Great question! We do not recommend running the pump at 100% all the time due to the risk of damaging the pump and controller. Our controller does not require a PWM signal because it comes with a two-speed controller that can operate off an RPM switch, Hobbs switch, or any switch or output that can ground the white wire. For further questions, please reach out to our tech staff at techsupport@deatschwerks.com.
@@dutnu2339that would depend on the rest of the fuel system...but if you had an AN10 feed line, the specs indicate it would flow enough for 8-900 rwhp assuming you have the injectors to support that
Can this be wired to run at 100% all the time for vehicles without pwm?
Great question! We do not recommend running the pump at 100% all the time due to the risk of damaging the pump and controller. Our controller does not require a PWM signal because it comes with a two-speed controller that can operate off an RPM switch, Hobbs switch, or any switch or output that can ground the white wire. For further questions, please reach out to our tech staff at techsupport@deatschwerks.com.
How much hp can this support?
@@dutnu2339that would depend on the rest of the fuel system...but if you had an AN10 feed line, the specs indicate it would flow enough for 8-900 rwhp assuming you have the injectors to support that