Your loop is amazing! I worked all over Europe with great reports using 5 watts not even 5 minutes after setting it up. Compliments for a GREAT product. Using it with an ICOM 705 and after tuning it correctly using only 5 watts I got S7 to S9 reports from stations 2000 and 3000 kilometers away. What is also great that by simply turning the loop you can perfectly align it towards the station you want to work. Nulling out other stations easily to improve reception of the station you want to work.
Thank you very much for your positive feedback and experience with this Magloop antenna! 😉👍 I am so happy that you like it and enjoy it. I hope to ork you one day in the future on the bands! 👋🙂 Best 73! Paul
Many thanks, Paul. Had one of your loops for a while now and love it. Loads of contacts QRP with just 5 watts with the Xiegu 5105 just from my shack! Semi disabled so hard to get out into countryside like your wonderful area where you live. 73's Charlie GM1VUT
You can also use a 4s battery with a load of large diodes in series to lower the voltage, however the diodes do heat up (when tx 100W), once the voltage drops low enough you can pull the diodes out of series. I used large square bolt down type rectifier diodes. You need to check the voltage spec of the radio and it's -+% tolerances to know what is possible or switch to LifePo4 or perhaps LTO cells. If you start to use those lipo cells in parallel you need to be cautious as one cell is always weaker than all the others. For this i would recommend an active balancer, i use the types made with inductors not the type with many capacitors as the inductor type is slightly more efficient. With the active balancer wired into the cells any stronger cells will prop up the weaker ones so that they all drop to 3V around the same time. If you let a weak cell drop below 3V and continue to use it it will die or loose a great deal of it's capacity very quickly.
I have to say, I have already built a loop like this myself and it actually worked. But my compliments, yours is really very nice and professionally built. However, I admit, I almost only do 5 watt FT8/4 QSOs or CW with my Xiegu 5105. SSB just annoys me. Best wishes, Tom
Good video Paul, I have been thinking about building a magnet loop antenna for a long time now but just haven’t the time to do the research needed to build the antenna. Very good video and 73 from Deep East Texas KV5P
One more question it looks like when in band you can listen to look for station then tune for transmit. Can you listen to the entire band? If yes, is it true for all bands? And what and where is this beautiful little town?
Yes, if you tune Magloop antenna in the middle of the band you can listen within whole band only with small attenuation on the edges. For transmitting you have to tune antenna every always for the lowest SWR(best efficiency). The name of our village is Nizny Hrusov.
Hi Paul, Some time ago you did a demonstration of the QRM Noise Canceller/illiminator, and you showed just how good it really was. I'm hearing a great deal of noise on your portable rig, so I'm surprised that you are not using it Paul. Would you please be so kind as to explain your reason for not having it, or even a separate one with u when you're out portable please Paul,, ,? ? ? Kind Regards, Ray, M0RAY, Sittingbourne , Kent, South East England.
Thanks. Here is explained the danger: www.hamradioandvision.com/small-loop-compliance-distance?fbclid=IwAR1JoS35G38IOROxMlV68i82Qja0IRvZccEHUuDYvVeTg1LreFU8oJPjqHI Capacitor rotor ratio is 1:3
Hi Paul! How are thinks? I hope well. It could be very interesting a comparison between the x5105 and the new x6100 using your magnetic loop antenna and in this form to be able to determine how well transmits and receives each of them. Greetings.
Hello Paul, Keep up the good work,..your magnetic loop is working fine in my x6100. Hope you can make something to increase the power to at least 100watts someday. Keep me update 73/kd6hup.
Excellente démonstration Paul avec cette Boucle très bien construite et réalisée. Une question/ Peut t'on utiliser cette antenne à l'intérieur du QRA? En te remerciant pour ta réponse. 73/F8MGW
QRP is a way of operating that involves using low power transmitters, that are no more than 5 Watts for Morse or data modes, or 10 Watts pep for voice.
![ไข้ขึ้นเลย! เมื่อแฝดโดนจัดเต็มวัคซีนครบ2เดือน🤒 [cc] แดนแพทตี้ SS2 | EP.54 |](http://i.ytimg.com/vi/z2VHItnyyvY/mqdefault.jpg)
Your loop is amazing! I worked all over Europe with great reports using 5 watts not even 5 minutes after setting it up. Compliments for a GREAT product. Using it with an ICOM 705 and after tuning it correctly using only 5 watts I got S7 to S9 reports from stations 2000 and 3000 kilometers away. What is also great that by simply turning the loop you can perfectly align it towards the station you want to work. Nulling out other stations easily to improve reception of the station you want to work.
Thank you very much for your positive feedback and experience with this Magloop antenna! 😉👍 I am so happy that you like it and enjoy it. I hope to ork you one day in the future on the bands! 👋🙂 Best 73! Paul
Many thanks, Paul. Had one of your loops for a while now and love it. Loads of contacts QRP with just 5 watts with the Xiegu 5105 just from my shack! Semi disabled so hard to get out into countryside like your wonderful area where you live. 73's Charlie GM1VUT
Hi Charlie, thank you so much for your satisfaction! 😊👍Your satisfaction is my satisfaction. Best 73, Paul
You can also use a 4s battery with a load of large diodes in series to lower the voltage, however the diodes do heat up (when tx 100W), once the voltage drops low enough you can pull the diodes out of series. I used large square bolt down type rectifier diodes. You need to check the voltage spec of the radio and it's -+% tolerances to know what is possible or switch to LifePo4 or perhaps LTO cells. If you start to use those lipo cells in parallel you need to be cautious as one cell is always weaker than all the others. For this i would recommend an active balancer, i use the types made with inductors not the type with many capacitors as the inductor type is slightly more efficient. With the active balancer wired into the cells any stronger cells will prop up the weaker ones so that they all drop to 3V around the same time. If you let a weak cell drop below 3V and continue to use it it will die or loose a great deal of it's capacity very quickly.
I have to say, I have already built a loop like this myself and it actually worked. But my compliments, yours is really very nice and professionally built. However, I admit, I almost only do 5 watt FT8/4 QSOs or CW with my Xiegu 5105. SSB just annoys me. Best wishes, Tom
Thanks Tom. I am also selling them here on my web site www.om0et.com Have fun with your Loop and 73! 😉👍
That's why I bought it from you yesterday haha
Aaah it's you "Kevin"!! 😀 hihi
😂😂😂
Good video Paul, I have been thinking about building a magnet loop antenna for a long time now but just haven’t the time to do the research needed to build the antenna. Very good video and 73 from Deep East Texas KV5P
Could I purchase the capacitance box and the connection for the tuning loop only from you - I prefer to make the rest
Pekné video Pavel. Ďakujem a teším sa na ďalšie!!! 73 de Imrich OM2WM
One more question it looks like when in band you can listen to look for station then tune for transmit. Can you listen to the entire band? If yes, is it true for all bands?
And what and where is this beautiful little town?
Yes, if you tune Magloop antenna in the middle of the band you can listen within whole band only with small attenuation on the edges. For transmitting you have to tune antenna every always for the lowest SWR(best efficiency). The name of our village is Nizny Hrusov.
Hi Paul,
Some time ago you did a demonstration of the QRM Noise Canceller/illiminator, and you showed just how good it really was. I'm hearing a great deal of noise on your portable rig, so I'm surprised that you are not using it Paul.
Would you please be so kind as to explain your reason for not having it, or even a separate one with u when you're out portable please Paul,, ,? ? ?
Kind Regards,
Ray,
M0RAY,
Sittingbourne , Kent,
South East England.
so great video CE7GFK, Gerardo from Chile south,73
Hey paul, the link in the description is dead ;).
Hello Paul!!! Could you tell me what is the diameter in centimeters of the Main Loop and also of the Coupling Loop, thank you in advance Paul 73
Great video, one question is being that close the the loop dangerous in terms of radiation?
Also, is the tuning knob a 6:1 ratio?
Thanks. Here is explained the danger: www.hamradioandvision.com/small-loop-compliance-distance?fbclid=IwAR1JoS35G38IOROxMlV68i82Qja0IRvZccEHUuDYvVeTg1LreFU8oJPjqHI
Capacitor rotor ratio is 1:3
Hi Paul! How are thinks? I hope well.
It could be very interesting a comparison between the x5105 and the new x6100 using your magnetic loop antenna and in this form to be able to determine how well transmits and receives each of them.
Greetings.
Good idea! Thanks 😉👍
G6LSW hi Paul, thankyou for nice QSO on 20 metres, Sunday best 73 alan
What about the extra loops on the feeding cable beneath the main loop?
Great video Paul
Thank you 😊
Hi Paul. May I use ATU with MLA? Thanks. Greetings from Brazil 73 PU2AOO
Super mam troche inny pomysł ale widze że warto tą antene przetestować.
Pozdrawiam.
SP9LS
Ten sprzęt to na legalu czy nie ?
Very good video, thanks!
Would love one of these for my G90 but I bet there expensive to post to UK!!
Thanks for your interest 😊 here in an order form you can find the shipping options with the prices www.om0et.com
Hello Paul, Keep up the good work,..your magnetic loop is working fine in my x6100. Hope you can make something to increase the power to at least 100watts someday. Keep me update 73/kd6hup.
Excellente démonstration Paul avec cette Boucle très bien construite et réalisée. Une question/ Peut t'on utiliser cette antenne à l'intérieur du QRA? En te remerciant pour ta réponse. 73/F8MGW
Nice! 👍
How is your loop only for RX, I'm an SWL. Thanks Bro 😍
It's perfect also for RX 😊👍
Do you have any drawing on this antenna??
Which frequency realm will be covered by your MLA?
It's 40/30/20/17/15/12/CB/10m bands. More details here: www.om0et.com
I own one, its brilliant !
Nice presentation tnx but how can I use it horizontal polarisation ?? 73 qro HB9GUR
Horizontal polarisation needs a good hight.
Great presentation video bro 👏 👌. Proud of you mate 👏 👍 PT
How much are you selling the xiegu5105
It is for 350€ + shipping
Your link in the description is dead!
Oh you are right! 😲 here is the good one 😉👍 om0et.com/ultralight-mla-mc-20.html
I also repaired link in the video description. Thanks for info 👍👍
Hello, how to buy this antenna
🙂 Here on my website: www.om0et.com
basarili bir uygulama. bende mobil tasinabilir m. loop anten yapmaliyim. TA5ME TÜRKİYE 73
I imagine yours is better than the 20a loops on ebay (yours is 2-3x more expensive) but can you explain what makes it better?
Your English is good, how to you learning English ?
Thank you. I am just a self-learner and my "teacher" was mostly radio, movies and internet 🙂👍
@@OM0ET hihi. I'm learning English, listen skill so hard. But you say slow i can hear you.
Great presentation!! 73 KE8SDS
10 w is not qrp you punch!
Please read ARRL book carefully mate 😉
@@OM0ETapologize, thought you living in europe 🙂
Europe, USA, it doesn't matter...
@@OM0ETread iaru guidline, guess you read uncomprehendingly, let someone translate for you! arrl is`nt an executive authority!
QRP is a way of operating that involves using low power transmitters, that are no more than 5 Watts for Morse or data modes, or 10 Watts pep for voice.
Nice and informative video about magnetic loop antenna. What is the maximum range in an ideal propagation day. de 4F1KYW
Thabk you! 😉 A few days ago I had 8500km contact from Slovakia to Brasil
O M 0 E T 🇧🇷. by PU7SEL 👏
Nice presentation tnx but how can I use it horizontal polarisation ?? 73 qro HB9GUR
Hi Phillipe. Horizontal polarization is recommendet only if your antenna has a good elevation, othwrwise the gain will significantly drop.
@@OM0ET TNX have a nice week 73 HB9GUR
@@OM0ET ok tnx for your answer, but what is the minimum elevation to be used?? 73 qro Phil HB9GUR
Great presentation video bro 👏 👌. Proud of you mate 👏 👍 PT