Interesting! I'm waiting for the test results! Seems there is not any kind of matching circuit/antenna link like the most of the loop antennas have. But hold on, the video is uploaded just 4 days ago!
Many thanks for sharing this project. I made a frame receiving antenna similiar to this one. But it had 2x uprights and 2 x horizontal supports so the frame looked like a noughts and crosses game shape. Supports were hardwood and had many more turns. No capacitor or wire taps. The design was based on a mw/lw design from the 1940 s with many turns of thin wire. Hours to make. Excellent Receiver aerial. Major problem was the wires expanded and shrank with age and temperature. The wood supports was supposed to expand and contract at a different rate to compensate but didn't. The wire was bare with no insulation so shorted out . I cannot remember what I did with it as it was over 30 years ago. I think it was around 6ft diameter. Cheers from old George. Looking fwd to see the tests under tx.
EXCELLENT JOB! I know English is not your native language and you still did a great job with your explanations. Just for your reference, when you say "winding" it is pronounced "Whyn-ding", or "Wine-ding". What you are saying is "wind-ing", as in a breeze outside. We all knew what you were trying to say, but I wish that when I was learning a 2nd language someone would have helped me with these little things. The more little things you know the more it sounds like you're a native speaker. You've heard of the adage, "The devil is in the details"... well, that is also true with language 🙂 GREAT JOB!!!!!!!!
Looking foward for the second part, too! Very interesting build. I also practice QRP only, so in the winter I need some equipment to operate from my flat! Please show how your frame antenna is actually working before the end of new year's holidays, when there is stil time to try buiding one... 🙂
Привет дружище. Думаю эта антенна должна хоро работать на приём, но, на передачу видимо, только в режиме QRP., для максимальной мощности неполучится, имею ввиду P=100 и более ватт. Подобное делал на 1000-1500кгц давно когда-то в 70г.г.успехов, здоровья старина. SK 73!!!
I built one of these in anticipation of the next video hoping to compare experience... I haven't fully tested mine because I'm waiting for a box for the variable capacitor. While wiring it up, I had a really hard time with it - imagine my surprise when I cut the wire at the end and realized it was solid instead of stranded. :facepalm: Hopefully it'll work ok! Really looking forward to part 2!
Excellent work. Your precision is outstanding. Attention to detail is a mark of a man who produces exact pieces. Waiting and looking for part #2. W0YVY
Excellent and simple description of construction, in clear English my dear. Also i noticed a careful and accurate work. I wish you success on everything you do. Thanks a lot. My 73s, from Cyprus (5B4ER).
I believe this is just what i am looking for, Small, Apartment Ready and Multi band !! Your Part 2 will be my deciding factor, Thanks again 73's VE2TSM
Good video. There's a pipe connector called a "cross." It will simplify assembly and at the same time align all the pipes without any offset. The offset won't matter for performance, it will just simplify construction and allow the antenna to be constructed a little quicker.
Ahoj Pal´o, Another of your interesting videos. I will find some interesting detail in each of them. This time I was fascinated by the measuring jig. Simple and clever. Thanks and I am looking forward to the result. Merry Christmas and good health + many new ideas in the new year. 73! ok2hby
Yes they work well. Cap size in the design was 200 pf. Power handling depends on the capacitor spacing. Vacuum capacitors are recommended for higher power output. The downside is if you change frequency you must retune it. They do have a good null therefore good noise reduction. Caution is advised with magnetic loops as the voltage induced on the outer loop can be lethal depending on your transmitter power.
Super construction. I'm going to give this antenna try in the new year. To help seal the shrink tube use a hairdryer or heat gun as flame can burn holes in the tubing giving no chance of being able to put another piece on. Additionally. If you have no lock nuts you can use the wife's old nail polish and put a line down the bolt thread then a blob on the end of the nut. Oxydisation between aluminium/aluminium or copper/copper/alumunium you can use an anti seize compound called copper slip. De Dave M1BTI
Hello, Paul, friend! Not a bad construction, but what about wind load or you will use this tool inside only? I am afraid you had better to streghten it otherwise.
I really applaud you for what you have done. It is a great job. Thank you for the effort you made five weeks ago. I have been following the videos about the best way to make an antenna and I found that what you have done is really the best. It is the first video I watched with this clarity and quality in work and the explanation of everything you do I also have a question about the cleanliness and arrangement. Can I replace the coiled wire system with a ferrite shaft, and how will this be done if it is possible to replace it?
If the drawing calls for 200 pf and the configuration of your is 180 divided by 2 or 90 pf, Considerably short of the 200 needed for 80 M. Of course you could add a fixed 100 pf on a switch to extend range. Also, the schematic shows the alligator clip at one turn, you have created the first tap at 0 turns, so your second tap will be at 1 turn. You could make winding easier by using a bit of math to figure out the center point of the coil, fold the wire in half, and wind both ways, such that you need not drag the entire length through all the holes.
That looks like a BCB capacitor with two identical sections. The two rotor sections are usually connected to the frame of the capacitor, and while two lugs are provided, they are actually connected together. Therefore you are using only ONE section of the capacitor, which is 180pf. The other section of the capacitor is NOT used, although you have made use of its rotor (ground frame) lug for greater spacing.
Hi! I'd like to make this for listen to 80 mt. I usually use a random wire antenna inside the house around the ceiling and the attic but it's much better to build a plastic tube frame so that we can change band with some crocodile contact 🥂🥂
Very nice, detailed video! I'm looking forward to see the next video! I like to build antennas myself, and your video's certainly help me with that! 73's PD4GB 😊👍
Tak tuhle jsem vyráběl asi před rokem :) Pořád nějak nejlíp funguje ten "ultralight design" od tebe. Ale co jsem zjistil, že ten funguje dobře i jako neladěná anténa, to znamená bez kondenzátoru. Sice tam není zisk, ale pro mý poslouchání v bytě docela dobrý. Zejména protože je směrová, takže se dá najít poloha s nejméně rušením.
jo a neladěná verze je bez sekundárního loopu(toho malýho) a je to připojený přímo na loop s balunem 1:1, respektive s balunem "binokulárním" při použití dvou feritových trubiček z VGA kabelu. Tuším 4 a 4 vinutí proti sobě.
Interesting project of short wave frame antenna. Is it OK to short circuit some turns to tune the antenna ? This produce a large attenuation of the signal. I would use the crocodile to select the usefull number of turns ans let the useless turns open.
Not sure if I understood the way this antenna is supposed to work. But wouldn't the crocodile clip, attached to any of the taps of the coil, result in a (partially) shorted loop which is closely coupled to the active part of the antenna, thus worsening the efficiency?
Same as in an l match tuner, the clip does short out or bypasses loops. This changes the coils inductance and therefore the resonant frequency of the tank circuit.
Great project. Why use solder on the connectors? Wouldn't crimp connectors have less resistance and therefore better performance? I understand the oxidation issue for the tap points.
Soldering like brazing requires the correct quality materials and proper skills. Solder bonds to the connector and conductor sealing out oxygen and moisture contamination. Coax shield can be soldered but requires a lot of skill to do it correctly every time. Therefore crimp type coax connectors are prefered by many. For and other connection I use crimp and solder both.
@@tedmead465 I learned crimps were electrically superior from a college professor. With that said context is frequently lost and facts get twisted. I would like to see throwdown between the two techniques across a wide variety of connectors and situations.
I think you should make some spreaders that keep the alignment of the wires uniform all the way around the antenna, You could #d print them or use some plastic with slots for each wire that snap into the seven wires to keep the spacing equal all way around.
To první zapojení s krkosvorkou je nějaké podezřelé, bo užitím té krkosvorky páchám závit(y) na krátko. Tohle už jsem viděla na špuli v jakémsi antenním tuneru, kde tím řešili napětí nakmitané na odpojeném konci špule, nicméně připadá mi to přinejmenším podezřelé. Druhá věc je JAK se má vlastně navrhovat rámová anténa. Totiž. Seriová kombinace LC určitě půjde dostat do rezonance, no a mohu-li měnit jak kapacitu, tak indukčnost, půjde to v rezonanci dostrkat i do těch 50Ω, otázkou však zůstává je-li to rozumné. Já se snažila navrhnout rámovou anténu na 1.2MHz, čili střední vlny, ptala jsem se na to různých lidí, dostalo se mi mraku různých rádioamatérských plánků, ale žádného jasného postupu návrhu. Nakonec jsem to udělala diletantsky tím způsobem, že jsem stvořila LC rezonanční obvod buzený pomocným vinutím krmeným přes balun 1:9, který jsem kdysi v minulosti sehnala v jakémsi čínském shopu a vím, že funguje (přesněji řečeno mám to změřené). Nejprve jsem dostala do rezonance hlavní LC obvod, posléze jsem šolicháním s počtem závitů (a vyšlo mi to na nějaký 1¼ závitu) pomocného vinutí trefovala 50Ω na vstupu balunu. Bohužel otázka je u tohoto postupu úplně stejná - je rozumné to takhle dělat? Vím, že to, co popisuji, nějak vysílá, ale to ještě neznamená, že je to navržené správně. Nejspíš není, protože opravdu nevím jak se to má dělat.
Hello ...I have another much simpler way of attaching the two cross pvc tubes together ....notch roundly, the vertical tube i/4" in the middle and using a heavy duty PVC Cement, glue the two together. The pvc can be purchased in three grades of adhesion strengths, light, medium, and high contact industrial. once set it will be like one solid piece. without screws or bolts and when the loop windings are applied the antenna will be even stronger.
I wonder if the dead end effect is going to play a role in sapping away the effective power on transmission the way it does for variable inductors like crystal radios.
Только перед началом "прокладки" кабелька, надо приготовить клеющий пистолет. Продёрнул кабелёк и тут же клеем закрепил к пластиковой трубке - клей остывает быстро. И как результат, кабелёк будет чуточку натянут, а главное расстояние между линиями полотна антенны будет идеально ровное - красота великая сила! У меня очень плохо с "аглицким". Хотелось бы знать как рассчитать длину кабеля?
@@victora.prokopenko6121 длина кабеля рассчитывается также, как и антенна, и умножить на коэффициент укорочения где-то 0,66., желательно, по характеристике волнового сопротивления кабеля.
Thanks a lot for this video, Paul! I´m very upset to see how it works with the Xiegu. Got my transceiver yesterday but will unpack it not before next week at x-mas day 🙂 If the frame-antenna will work, I´ll build one also. So I´m hopefully looking forward for what You will tell us in your next video... Merry X-Mas!
Hi Paul.....This looks great, love your videos and always pick up a tip or two, can't wait to see your results with this one, have a great Xmas and super 2022 Paul, GM0EDJ
Looking forward to the second part!
Interesting!
I'm waiting for the test results!
Seems there is not any kind of matching circuit/antenna link like the most of the loop antennas have.
But hold on, the video is uploaded just 4 days ago!
Great project for the ones who have an XLY who hates antennas. This is small and I bet it works perfectly. Thanks for sharing!!!
I am joining to the people who love you videos, they are not only very detailed, but also create very kind field for watchers.
Beautiful work, and also inspiring to watch for yours truly. Thank you for sharing this creation.
Many thanks for sharing this project. I made a frame receiving antenna similiar to this one. But it had 2x uprights and 2 x horizontal supports so the frame looked like a noughts and crosses game shape. Supports were hardwood and had many more turns. No capacitor or wire taps. The design was based on a mw/lw design from the 1940 s with many turns of thin wire. Hours to make. Excellent Receiver aerial. Major problem was the wires expanded and shrank with age and temperature. The wood supports was supposed to expand and contract at a different rate to compensate but didn't. The wire was bare with no insulation so shorted out . I cannot remember what I did with it as it was over 30 years ago. I think it was around 6ft diameter. Cheers from old George. Looking fwd to see the tests under tx.
Молодец, Джордж! Настоящий штормовой парень!
EXCELLENT JOB! I know English is not your native language and you still did a great job with your explanations. Just for your reference, when you say "winding" it is pronounced "Whyn-ding", or "Wine-ding". What you are saying is "wind-ing", as in a breeze outside. We all knew what you were trying to say, but I wish that when I was learning a 2nd language someone would have helped me with these little things. The more little things you know the more it sounds like you're a native speaker. You've heard of the adage, "The devil is in the details"... well, that is also true with language 🙂 GREAT JOB!!!!!!!!
Thank you for this video, with this I was able to get my first car... Very happy 😊😊
Looking foward for the second part, too! Very interesting build. I also practice QRP only, so in the winter I need some equipment to operate from my flat! Please show how your frame antenna is actually working before the end of new year's holidays, when there is stil time to try buiding one... 🙂
Привет дружище. Думаю эта антенна должна хоро работать на приём, но, на передачу видимо, только в режиме QRP., для максимальной мощности неполучится, имею ввиду P=100 и более ватт. Подобное делал на 1000-1500кгц давно когда-то в 70г.г.успехов, здоровья старина. SK 73!!!
Nice extensive work 👍
Looking for part 2 as well
I built one of these in anticipation of the next video hoping to compare experience... I haven't fully tested mine because I'm waiting for a box for the variable capacitor.
While wiring it up, I had a really hard time with it - imagine my surprise when I cut the wire at the end and realized it was solid instead of stranded. :facepalm: Hopefully it'll work ok! Really looking forward to part 2!
Excellent work. Your precision is outstanding. Attention to detail is a mark of a man who produces exact pieces. Waiting and looking for part #2. W0YVY
I agree. I am a novice at these
things, but I think I will aspire to be as neat and meticulous. Impressive.
Excellent and simple description of construction, in clear English my dear. Also i noticed a careful and accurate work. I wish you success on everything you do. Thanks a lot. My 73s, from Cyprus (5B4ER).
Paul, thanks for sharing. Nice detail on construction. Very curious to see what the antenna analyser shows and how it works on air.
I agree! Please test it on VNA and on air!
Melhor passo a passo que já vi, parabéns !
Very skilled workmanship!
The alligator clip moment at 54:05 alone is worth the price of admission! Another cool video, Paul...thank you and 73! de WX0V
Looking great, very beautiful antena.
Very instructive! Thanks! I can' hardly wait to see your video testing this antenna!
I believe this is just what i am looking for, Small, Apartment Ready and Multi band !! Your Part 2 will be my deciding factor, Thanks again 73's VE2TSM
Good video. There's a pipe connector called a "cross." It will simplify assembly and at the same time align all the pipes without any offset. The offset won't matter for performance, it will just simplify construction and allow the antenna to be constructed a little quicker.
Can't wait for the second part. Thanks for such a detailed video.
Ahoj Pal´o, Another of your interesting videos. I will find some interesting detail in each of them. This time I was fascinated by the measuring jig. Simple and clever. Thanks and I am looking forward to the result. Merry Christmas and good health + many new ideas in the new year. 73! ok2hby
Nice build, Paul - looking forward to your report about the antenna performance.
Good to follow your build, thanks for the video. I'll look out for part two now.
Nice job! Or, as you said, “not bad”!
But does it work?? Power handling? Good video but won’t build until I see your assessment of it. Thanks!
Yes they work well. Cap size in the design was 200 pf.
Power handling depends on the capacitor spacing.
Vacuum capacitors are recommended for higher power output.
The downside is if you change frequency you must retune it.
They do have a good null therefore good noise reduction.
Caution is advised with magnetic loops as the voltage induced on the outer loop can be lethal depending on your transmitter power.
Very nice Paul! It wil be interesting to see how it works. 73
Nice build hope it works as good as it looks.
Super construction. I'm going to give this antenna try in the new year. To help seal the shrink tube use a hairdryer or heat gun as flame can burn holes in the tubing giving no chance of being able to put another piece on. Additionally. If you have no lock nuts you can use the wife's old nail polish and put a line down the bolt thread then a blob on the end of the nut. Oxydisation between aluminium/aluminium or copper/copper/alumunium you can use an anti seize compound called copper slip.
De Dave M1BTI
I'm very interested in this antenna, how did part 2 turn out? A lot of people would like to know.
good idea, we need to check it out!
Great video ..... waiting for the part 2 .... how this antenna performs on those bands ??
73, Fabio IZ0IBA
Do you think it is possible to make this antenna work for TV service that is used in the USA ??? Thanks
Nice project but did it work? Can't find the second video.
Hello, Paul, friend! Not a bad construction, but what about wind load or you will use this tool inside only? I am afraid you had better to streghten it otherwise.
Well done, but does it work?
Grettings from Venezuela, this antenna looks pretty, but my question is .... It`s for indoor use only? 73 of YV2ESB
Clean build
Paul dzieki za interesujace video.Porzadna konstrukcja.Pozdrawiam Rysiek SP9DTI
I really applaud you for what you have done. It is a great job. Thank you for the effort you made five weeks ago. I have been following the videos about the best way to make an antenna and I found that what you have done is really the best. It is the first video I watched with this clarity and quality in work and the explanation of everything you do I also have a question about the cleanliness and arrangement. Can I replace the coiled wire system with a ferrite shaft, and how will this be done if it is possible to replace it?
Agreed! I have no immediate plans to build an antenna but this is an EXCELLENT video!
Waaay too many others that just zip right through a process.
Excellent comment Muhammed. This is the mark of a man who wants to help people learn. I am really impressed
If the drawing calls for 200 pf and the configuration of your is 180 divided by 2 or 90 pf, Considerably short of the 200 needed for 80 M. Of course you could add a fixed 100 pf on a switch to extend range. Also, the schematic shows the alligator clip at one turn, you have created the first tap at 0 turns, so your second tap will be at 1 turn. You could make winding easier by using a bit of math to figure out the center point of the coil, fold the wire in half, and wind both ways, such that you need not drag the entire length through all the holes.
Another fantastic project 0met you Numero 0ne
Like to see your work👍🇨🇦😎
Tell me what you have got the inductance values of the antenna taps for different ranges.
Hi Paul
Thanks for sharing this nice video and the effort. I can't wait to see the part II reception test.
73, cn8yr
Why not use a T for the center of the antenna frame?
Interesting Antenna, thx for sharing. Why didn't you put the capacitor knob on the bottom?
Thanks for the video. Just thought about similar project. Waiting for testing video!
Hi looks good wait for the TESTING have not found it yet if done did not see thanks very nice job
I'm looking forward to seeing how it performs. 🙂
That looks like a BCB capacitor with two identical sections. The two rotor sections are usually connected to the frame of the capacitor, and while two lugs are provided, they are actually connected together. Therefore you are using only ONE section of the capacitor, which is 180pf. The other section of the capacitor is NOT used, although you have made use of its rotor (ground frame) lug for greater spacing.
Hi! I'd like to make this for listen to 80 mt. I usually use a random wire antenna inside the house around the ceiling and the attic but it's much better to build a plastic tube frame so that we can change band with some crocodile contact 🥂🥂
Congratulations OM0ET !!! I'm looking forward PY3TAM's Field tests 73
Excelente trabajo
How many Pf has the capacitor?
When finding the wire a bit tight I'd go to the next larger drill bit and re-drill all the holes for the wire.
Very nice, detailed video! I'm looking forward to see the next video! I like to build antennas myself, and your video's certainly help me with that! 73's PD4GB 😊👍
Has the second part of the wire antenna uploaded
Tak tuhle jsem vyráběl asi před rokem :) Pořád nějak nejlíp funguje ten "ultralight design" od tebe. Ale co jsem zjistil, že ten funguje dobře i jako neladěná anténa, to znamená bez kondenzátoru. Sice tam není zisk, ale pro mý poslouchání v bytě docela dobrý. Zejména protože je směrová, takže se dá najít poloha s nejméně rušením.
jo a neladěná verze je bez sekundárního loopu(toho malýho) a je to připojený přímo na loop s balunem 1:1, respektive s balunem "binokulárním" při použití dvou feritových trubiček z VGA kabelu. Tuším 4 a 4 vinutí proti sobě.
Nice work 👍👍🎄🎄
Interesting project of short wave frame antenna.
Is it OK to short circuit some turns to tune the antenna ? This produce a large attenuation of the signal. I would use the crocodile to select the usefull number of turns ans let the useless turns open.
Not sure if I understood the way this antenna is supposed to work. But wouldn't the crocodile clip, attached to any of the taps of the coil, result in a (partially) shorted loop which is closely coupled to the active part of the antenna, thus worsening the efficiency?
Same as in an l match tuner, the clip does short out or bypasses loops. This changes the coils inductance and therefore the resonant frequency of the tank circuit.
Great antenna..hand s on..
Excellent technical work sir- if I may suggest a drill point bit for drilling pipe -less drill wander.
Great video Paul❗️ I have been thinking about building a Magnetic Loop but this one looks very interesting. 73. KV5P
Great project. Why use solder on the connectors? Wouldn't crimp connectors have less resistance and therefore better performance? I understand the oxidation issue for the tap points.
Soldering will give you a much better and solid connection, with less resistance, as it becomes as one. Laurn from the masters of the trade
@@lmy5pence481 Other "masters of the trade" tell me otherwise.
Soldering like brazing requires the correct quality materials and proper skills.
Solder bonds to the connector and conductor sealing out oxygen and moisture contamination.
Coax shield can be soldered but requires a lot of skill to do it correctly every time.
Therefore crimp type coax connectors are prefered by many.
For and other connection I use crimp and solder both.
@@tedmead465 I learned crimps were electrically superior from a college professor. With that said context is frequently lost and facts get twisted. I would like to see throwdown between the two techniques across a wide variety of connectors and situations.
Can’t wait to see your test results 73. KV5P
yeah the 2nd part soon!!
😃🤗
I think you should make some spreaders that keep the alignment of the wires uniform all the way around the antenna, You could #d print them or use some plastic with slots for each wire that snap into the seven wires to keep the spacing equal all way around.
Or just make wire spreaders with a collection of regular ZIP TIES.
I also use a hot glue gun to make strips on a coil form to hold turns ..should also be able to form spreaders on these wires with that . GL
Great job, 73!
Is it and EFHW on a frame basically ?
Very Nice. 😉👍
Thanks for sharing your experience and video.
73 Steve AA4SH
To první zapojení s krkosvorkou je nějaké podezřelé, bo užitím té krkosvorky páchám závit(y) na krátko. Tohle už jsem viděla na špuli v jakémsi antenním tuneru, kde tím řešili napětí nakmitané na odpojeném konci špule, nicméně připadá mi to přinejmenším podezřelé. Druhá věc je JAK se má vlastně navrhovat rámová anténa. Totiž. Seriová kombinace LC určitě půjde dostat do rezonance, no a mohu-li měnit jak kapacitu, tak indukčnost, půjde to v rezonanci dostrkat i do těch 50Ω, otázkou však zůstává je-li to rozumné. Já se snažila navrhnout rámovou anténu na 1.2MHz, čili střední vlny, ptala jsem se na to různých lidí, dostalo se mi mraku různých rádioamatérských plánků, ale žádného jasného postupu návrhu. Nakonec jsem to udělala diletantsky tím způsobem, že jsem stvořila LC rezonanční obvod buzený pomocným vinutím krmeným přes balun 1:9, který jsem kdysi v minulosti sehnala v jakémsi čínském shopu a vím, že funguje (přesněji řečeno mám to změřené). Nejprve jsem dostala do rezonance hlavní LC obvod, posléze jsem šolicháním s počtem závitů (a vyšlo mi to na nějaký 1¼ závitu) pomocného vinutí trefovala 50Ω na vstupu balunu. Bohužel otázka je u tohoto postupu úplně stejná - je rozumné to takhle dělat? Vím, že to, co popisuji, nějak vysílá, ale to ještě neznamená, že je to navržené správně. Nejspíš není, protože opravdu nevím jak se to má dělat.
Where did you get or how did you make that mounting tube??
Hi Paul will be great to see if this works another very interesting project regards to you at this time of the year
Hello ...I have another much simpler way of attaching the two cross pvc tubes together ....notch roundly, the vertical tube i/4" in the middle and using a heavy duty PVC Cement, glue the two together. The pvc can be purchased in three grades of adhesion strengths, light, medium, and high contact industrial. once set it will be like one solid piece. without screws or bolts and when the loop windings are applied the antenna will be even stronger.
Or just use plastic conduit, plastic solvent cement and a standard 4-way junction box to make the frame. Much easier and neater!
I wonder if the dead end effect is going to play a role in sapping away the effective power on transmission the way it does for variable inductors like crystal radios.
Can I transmit with this antenna?
Спасибо, попробую на приём, затем, интересно, как будет работать на передачу, пересчитаю на 3000кгц.
Would have nice to have had a English translation of the page! Also, what size wire did you use? #14?
#16 AWG is the wire size.
I have an air variable that goes from 4pf to 341pf. Good enough?
Yes 👍
Performance?
Thanks! Good execution. Such an antenna is needed when there are no large antennas, like I have now. I wonder how it works. Good luck!!! 73! RT9TM
Great job.
why not use a + pipe fitting instead of fiddling with the mounting plate & drilling so many holes????
thanks for sharing this!
спасибо, хочу тоже такое сделать
Только перед началом "прокладки" кабелька, надо приготовить клеющий пистолет. Продёрнул кабелёк и тут же клеем закрепил к пластиковой трубке - клей остывает быстро. И как результат, кабелёк будет чуточку натянут, а главное расстояние между линиями полотна антенны будет идеально ровное - красота великая сила!
У меня очень плохо с "аглицким". Хотелось бы знать как рассчитать длину кабеля?
@@victora.prokopenko6121 длина кабеля рассчитывается также, как и антенна, и умножить на коэффициент укорочения где-то 0,66., желательно, по характеристике волнового сопротивления кабеля.
excellent
Thank you
Thanks a lot for this video, Paul! I´m very upset to see how it works with the Xiegu. Got my transceiver yesterday but will unpack it not before next week at x-mas day 🙂 If the frame-antenna will work, I´ll build one also. So I´m hopefully looking forward for what You will tell us in your next video... Merry X-Mas!
Thank you!
Ican not see any reply from builder Paul it looks a receiving only ???
Hi Paul.....This looks great, love your videos and always pick up a tip or two, can't wait to see your results with this one, have a great Xmas and super 2022 Paul, GM0EDJ
Excellent
Hi Where is the Part 2 on TESTING do not seem to happend ???
th-cam.com/video/nCDe7B6CLDg/w-d-xo.html
Do you sell these antennas ?
Hai dear
U made it so nicely
Congratulations.
73 by vu3zmm
Is this for listening only? Or can you also transmit?
Also for transmit, but watch also a second part. Not good performance.
Aký hrubý je vodič ? 1,5mm?
That drill bit is called (in English,) a 'step-drill' bit.