Ultimate Table Saw Out-Feed Table || Out-Feed Table Done Right
ฝัง
- เผยแพร่เมื่อ 4 พ.ย. 2021
- check out the Ultimate Table Saw Out-Feed Table || Out-Feed Table Done Right! To start comparing quotes and simplify insurance-buying, check out Policygenius policygenius.com/bourbonmoth. Thanks to Policygenius for sponsoring this video!
Merchandise & Plans: www.bourbonmoth.com
Out-Feed Table Plans: www.bourbonmoth.com/shop/p/ul...
Patreon Page: / bourbonmothwoodworking
Cameo: www.cameo.com/bourbonmoth
Instagram: / bourbonmoth
Links below to tools and supplies:
3M Cubitron Sandpaper: lddy.no/1hset
Blum Undermount Drawer Slides: www.rockler.com/blum-tandem-f...
Removable Caster Plates: www.rockler.com/rockler-quick...
Adjustable Feet: amzn.to/3GYMBSK
Plywood Carrier: amzn.to/3o1638r
Contact Cement: amzn.to/3q7odIt
Laminate Scorer: amzn.to/3ENgDql
Laminate Roller: amzn.to/3q9A48K
Laminate: amzn.to/3EMTEvJ
Woodpeckers Clamping Squares: amzn.to/2W63hV8
Counter Sink Bit: amzn.to/3kTShVh
Pocket Hole Jig: amzn.to/2WgEJsL
Eye Protection: amzn.to/3gIO4A5
Woodpeckers square: amzn.to/3q8XObc
Drill & Driver https: amzn.to/35zBfmz
ISOtunes Bluetooth Hearing Protection (10% off code- BOURBONMOTH10) bit.ly/BourbonMoth10
Bits & Bits Precision Cutting Tools (10% off code- BOURBONBITS)
bitsbits.com/ref/6220/
RZ Mask (15% off code: BOURBONMOTH15)
www.awin1.com/cread.php?awinmi...
Total Boat Epoxy: www.totalboat.com/bourbonmoth...
Nicks Handmade Boots: bit.ly/3vZ8uMR
Firm Grip Work Gloves: thd.co/3LEO5TE
PowerPro Fasteners: amzn.to/3u3Mgtj
Pony Jorgensen Clamps: bit.ly/3knr9fZ
Spec Ops Hammer: amzn.to/3fMjAOd
Spec Ops Tape Measure: amzn.to/3w1M788
Spec Ops Pry Bar: amzn.to/2Ro3iC2
Spec Ops Chisels: amzn.to/3ga8kKv
Spec Ops Screw Drivers: amzn.to/3ciV8ls
Spec ops utility Knife: amzn.to/3g5ysWZ
Grizzly Tools:
Table Saw: amzn.to/3q8Wbu6
Jointer: amzn.to/3gFHE6a
Planer: amzn.to/3xCzH7r
Dust Collector: amzn.to/35AFEWw
Air Filtration: amzn.to/3zyXXsK
Band Saw: amzn.to/3gEtCAm
Drill Press: amzn.to/3xvhxEh
Lathe: amzn.to/3vChWUb - แนวปฏิบัติและการใช้ชีวิต
To start comparing quotes and simplify insurance-buying, check out Policygenius policygenius.com/bourbonmoth. Thanks to Policygenius for sponsoring this video!
Tell he foreman he is doing a great job making sure you keep working!
@@local.gay.writer pp
I'm sure you'll tell me about it later
in future videos can you say the priceyou paid for the material and the date when it was bought.?
Could you have put the casters facing inward on the adjacent corners of the legs so they aren't in the way but still able to serve the purpose?
This was perfect as a vanity desk for me. th-cam.com/users/postUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
Awesome book that gives you step-by-step photos th-cam.com/users/postUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt and directions to make every day project. I can see myself making a few of these projects and giving them as housewarming and holiday gifts!
You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice th-cam.com/users/postUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.
glad to see the Foreman finally started using tools to help out, it's great to spend time with Dad and learn a trade, even if he doesn't go that route in life, the memories and skill won't go to waste
Yeah, it’s crazy how much I subconsciously absorbed from just helping my grandpa out as a kid (most of the time not by choice, lol). Mechanics, carpentry, plumbing, etc.- extremely appreciative now as a adult homeowner. I wish that old, grumpy b*stard was still around so I could thank him.
That's a hell of an outfeed table. My wife would be having me installing that for the kitchen island!
I was thinking the same. Perfect kitchen island!
put a mattress on top, and a recliner on the side, and there'd still be a path thru my apartment
Shhhhhh!!!! My wife may be listening!!!
@@richardbaumia359 😅
Damn those Harbor Freight table saws are getting nicer and nicer
You, sir, are the Bob Ross of woodworking. So relaxing and enjoyable to watch.
happy, little table!
I'd say he's a nice combo of Bob Ross and Ryan Reynolds Dead Pool character.
That is one sexy table, nice job. Just don’t let your foreman know about that hiding place, you’ll be fighting for who gets to use it. God bless and keep making sawdust.
Clickbait. There is no tiny man.
Darn it 😫 only reason I clicked the video 😔
I thought it was the workshop of a giant
I was also hoping for him to continue sliding off the table. Intense disappointment.
@@jbbresers 🤣🤣🤣
🤣🤣🤣
Out feed tables dont get much better than that. Nicely Done. 🇨🇦
So glad you covered up the brand name of the table SAW because it totally STOPped me from knowing the manufacturer.
By far, the foreman stole the show! Great table build!
Always nice to see kids being involved and spending time with their parents
agreed, but please make him wear safety glasses(when puching wood through the planer etc). He doesn't know any better but you do. Love everything else as usual...Awesome video as usual
I am not a wood worker nor do I aspire to be. I find your channel entertaining. I especially love your sense of humor. The occasional appearances by the Foreman and the Supervisor are adorably-perfect little moments so that they don't distract from you and your work. I also like how you are able to roll with the punches and correct uh-ohs on the fly; you are clever in that way. That out-feed table has GOT to be the fanciest one of those ever made! It could easily be someone's kitchen island. The hidey hole is perfect for hiding gifts and surprises from family. Great work. Great channel. Great human!
Nice job happy to see you have a little child who you can teach
That is absolutely beautiful. I could see that as a kitchen island. I wish I had the skills to make it. Someday!!
I pressed play and "in no time" I have learned how to make a perfect out feed table for a harbor freight table saw! Love the vid Jason, thanks for sharing.
I was thinking an “... and in no time...” T shirt was in order.
@@jeremyspecce if only Jason had a way to make shirts....like he does with furniture! Lol.
Not gonna lie, I've seen a huge amount of outfield tables and assembly tables and all that noise.
That is genuinely the nicest looking outfield I have ever seen. Absolutely beautiful
I wish I had so much scrap pieces of baltic birch plywood laying around my shop lol..
One heck of a saw from Harbor Freight brother!
Love the “harbor freight” homemade sticker on your TS. 😂
Very well done video and project. 👍🏽
G'day from Australia! We always watch your videos as a family, as we are getting into woodworking and our two kids love to help. It was fantastic to see your son helping and this really reflected what our kids do too.
The other thing we really appreciate is that you include the mistakes in your video cut. It would be easy to leave those out. But it is so important to see a professional like yourself leave them in and then talk about how to problem solve your way out of it.
Awesome work mate, keep up the great work! You are doing so many things right when our four year old asks "Is there a new Bourbanmoth video out yet? He's so funny!"
Now that's a proper coffee table. Outfeed table, I mean!
that is actually a beautiful piece of furnature
I'm so glad to see you built the outfeed table. Now your work and your back (and of course the foreman who will have a nice place to sit and watch you work) will be happy. Looking good. Keep up the good work. Love watching your vids. When I see a new one is posted I scream, "HEY. JASON GOT A NEW VID" to which there is no one here to hear it so I just scream to myself...lol.
The absolute best video ever because...you have your own micro “hide-out fort” built into your out-feed table. It’s so fun to still feel like a kid at 60. P.S. Ya gotta watch video to the end to enjoy.
The Bob Ross of cabinetry!!! Beautiful! Fun! Educational! Thank You!
That harbor freight tag was the best. Informative video with such a function table. Ever heard of an air sled for moving heavy stuff? We used one to move a dentist chair on a remodel..super hand if there is a flat bottom surface. Or put it on plywood and put the sleds under that
Honestly so happy you posted! I've been sick for the past week and *may* have watched all your other videos 😅
Another brilliant piece, thank you. Also good to see the foreman again - well done team 👍
That's a mighty fine Harbor Freight saw you got there.
Your little boy is growing FAST. So cute ♡
Love that Harbor Freight table saw and the outfeed table is 101% perfect, the extra 1% being awarded for running those MDF strips across the length of the top. Obviously you designed that to give adequate support under the miter slots at the edge and bind together the seam in the subtop. It was nice of you to pretend to have made a mistake though. Makes the rest of us feel better.
That is a Sawstop table saw, not Harbor Freight
Edit: I am stupid
@@vmskgskgsjgskgxgk Naw, can't be. I have a CNS in my home shop and an ICS in my school shop so I KNOW what a SawStop looks like! That Glorious Electric Green decal with Harbor Freight so beautifully scripted couldn't possibly be mistaken for SawStop's unique livery. It takes true graphic art skilz to print a professional looking decal like that. Can you imagine the work that when into making it look hand made from Frog Tape and Magic marker? SKILZ I'm telling you, serious SKILZ!
@@vmskgskgsjgskgxgk definitely a Harbor Freight saw. says so right on the front
35:27 if anyone else missed it 👌🏻😉
This might be the nicest looking outfeed table I’ve yet seen. Great job on the design and the build!
That kid of yours is gonna have your sense of humour.
Kinda cute.
And I suppose you could size this to be a pretty sturdy island bench too.
Thanks Jason.
Boy you gotta love that harbor freight table saw he's rocking
Your new outfeed table looks to be about half the square footage of my entire shop. Great build and video production!
That’s a hell of a outfeed table and I absolutely love it! Totally look up to you and hope one day to get where you are in your field.
I've watched this video several times now, this time I noticed the DIY harbor freight name plate on the " nearly impossible to cut fingers off " tablesaw. I love it, LOL
I can't wait till my boy is old enough to actually do stuff in the shop. Right now he likes to just take sanding blocks to my bench legs while I work, but we're getting there.
Love the drawer face install, perfect install and HUGE time saver. Something so simple, thanks for adding hours on to my life! 😌
As a traditional carpenter, I've absolutely no need to watch your channel for educational value, but I watch you religiously for only two reasons: 1) You're an awesome dad, and as a dad and granddad, myself, I really appreciate fellow dads, who truly love and appreciate their children. 2) Dude, you're funny. You've got a great sense of humor, and you make watching woodworking techniques I've studied and used for over 30 years actually entertaining, rather than feeling like junior high shop class the way 95% of woodworking DIY shows/channels do.
I love when "The Forman" stops by. Great video and awesome outfeed table.
That is a really nice Harbor Freight table saw!
Absolutely love all your work. It's amazing 😍
Those casters are amazing! They're exactly the thing that I was looking for to put on a moderately-sized workshed that might need to be moved away from a fence!
LOL at the Harbor Freight label taped over the actual manufacturers label. Well played.
WOW, I am so jealous!! Great looking outfeed/assembly table. Will be looking for the plans for sure.David
For me it's the hideout. Absolutely love it. The table itself looks amazing 👏
This is just amazing...I wish I was this good at wood working lol. Very functional and well done Jason!
Is that your son? A good looking, strapping lad! It’s really cool that you are teaching him (letting him help) starting out while he’s young. Great parenting, “Dad”!!! Keep it up!
It may just be an out feed table, but it’s beautiful enough to go in any home!
one of your best builds so far. Looks amazing, and I must say I'm really jealous.
Wow, that is one sweet piece of furnture for your table! It's quality furniture worthy for inside the home. Way to go!
Good to see the shop foreman putting in an honest day's work.
Hey guy! I hope you read the comments. You always make me laugh, your spectacular introductions. I envy the space you have for your carpentry. I wish I had the space you have available. Make a video describing your shop. In spite of your "clownery" I enjoy your videos. I always laughs at your introductions. If you are married I think your wife is as crazy as you or her life is miserable. Anyways I think you are a great carpenter and this comment is to let you know I{m an admirer of yours.
Keep on doing your videos with great ideas and jobs. From a Cuban from Miami, Fl.
Looks amazing! Feels weird to see something perfect like this knowing that I'm about to go build a planter box out of box store 2x4 and plywood.
Don't worry, everybody who's not a woodworker will still be super impressed by that. I speak from experience. Be proud of building anything at all!
There’s always the saying “form follows function” will make a more perfect design and use of materials. Or something lolz
This is the second time I have watched this video, and continue to be in awe of your skills and talent. You are a great woodworker. Thank you for sharing these fabulous projects with us.
I want that in my kitchen!! I sure would love having that much surface for rolling out my nut roll dough!!! And all those drawers, for baking supplies, would be my dream!!
Great outfeed table! You never could have done it without the foreman!!
Love it Jason. Wish I had room for an outfeed of that size, but gotta make due with a much smaller one in my shop. Hey a trick you may like (Just binge watched all your tips and trick videos recently.) when putting laminate on I use an extension cord looped back and forth across the table, as you pull it out the laminate falls right into place. Thanks for the great content.
Another thing that works are dowels
LOL @ the "Harbor Freight" relabeling of your table saw!
I have seen a couple of your videos. I think you are a fantastic craftsman, but your sense of humor is grating to say the least. Your boss on the other hand, he is hilarious.
love this project. I'll be stealing this framework design and making some mods to it. Instead of all the drawers I'll be adding more dust collection to the table and mounting 3 router lifts. Turning the outfeed table into my router station will help me better utilize shop space. Keep making great content.
I love how the foreman quickly runs around to the other side to catch the piece coming out of the side of the planer. I cannot imagine what this cost, but it is damn impressive.
I’m mad at you that this was good enough to make me buy the plans.
All along I felt this was a really solid build. Nothing amazing, but well thought out and executed.
Then you explained the cubby.
Transformative.
Cheers!
Great ideas in this outfeed table. The Rockler casters are awesome. I would have definitely gone to the ground with it though...one less place for dust to hide. And we always need more storage!
And what about an embedded router table? Or maybe a flip up oscillating spindle sander area? Or maybe a downdraft sanding area? Lots of surface area there.
I appreciate your use of the mitre saw! I come from a construction background and can never understand why so many woodworkers choose to cross cut timber on their table saws or break it down with a circular saw 🤯 Love your vids - keep them coming!
Answer is that most miter saw blades deflect when you’re using them. Especially on a sliding miter saw when the slide is fully extended. When that happens you don’t get as accurate of a cut. Not really a problem in construction, but for fine woodworking…every millimeter matters. He’s using a Festool, which is like the Rolls Royce of woodworking tools…so he can get away with using his miter saw for accurate cutting. Most of us can’t afford them, so we use our table saws with sleds to get really accurate cuts.
@@JasonBreslow Great explanation. Makes sense. But Most wood workers have table saws that cost $1000+. Sawstops, Laguna, etc, are all $3000+. They can likely afford a Festool or good Makita miter saw. But I get your explanation. Personally both my miter and table saw are both under 500 each. I personally love the miter with stops for multiple cuts. But I'm no wood worker. Just a pretty experienced garage worker. :)
Everything this chap makes is superb
I don’t know how you showed up in my feed, but I’m glad you did. This table is beautiful!
It would be cool to see lumber prices on your projects. Love the vids, keep them up
Bet this cost a small fortune when a simple 2x4 stud at Lowe's cost $4.25 per.
@@user-wq7jj9zr9r Agreed. I couldn't imagine spending the money on solid maple. But it sounds like it was sponsored so he probably didn't spend a cent on it. It's a gorgeous table and would love to have the money to build it. I'll go find some pine :)
"doesn't need to be too fancy, it's just an outfeed table" as he builds the frame out of solid maple 😂
I suppose you'd use pallet wood. I see nothing wrong with maple.
@@Joesmith-fu4ps 😆 no I'd go with 2-bys and plywood. I'm not saying the maple doesn't look good, it looks great, but it's definitely fancy for just a workshop table
I wish I had seen this video before yesterday. I literally just flipped my 4x8 table over to cut 4" off the legs to add casters on the bottom. Had I seen this video earlier I would have used the same solution as you for the casters.
13:42 'Dont need to be too fancy, it's an outfeed table' ... ends up making the most fancy outfeed table I've ever seen.
Nice walkthrough! Would it be smart to substitute the frame for pine 2x4s instead to save on cost?
I was like “its a pretty cool outfeed table but thats just it” but then he introduced the “wife-away” hiding spot and I was mind blown as I desperately held down my immense desire to have my own “wife-away” hiding spot outfeed table lol
@17:30 Its amazing how much resistance safety glasses provide when you are using a nailer and shit hits the fan. I can promise with 100% confidence that your eyeball stands 0% chance; Mr Snow.
Great shop addition! Will definitely add this. Thanks for sharing your project
"Actually, James Dean is dead. I bet he does not look crisp or clean by now."
😂😂😂
"Maple" "outfeed table" makes me hate my wood choices for the vanities I built. lol
Nicest Harbor Freight table saw I’ve seen by a long shot
Great project. Always enjoy watching.
What happened? Saw stop wouldn't pony up any cash so you covered the logo on the saw? Lol
Wait.... what happened to the old saw and out-feed table?!? Unless I'm miss-remembering, but I thought you had a Grizzly with an out-feed?
I have subscribed, but I’ll have to resist binge watching your stuff. I just take them as show up in my recommendations. Your video and presentation style is perfect. Not too wordy, but with just enough detail. The shop Forman looks tough. I hope he keeps you around long enough to create more great content.
Love your new Harbor Freight table saw!
how do you guys afford to use baltic birch for everything??? its like $130 per sheet here in Iowa! Jeesh
So? That's the cost of woodworking
@@daveklein2826 a completely pointless response that neither answers my question or contributes to the discussion. Nice work. Trying peeing while standing up for a change, and your life might not be so miserable.
@@ShopTherapy623 want a little cheese to go with your whine?
@@daveklein2826 who’s whining? I simply asked a question……
Bro... The Harbor Freight sticker/tape at the end was priceless. Keep up the good work! Great video.
I’ve been watching you build for years,
Love the build
Of all the wood working vids this is definitely one of the more fun and entertaining
very nice Outfeild table a little note onthe Salt in the Woodworking shop is that over the years more specifically since the decrease in Lead Paint chips the salt makes the WoodGlues and other Adhesives taste better of course IMO the lead paint chips had the best flavour
I love seeing your son working with you. My best memories are with my uncle working on projects.
You must be rich ! Us poor folks use 2x4s and cheap plywood for shop furniture. Just teasin, nice table !!
I love the rebranding you did for your table saw...
Who are the people giving this a Thumbs Down? This is one of, if not the best builds I've seen. This is a piece of quality furniture not only an outfeed table. Love it.......Great job.
Loving the green tape with Harbor Freight
I enjoy and learn a lot watching your videos. I like your style. Greetings!
That patented technic made me a subscriber.