When I pressed the home button and power button, it always go to 7 px Home Screen. Didn’t update the new firmware that I put on dd card . Tried many times press home button and power button but never update the transmitter? Can you please help me? Thank you 🙏
Have you made sure that the micro SD card is not too big and formatted properly? You need to just copy the full FUTABA folder into the root directory of the SD card.
The E version of the receiver indicates "Electric only" They are not recommended for any gas/nitro vehicle. Often times, it will look as if the antenna is short, or it might not even have an antenna.
I believe that as long as you have the radio connected to the sbus port of the receiver, you can use power from the esc and have everything plugged in while you do the update. It does take a few minutes to complete, so keep that in mind. The important part to remember is putting the receiver into programming mode.
@@yadmah ok thanks for the reply, I definitely have the receiver in program mode, I got a new computer recently and tbh I just don’t know how to use it so the whole computer side of the process is giving me a real hard time
I'm not sure about that. I did a quick glance over the 4pm manual and I'm not seeing it there or mention of being able to use the 4pm to upgrade the firmware. The instructions for the v5 firmware for the rs334 receiver does not mention any instructions for the 4pm either.
As of now, I don't think so. Really if you are using any sbus features, then the minimum version is 4. The radio has a few features added, but nothing that would really affect the performance. Minimum version for the radio is 7.0 though.
The key is making sure the file structure is exact. Sometimes it takes a few tries. What transmitter are you using? If it's a 4pm. I haven't tried with it. I know on on my 4pm I couldn't even update it from the version 4.00 firmware.
Thank you for taking the time to make this video.
Thanks for your tutorial
Thank you
When I pressed the home button and power button, it always go to 7 px Home Screen. Didn’t update the new firmware that I put on dd card . Tried many times press home button and power button but never update the transmitter?
Can you please help me? Thank you 🙏
Have you made sure that the micro SD card is not too big and formatted properly?
You need to just copy the full FUTABA folder into the root directory of the SD card.
@@yadmah I downloaded software from futaba, copied it to the sd card . Should I unzip the file? Or just copy and paste?
Thank you for the help
@@JAM-vu3ol unzip and copy the futaba folder to the SD card.
👍
What’s the differance in E version of receiver?
The E version of the receiver indicates "Electric only" They are not recommended for any gas/nitro vehicle. Often times, it will look as if the antenna is short, or it might not even have an antenna.
@@yadmah Thank you for this info.
hello...language have chinese??
Do you have to unplug the receiver from everything or can I leave it on the car with the esc, gyro etc plugged in?
I believe that as long as you have the radio connected to the sbus port of the receiver, you can use power from the esc and have everything plugged in while you do the update. It does take a few minutes to complete, so keep that in mind. The important part to remember is putting the receiver into programming mode.
@@yadmah ok thanks for the reply, I definitely have the receiver in program mode, I got a new computer recently and tbh I just don’t know how to use it so the whole computer side of the process is giving me a real hard time
Does this work for the 4pm
I'm not sure about that. I did a quick glance over the 4pm manual and I'm not seeing it there or mention of being able to use the 4pm to upgrade the firmware. The instructions for the v5 firmware for the rs334 receiver does not mention any instructions for the 4pm either.
I keep getting error receiver is not connected
Hey, Are you making sure that you're getting the receiver into the program mode?
@@yadmah yes, both lights are on when i attempt to update
@@MVTTPis the receiver firmware in the correct folder on the SD card? Also what receiver and radio are you using?
@@yadmah I added the FILES folder to the update folder same structure you showed, im using a 7pxR with r334sbs-e
Do you the benefits of updating the receiver?
As of now, I don't think so. Really if you are using any sbus features, then the minimum version is 4. The radio has a few features added, but nothing that would really affect the performance. Minimum version for the radio is 7.0 though.
hi, when i try updating the receiver, i keep getting file not found on the transmitter, would you happen to know why?
The key is making sure the file structure is exact. Sometimes it takes a few tries. What transmitter are you using? If it's a 4pm. I haven't tried with it. I know on on my 4pm I couldn't even update it from the version 4.00 firmware.
@@yadmah I have a 7px
@@yadmah and by the way what part of the file do you transfer to the micro sd card?
@@YawMusic3 Hey, you'll want to copy the R334SBS.bin file to sd card. The File structure should look like FUTABA->UPDATE->FILES->R334SBS.bin
@@yadmah hey, on the online instructions for the receiver firmware update it says I may need a CIU3 usb drive 🤷♂️