If you are having issues programming the remote, as others have commented on here unplug the garage door opener for 30-45 seconds and plug it back in. Then it will work
This helped me alot. I had to replace my circuit board. Afterwards, I tried to reprogram my handheld remotes, as well as my outside keypad. I wasn't having any luck, and I stumbled upon this video, which informed me that I had to set my open/close limits prior to the remotes. Thank you.
Is it possible to have 2 remotes for 1 garage door? I program I program lets say remote A but then remote B doesnt work...then I reprogram remote B and now A doesnt work. I am guessing you cant have 2 remotes programmed to 1 garage door
JCW all my remotes quit working at once. Unplugged the power from garage opener for 30 seconds and was able to reconnect all openers But had to reprogram them. Not sure why yet...
Where can I find the carriage assembly for the emergency release? The assembly broke today. How can I find a dealer in my area? Hope to hear from you soon.
Hey guys how’s it gon? Today let’s take in in-depth tour of the Genie belt. And this is going to be a full in depth tour of the Belt. We can’t start it up, show the Legend, or gets grounded. And so withoutSoda a do. We can’t start it up let it run? Can We?
I set the down limit for garage door. When I push the up button to set up limit on the unit. It trys to open door and just goes chunk chunk chunk chunk shacks the rubber belt and door doesnt move. If I manually move door open and reattach it to belt then push button to close door. Same thing happens and door won't close. Please help! Any suggestions? I have genie model 2042
Remotes and key pad stopped working at same time. Re-set open/close limits with help of this video (manual doesn't make it clear that 3-flash pattern of green flashing LED will not change until all steps complete), re-programmed key pad with instructions on inside cover. Re-set the two car remotes - all good. Thanks.
Wow, this helped me out a lot. All the videos that I found had me looking at the sensors.
My wife was messing with the door after a temporary malfunction and she screwed it up. this video helped me reprogram the garage door. THANK YOU!
If you’re here to program the remote you can skip to 4:10 . It worked for me.
pro trick: you can watch movies at flixzone. Me and my gf have been using it for watching all kinds of movies lately.
@Cameron James yea, I have been watching on flixzone for years myself :)
@Cameron James yup, I have been using Flixzone for since november myself :)
If you are having issues programming the remote, as others have commented on here unplug the garage door opener for 30-45 seconds and plug it back in. Then it will work
This helped me alot. I had to replace my circuit board. Afterwards, I tried to reprogram my handheld remotes, as well as my outside keypad. I wasn't having any luck, and I stumbled upon this video, which informed me that I had to set my open/close limits prior to the remotes. Thank you.
Great video! Helped me close a small gap when the door was closed! Cheers 🎉
This worked!!!! Garage door...check! Love TH-cam videos!
Thank you! This video saved me tonight. I really appreciate it.
Fantastic. Unplugging before following the instruction in the manual did the trick.
Is it possible to have 2 remotes for 1 garage door? I program I program lets say remote A but then remote B doesnt work...then I reprogram remote B and now A doesnt work. I am guessing you cant have 2 remotes programmed to 1 garage door
This video just saved me!!
Great video, helped a lot
Thank you so much! You really helped two women on their own figure this out!!!
Best fastest video ever
Very helpful, solved my problems!
I was going to pay 150$ for this. Thank you so much
When was this model manufactured? Can't find it inside or around the motor?
i have used this video multiple times thanks to the poster
how do I add a second remote?
Saved me lot of money$$$ thanks
THX a lot! I solved my door problem. Easy to follow this video.
Trying to open the garage during a power outage. Any tips?
pull the release cord and lift the door manually.
how can I get a copy of installation manual of a Genie 1022 a door opener model ?
The one thing it doesn't tell you to do which fixed my problem was unplug the powerhead for 30 secs and plug it back in. That fixed my remote issue.
JCW all my remotes quit working at once. Unplugged the power from garage opener for 30 seconds and was able to reconnect all openers But had to reprogram them. Not sure why yet...
Actually, the video does mention unplugging the unit for a period of time. I don't recall if it mentions a specific period.
Thank you!!! You saved me a call to my landlord.
Saved me some $$$. Thanks.
Can someone tell me how to program a universal opener with a PIN number on this model? What is the color of the learn button. It’s very deceiving.
Where can I find the carriage assembly for the emergency release? The assembly broke today. How can I find a dealer in my area? Hope to hear from you soon.
Both of mine stopped working as well. The dang thing just wont see the signal. Programmed another unit to use my remote and it worked fine.
Mine won't close new out of the box and can't reset the damn POS!
Hey guys how’s it gon? Today let’s take in in-depth tour of the Genie belt. And this is going to be a full in depth tour of the Belt. We can’t start it up, show the Legend, or gets grounded. And so withoutSoda a do. We can’t start it up let it run? Can We?
thanx for showing because on the instruction was kinda weird im going to by 2 more remote
My belt snapped and I cannot find a replacement belt anywhere ( 7ft) can anyone help?!
very helpful !! Thanx
Robert Pine narrates this video tutorial. Rock on, Dye Job.
I set the down limit for garage door. When I push the up button to set up limit on the unit. It trys to open door and just goes chunk chunk chunk chunk shacks the rubber belt and door doesnt move. If I manually move door open and reattach it to belt then push button to close door. Same thing happens and door won't close. Please help! Any suggestions? I have genie model 2042
Remotes and key pad stopped working at same time. Re-set open/close limits with help of this video (manual doesn't make it clear that 3-flash pattern of green flashing LED will not change until all steps complete), re-programmed key pad with instructions on inside cover. Re-set the two car remotes - all good. Thanks.
Steve Walker thank you I had the hardest time getting the green light to stop flashing until I read your comment
My genie 1042 only opens when pressing button on power head. Wall button lite up but won't do anything. Any options
Both my garage door openers aren't working out of nowhere and now can't pair them up
programing remotes
Work it
Strange this is not working at all.
Did not help me. One remote works and the other does not
same here i can get 2 remotes to work for one door. Your post is 2 years old have you been able to resolve the issue?
This shit didn't help lmao
Stupid stupid stupid. Just how to program. The title gives the impression that it does but it doesn't.
This video did not help. It made things worse
Too much nonsense talk
horrible directions
what if the led doesn't light up
Then the board is bad.