Will need to make one.. 3metre 25mm water pipe. Two 19mm T piece joiners 1x19mm 150mm joiner Cut 4x 13.5cm lengths off of the 3metre pipe. Cut whats left in half Join legs and T piece together and DONE. Thanks mate, i made one for my double swag ive had since 2010. Works perfect. Cheers 🍻. Packs up inside the swag too. Can pin this post 🤙
Thanks for your idea and video. A good cheap fix... My swag is a DUNE but the problem is the same... it's a pity the manufacturers didn't put a bit more effort into sorting it out.
That’s awesome mate! Yeah I had looked at quite a lot of videos looking for an easy cheap fix but I also wanted something that will fit in the swag when I pack it up. Works a treat!
Could you add a link for the poly pipe purchased? Looks like a great idea that I would like to try out. Could you also do a quick tutorial on making the ends and middle part of the hoop?
Thanks mate, Ill have to have a bit more of a hunt, got everything else sorted but couldn't suss that bit out, will try again on my next visit. Cheers!
![โฮ่ง! (SUGOI) - LYKN [ OFFICIAL MV ]](http://i.ytimg.com/vi/nFp4zjAARFs/mqdefault.jpg)
Will need to make one..
3metre 25mm water pipe.
Two 19mm T piece joiners
1x19mm 150mm joiner
Cut 4x 13.5cm lengths off of the 3metre pipe.
Cut whats left in half
Join legs and T piece together and DONE.
Thanks mate, i made one for my double swag ive had since 2010. Works perfect. Cheers 🍻. Packs up inside the swag too.
Can pin this post 🤙
Thanks for your idea and video. A good cheap fix... My swag is a DUNE but the problem is the same... it's a pity the manufacturers didn't put a bit more effort into sorting it out.
Nice one thanks. Yeah simple fix hey
Mate, you're fkn Legend. this fixed my Tigerz11 swag 100%...a little trimming to get the right lenght, but wow.. NO more sag in my swag...
That’s awesome mate! Yeah I had looked at quite a lot of videos looking for an easy cheap fix but I also wanted something that will fit in the swag when I pack it up. Works a treat!
@@Jasonracer it was like sleeping in a potatoe sack, now its the taj maswag.....
wish i could post a piccie or 2...again man thnx.
@@Jasonracermate, my next hack on this is to add a length of pvc conduit down the middle, tie the 2 hoops, then i can hang small led light.
Simple ideas 💡 the best and lightweight to well done 👍
Could you add a link for the poly pipe purchased? Looks like a great idea that I would like to try out. Could you also do a quick tutorial on making the ends and middle part of the hoop?
What length is each pipe please?
Also curious!!
Just measure it off the length of your outer supports. Then trim it until you are happy. I hope that helps
trial and erro, cut long and then trim, best way is to be in it to see how it all goes. todays effort took me about an hour.
Hey mate, what did you use for the joiner between the to lengths?
Cheers
Hey Brad. Just use a piece of pipe that is smaller in outer but thicker material
Thanks mate, Ill have to have a bit more of a hunt, got everything else sorted but couldn't suss that bit out, will try again on my next visit. Cheers!
What is the length of the pipe please
trial and error, cut long, then cut to suit..
😮