the adapter is half locked?
I found some crud in the ball decent on the adapter started working fine for me and I have used it not locked and it still worked just fine @Ty yg
All I did was buy a couple more for the price seems to be an adapter problem not a sander problem but I did get the one that had issues fixed it was just a few plastic peices near the ball decent weren't removed from the plastic making I wouldn't say returning the sander over this adapter is worth it sander works fine @Ty yg
@@AntonioClaudioMichael Thx for the quick reply. How did you take the adapter apart to clean it? Is the turning part screwed on? I would buy another adapter, but at $30 they are not cheap for what you get.
@@tyyg9469 I used Spray silicone to lube it and locked and unlocked the adapter several time before putting it on a tool I also checked the tool dust port to see if there was a seam that was to high and when I bought these adapters they were only 12 bucks so that was my I said buy a few more didn't realize they went so high up in price
Good video. I was checking up on you again and saw that TH-cam took me off as a subscriber. I was wondering why I hadn’t seen a new video in a while
TH-cam Removes Subscriber's if there not active on the channel @Everyday Journey
It’s only been a couple of weeks. It shouldn’t do it that quick
@@everydayjourney301 I haven't seen you on the channel in well over a year but okay bro
@@everydayjourney301 hope your well
Pain in the ass!
I was struggling to figure out how this worked adapting to my 1-1/4" hose. Didn't realize about the inside threads. Thanks for showing me the light!
I'm glad the Video was helpful And You learned more about the hose adapter @Robh
I have never in my life seen someone attach something, pull on it to the point that their hands shake to make sure it is secure, but then say it isn't securing simply because there isn't an audible click.
I had to send this adapter back because 1 of them was faulty and wouldn't engage the ball bearings at all and the other worked fine there is suppose to be a audible clank sound from the 3 ball bearings locking into place.. I didn't say it wasn't secure because of the audio sound was missing i said it wasnt secure because it wasnt secure @Marknalley7177