BEGINNERS Guide to Using an Electric Planer.
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2020
- How to Use an Electric Planer. A Beginners Guide. The Electric Planer would have to be one of the handiest tools in the workshop. It’s basically a hand plane on steroids which makes them super fast and highly efficient!
Like all power tools, the electric planer can be a scary tool for the newly initiated. In this video, l hope to build up your confidence and take away the fear factor when using the planer.
The planers come in both corded and battery-powered models. I’m a bit old school and have a corded planer, that way l always have 100% power at all times.
The good thing about the corded model is that you can pick up a good one for a reasonably cheap price compared to the good quality battery-powered models.
I hope you find this video useful and continue to grow in confidence when it comes to using power tools of all types.
Cheers
I hope you enjoy it 👍😁🇦🇺
Before l go on...
Link to All My Woodworking Plans: DiyForKnuckleheads.etsy.com
Buy Me a Coffee.
Please help my Channel to keep producing DIY Educational Content with a small donation. Your generosity is much appreciated. Cheers.
www.buymeacoffee.com/unclekna...
Tools l Use in the Video:
Makita Electric Planer: amzn.to/2qZ2C61
Safety Glasses: amzn.to/2YQwSAY
Safety Glasses That Can Be Worn Over Glasses: amzn.to/3geVeKw
Hearing Protection: amzn.to/38iipRz
Link to Jig: diyforknuckleheads.com/how-to...
Link to Pipe Clamp: Irwin Quick Grip 1/2": amzn.to/3jHufbL
Please note that with this clamp, the pipe does not need to have a threaded end 👍
Option 2:
PONY 50 Pipe Clamp, Fixture for 3/4-Inch Black Pipe
amzn.to/3nZv0Az
Please WATCH the video that comes with this listing (The Pony 50 Pipe Clamp). It details what pipe you'll need and also is a very handy little tutorial.
Ways to Support my Channel:
👍 ➡️ Subscribe to my TH-cam Channel: / shaneconlan1
👕 Check out the Latest Swag from our New DIY For Knuckleheads Clothing and Accessories Store!
shop.spreadshirt.com/DIYForKn...
🛠 Tools of the Trade 🛠
Tools l Use, Resource Page:
diyforknuckleheads.com/tools-...
Tubebuddy: Install TubeBuddy for free to help you get the most out of TH-cam! www.Tubebuddy.com/DIYForKnuck... …………..
My DIY For Knuckleheads Website: diyforknuckleheads.com
-------------
SOCIALS: Please Note: If you intend to submit a Workshop Hack for review, please watch the following video for YOUR submission requirements. The relevant footage starts at the 2.22 mark. I look forward to seeing your tips 👍😁🇦🇺 • NEW WorkShop Hack Vide...
Instagram: / diy_for_knuc. .
Check us out on Facebook: / diyforknuckl. . …………..
Check out my NEW Spanish Channel! All the same videos but in Spanish! th-cam.com/channels/iJO.html...
Mailing Address:
DIY For Knuckleheads
P.O. Box 152
Sawtell, NSW, 2452
Australia.
------------
Music supplied by and Released under Creative Commons License 3.0. GET UP! by Nicolai Heidlas Music / nicolai-heidlas
Artist: Kevin McLeod
Music Title: Acid Jazz
Have a great day and l’ll see you again real soon. 😁
FTC Disclaimer:
This video is not sponsored. All items are purchased with my own money unless stated otherwise and opinions are my own.
If I do receive products for free, I will always disclose it and I will still always provide you with my honest opinion. This video and description contain affiliate links, which means that if you click on one of the qualifying product links, I’ll receive a small commission if you decide to make a purchase. This does not cost you anything extra and if you don't want to use the links, you can always Google the product separately, no worries. I am a participant in the Amazon affiliate program as well as TubeBuddy and others.
Links are provided for your convenience as well as my benefit. Some links are not affiliated but are shortened to preserve space in description box.
#electricplaner #planer #makitaplaner - แนวปฏิบัติและการใช้ชีวิต
I'm a widow & just found my husbands planner. After blowing the sawdust out I read the manual. I allways used our Hand planners so I'm a little Nerve's using this. I watch many DIY videos being self dependent & love my work shop. Your Video is the BEST!!. Extremely" easy to understand & your very educational. Now I feel confident thank thank thank You😉
Fantastic Paula! Well done on dusting off the planer. Once you get the hang of it, it's a very handy little machine 👍😁🇦🇺
Can I use the tools of your husband thank you
Let's go, all us nerds. Forget fear, keep respect.
@@diyforknuckleheadsI knew you are a great teacher. Now I know you are very nice too.
@@josepalacid Cheers mate 👍😁🇦🇺
For a 2 year old video, and your still responding to comments, just goes to show how dedicated you are!
I'm currently renovating our 5,000sq ft home. Doing everything DIY as much as possible. Your videos (and other creators) have gotten me through so many tight spots..thank you for what you do man! Keep up the great work! Cheers from Wisconsin USA! The cheese state 🧀🐄🧀🐄🧀🐄🧀
Cheers for that Richard! Appreciate the feedback mate. Yep still responding as you guys are the reason l keep going. It's a great way of building a positive community 👍👍 Good luck with the Reno's mate and thanks for taking the time to watch. 😁 Wisconsin sounds like my kind of State......gotta love a good cheese 👍😁🇦🇺
You didn't cover at all what the application of a planar is. Methods or uses and why.
@duke1281 You would feel right at home here - no shortage of cheese! 😊
Love videos like these, I can tell my wife to watch it and she'll understand why I need a new tool.
Hahahahhahaha....Smart mate......very smart 👍👍
Mark, you are a god !!!!
Ha ha ha ha ha ha
Hey amazing guy ...do you have any videos on how to correctly calibrate a mitre saw ?? I'm really convinced YOU would explain it better !!👍🏾
I came for the planer info...but the clamping options were gold. Subscribed for the Dad Jokes.
Of you have a wood tap you can use bolts and tap some handles to make your own vices. Only wood and not heavy metal but for a project and a useful cheap trick pretty cool.
the clamping options were good ad Vice (another dad joke)
I UNSUBSCRIBED because if the dad jokes...
Haha... yeah... exactly!!
This guy is seriously amazing, why didn't i find him sooner, just like a father with good advice :)
Thanks Zack.....great to have you on board mate 👍😁🇦🇺
@@diyforknuckleheads thanks Dad!
@@thrills120 😂
Agreed I want to be adopted by this guy 😂
That part using the clamps to make a vise was pure genius. Haven't seen anyone else doing similar. 💯
Cheers Bernie! Glad you liked it mate and thanks for the feedback 👍👍😁🇦🇺
@@diyforknuckleheads always found your contents very informative and practical. Thanks mate. Now let me have some of that tea. 😑
@@burningbernie Have a nice cuppa mate 👍👍😁
I’ve been watching wood working videos for years and this stuff is too notch. Especially the clamping advice. I’ve been struggling with my limited space, but those pipe clamp ideas are incredible
Cheers mate! Glad you liked the video and thanks for the feedback 👍😁🇦🇺
“Stand so that you are comfortable and relaxed “, while pantomiming “alarmed” with his body. Funny.
"And the award for the guy who you would most like to be your neighbor/buddy goes to Uncle Knackers!"
I watch a lot of woodworking videos and always watch your videos. the videos are awesome, the info is killer and the explanations easy to understand but your personality makes it fun too. thank you !
Cheers mate! Glad you like the vids and thanks for taking the time to watch. 👍😁🇦🇺
Pipe clamp vise was the coolest thing I learned in this one!
Cheers mate....glad you liked it 👍😁🇦🇺
I’ve seen “sash cramps” which cost £Mega for what they are. But pipe clamps are reasonable. Thanks for the heads-up. 👍
I'm not a beginner, but it's always a good thing to see how/what a other person is doing or think about it. It's never too late to learn something.
👍...Very true Peet.....thanks for watching 👍😁🇦🇺
I love your attitude, too many people in our trade think they are too good or too experienced to learn something new.
The most straight-forward, simplest, and easy to follow ever! Thank you very much for the wonderful instructions.
Great Advice!!! Also the one for magnets to detect hidden nails in the wood... as simple as amazing!
No worries Alessandro! Glad you found the video useful mate and thanks for watching 👍😁🇦🇺
The best, most comprehensive video I’ve ever seen on the use of a power tool.
Great job!
Thank you for the comment Lee! Much appreciated mate 👍🇦🇺😁
You had me at "anatomy lesson" excellent, so glad I found your channel! New subscriber! VERY well done!
Nothing like a photo of someone's mishap to make you sit up and pay attention! 4:50 advice gold. Great pipe clamp uses, too.
Thanks mate 👍 Yeah that was a nasty cut.....it healed up incredibly well which was amazing 👍😁🇦🇺
What a great idea for a quick makeshift leg vice - great tip knackers - or should it be quackers!! You bloody legend! Keep em coming mate
😂....thanks Matt! Gotta say the vice works really well mate...give it a go 👍 Have a great weekend 👍😁🇦🇺
Best damn accent in whole Australia ❤️ Can't get enough of it :) The tricks with the pipe clamp are nice too!
👍...Cheers Nick 👍😁🇦🇺
Re the accent...he gives the lovely Rita Panahi a run for her money.
Thumbs up for the pipe clamp vice idea. Genius.
Glad you liked it! Thanks for watching Graham 👍😁🇦🇺
Great 👍 idea for the clamp. 😁
Thanks mate! Appreciate the feedback 👍🇦🇺
Thank you for this video, specially for last part demonstrating how to use Pipe clamps.
No worries at all Arresha! Glad you found it helpful and thanks for watching 👍😁🇦🇺
Great tip Knackers, I wish I'd seen this before I tried using one a few years ago, I gave up and went and bought a hand plane. Thankyou for sharing.
No worries Stuart! Glad to shed some light on the machine mate 👍🇦🇺😁
Best power tool video I've seen, buddy! Thank you.
Cheers mate! Glad you found it useful 👍😁🇦🇺
Very well explained! Thank you!
Thanks James! Glad you found it useful mate 👍😁🇦🇺
This was definitely informative, I have a power planner but was not knowledgeable of it’s correct use. The tips regarding the blade flipping also was an eye opener!
As far as the use of clamps, that is brilliant! Please record more tips like this.
Thanks!!
Glad it was helpful Les and thanks for watching mate....much appreciated 😁👍🇦🇺
First video of your I've watched, well done sir. I'm still new to wood working and understand the need for straight pieces. I've been using a router table I built but a hand planner looks like it can be quicker set up. Like anything I just need to practice with it. The section on using pipe clamps was huge, justified getting them ...
G'day Steven....glad you found the video useful mate 👍 Thanks for watching 👍😁🇦🇺🎄
1. Pipe clamp vice deserves a video of its own.
2. How to avoid streak marks when using an electric planer for face planing as opposed to edge planing?
"Don't buy a cheap set of pipe clamps".....VERY good advice!! Harbor Freight taught me that!!
👍
you're a great teacher, thanks for the tutorial, grateful Pom
Cheers Ray 👍.....Glad to help mate 👍😁🇦🇺
Great video!! I've been doing woodworking, both professional and DIY, for 50 years. I've never ever seen the tricks with the pipe clamps through the table top or the legs. It just goes to show you can still learn stuff every day.
Thanks for the great video.
BTW... don't quit your day job just yet. You'll starve to death if you rely on those jokes to put food on the table.
Hahahahha...WHAT......that was one of my best jokes Steve!! Thanks for watching mate 👍😁🇦🇺
The pipe clamp ideas were worth watching the whole video for!!!
Glad you like them mate! Thanks for watching 👍😁🇦🇺
Quack quack! 🤣 Loved the pipe clamp
😂....cheers Daniel! Have a great weekend mate 👍😁🇦🇺
Have you had a budget increase Unkle K? Two pencils? One looked brand new!!!!!!
As always informative and entertaining in equal measures. Keep up the great work.
Hahahahahhahaha.....pencils are a premium in my place mate...having two is unheard of😂😂
Thanks for watching mate 👍😁🇦🇺
LOVE your jokes !! As a old guy doing woodworking for 50 years, I find your videos very informative. I'm just not that great at teaching people . Going to show some young DIY's neighbors your channel, you will teach them such great knowledge and terrific tips. Thank you so much !!!!!!
No worries Rod! 👍 Thanks for sharing the vids mate....really appreciate it 👍😁🇦🇺
Perfect timing on this video. I recently bought my first electric hand planer and then this video popped up.
Google is listening Chris 😂😂 Good luck with the planer mate....it's a great little tool 👍 Thanks for watching 👍😁🇦🇺
I am happy to accept the demonstrator as my guru in wood working jobs. Thanks a lot.
Thanks mate! I appreciate the comment 👍👍😁🇦🇺
Hello my friend.
These are really good tips. I learned about Makita planer blade replacement. Thank you for sharing. Big greetings. Yours truly.
No worries at all.....glad you found the video useful and thanks for watching 👍😁🇦🇺
@@diyforknuckleheads You're welcome. See you. I wish you a good day.
Great tips... keep em coming Knackers!!
Thanks Clayton!! Glad you liked them mate and thanks for watching 👍😁🇦🇺
The clamp ideas for vice is genius ! Thank you sir
My pleasure!....glad you liked the idea 👍👍😁🇦🇺
Simple, precise, informative and NO NONSENSE. I love the vise clamp.
Thanks for teaching low cost alternative.
No worries Shailesh! Glad you found the video useful mate 👍🇦🇺😁
You lost me at the duck joke!
175k subs and you still reply to all your comments. Wow!.
Done my part to get you to 176k! great vid by the way 👍
Glad you liked it Dustmeister! I still comment as l think it's the least l can do for someone who has taken the time out of their day to watch one of my dodgy vids and then leave a comment....l really appreciate it 👍👍 Thanks for the sub too....👍😁🇦🇺
Thanks for the vid, and I appreciate the emphasis on safety! Nothing infuriates me quite as much as woodworking videos that demonstrate unsafe practices.
Cheers Patrick....appreciate the comment mate 👍😁🇦🇺
Yeah, whenever there is a video teaching anything at all, I cringe when they do not show/explain safety practices.
It should be a part of every tool or woodworking lesson for newer folks that could be watching.
I love your way of presentations. Thanks for sharing all of these tips.
Thanks mate....glad you like the vids....l appreciate the feedback 👍😁🇦🇺
Just wanted to say how useful this video has been for me, I bought an electric planer about 10 years ago, to planer a single door, did that and it has sat in its case on the shelf since as I wasn't sure how to use if for much else - this video has really helped me understand what it does and how to use it well.
I've got into some small wood working tasks during 'lock down' and watched so many youtube videos where they have these amazing workshops, your videos are great in that your setup is not dissimilar to my own - a work bench and some basic power tools - and I feel like I can do what you're showing.
Thanks for the videos.
Thanks for the feedback Peter. I keep my shop fairly simple as that is the audience that l'm looking for....nothing to fancy here mate 😂 Have a good one mate 👍😁🇦🇺
This is EXCELLENT! I'm comfortable with most power tools, but these planers have always scared the hell out of me. Now I need to use one for scarfing plywood, and I feel a lot better about it thanks to your clear, sensible presentation. Thank you!
You're very welcome Chris! Glad you found the video useful mate and all the best with the planer 👍😁🇦🇺
planer is whole lot safer then circular saw,table saw ,angle grinder reciprocal saw
“Ducks don’t speak English as far as I know” 😂😂😂
😂😂....apparently that's what l've been told 😂 Thanks for watching
Jesse 👍😁🇦🇺
@@diyforknuckleheads Just told my partner the 'dad duck' joke, pause of a few seconds then he cracked up, which is what I did when I heard it :)
@@jesshothersall Hahahahaha.....it''s the simple jokes that l find the best Jessica 😂
The use of pipe clamps is genius.
Glad you liked them Shaun! 👍😁🇦🇺
Those pipe clamp ideas were pretty good.
Cheers mate...yeah they work really well 👍😁🇦🇺
Greetings My King, we give thanks for your information, i do have same planner 😍😘 I love wood working
Hi Bongani....glad you found the video useful mate and thanks for watching 👍😁🇦🇺
@@diyforknuckleheads yes I please send more videos we love wood working and we living with it, it brings food on the tables 😅😎🤗
I did subscribe for more videos please make a plan with us as your subscribers 😁
May I ask something about having a you tube channel, did you you tube pay and how?
@@bonganimkhwanazi5097 Hi Bongani. Because TH-cam is owned by Google, Google pays you a very small amount of money to play their ads on your video. 👍
I am about to plan a couple of doors tomorrow and it’s one job I suck at. This video couldn’t have come at a better time 👍
Good stuff Joel! All the best with the doors mate 👍 Let me know how you go 👍😁🇦🇺
@@diyforknuckleheads hi buddy, what's the brand of blue pipe clamp that you use in this video? The link is for a different clamp that looks not as good for what I need. Thanks for sharing!
@@silversurfer233 They look like Irwin pipe clamps
@@silversurfer233 Mate, mine are Irwin Clamps suitable a 3/4" Pipe. They, unlike a lot of other pipe clamps don't require a threaded end on the pipe which was really appealing to me. I did a search on Amazon, found the same type but it was for a half inch pipe which to be fair is probably OK. The ones l linked to are a very popular model and will do the job for you perfectly. Thet just need a threaded pipe. Hope that makes sense 👍😁🇦🇺
@@diyforknuckleheads thanks for the reply, I will get a set of each as they will be "good to go! "
Shane your videos make wood working and related tools use so much easier. Your presentation and explanations suit amateurs like my self to improve our skills without rushing or jumping in to quickly. Thank you and keep it up.
Awesome! Thanks for the feedback Paul....it's much appreciated mate! Cheers 👍😁🇦🇺
@@diyforknuckleheads Further to this Shane I bought the IRWIN clamps via Amazon, got a couple of pieces of pipe and now have a couple of various sized vices for similar use to your video, excellent and again my thanks.
Came to learn about a planer...but those tips about using pipe clamps as a holdfast or leg clamp were pure gold. Thank you, sir!
My pleasure mate! Glad you liked them and thanks for watching 👍😁🇦🇺
You missed a bit of self deprecating humor there "the knob on the top of the planer is the person using it, this one is for changing the depth" hehe, great vids :)
Hahahahhaha....I'll have to use that one in the future J.S 😂 Thanks for watching 👍😁🇦🇺
Hello I love u channel ...and I always do your projects
Thanks mate!.....really appreciate the comment and your support 👍🇦🇺😁
I love, love, love 💘❤💕 you leg vice option!!! Affordable, also.
👍😁...Cheers for that...glad you liked the vice...works really well 👍😁🇦🇺
This guy is absolutely the best instructor...ever, anywhere. He should run courses on how to teach...any subject.
👍😁.....Thanks Brian! Really appreciate the feedback mate and thanks for watching 👍🇦🇺😁
I bought an electric planer after I watched how you planed that cool big dining table you made, but yeah I was a little afraid to use it at first.. Always love your videos and learn alot from them--thanks for taking the time to put them together for us. And I love that jig--I'll have to make one of those this weekend!
Awesome! Thanks Lisa......Glad you found the video useful 👍😁🇦🇺
Hi Lisa,can you give a link to the dining table or a header please
your thumbnail reminds me of when I did that very thing and took the tip of my finger off. i was so used to feeling for the blade as a carpenter mind you it was over 35 years ago
Oooohhhh.....you wouldn't forget that mate 😬 Thanks for watching 👍😁🇦🇺
Great guide too, Uncle Knackers. I have a Rockwell from the late 60's with all of the guides for doors.
Steve!!!!....that's genuine antique mate 👍👍 Thanks for watching mate 👍🇦🇺😁
Pipe clamp vice !!!! Brilliant . Great tool the planner , thanks for tips on eliminating snipe😄
No worries Annie and l'm glad you liked the homemade vice.....works a treat! Thanks for watching 👍🇦🇺😁
When I use most of power tool, I place the cable on top of my arm rather than drag it behind the tool. My tip 😜
Over the shoulder works for me.
Great idea. My angle grinder lead is about 6 inches (old speak) long now. I’ve cut it so many times. It’s a wonder I’m still upright.
Thanks for the tip.
Good plan thanks
All of the above, plus sometimes tuck a bight under my belt, with just enough slack to feed my reach.
You guys need to join the 21st century and invest in cordless tools 😉
Perfect timing Shane, I've just bought one, but you knew that didn't you ? !! :-)
😂😂...using all my psychic powers Jim l just knew 😂. Thanks fir watching mate 👍😁🇦🇺
I use pipe clamps in a lot of creative ways and I have to say, you got me with these tips! Can’t wait to see more videos from you!
Cheers Kent! Yeah the clamp vices work really well 👍 Thanks for watching mate 👍😁🇦🇺
hi,
you might want to mention that you are left handed.
First time I see a pipe clamp! Thanks for the good tips!
Henry
No worries VTD! Glad you found something useful in the video 👍😁🇦🇺
Great vid and I’m not even gonna lie...I laughed at the dad joke.
😂....you obviously have great taste in humour 😂 Thanks for watching mate and l'm glad you enjoyed the video. Cheers 😁🇦🇺👍
I did as well, and I’m instantly telling everyone I know!
@@natejm Hahahhaaha.....good stuff mate 👍🇦🇺😁
I thought this was an advertisement and I was waiting for a while for “skip add” Then my husband started watching this with me. Now he owns a plainer. I asked him what he is going to do with it. He didn’t know.
😂.....Classic 😂
"You never know when you might need it!" Accounts for many tool purchases
🤣🤣🤣🤣 even I, i am in my way too.
just stumbled on your vid, Great ,love your approach Ive been working wood for 40years and found this refreshing thanks from the UK
Thanks Paul 👍 Appreciate the comment mate 👍🇦🇺😁
Such a nice guy you seem to be! Great tips and great personality. Thank you!
I was thinking to myself, why don’t I have a bench vice?
I was thinking through every reason till I simply thought, “I don’t have bench.”
😂....That would do it Travis 👍😁
I've owned one of those for 20 years and I didn't know what that v-grove was for...
Now you know Otis 👍😁
Great teacher with humours...,
😂🤣🤣🤣
Thanks Seimin! I appreciate you taking the time to watch 👍😁🇦🇺
I just got the Bosch PL2632K ... and wow!! It's unreal how amazing it is. Way better than my old makita, or newer Dewalt. Omg. I wish I would've bought Bosch long ago. Everything I've bought has felt like going from a Toyota, to a Porsche!!
Great video. Subbed
Thanks Mike....glad you found it useful mate 👍😁🇦🇺
@@diyforknuckleheads you are married you had wedding ring
Same
A dad joke , well my joke , What do you call a sheep who's had a haircut :- Shaun
😂...I like it mate 👍😁🇦🇺
@@diyforknuckleheads Maaate I was in hospital some time ago and said to the young nurse do you like grumpy old men and she said No and I said nether dose my wife .
I love DIY work. This video can help me a lot. Very informative. Thanks for sharing. Stay safe.
Thanks NIkispils!
👍😁
Bunnings will be left wondering why are they selling so many planers this Sunday(tommorrow)
Hahahahaha...They probably don;'t have any 😂 Cheers mate 🇦🇺😁👍
Clamp things every time. EVERY!! Being clever, I was trying to run a wedge across the cutters with left hand, and holding the plane right hand. Piece shot away and my finger ends went into the cutter. Could see the boney ends etc.
Sounds obvious, but working with it every day hanging doors, familiarity breeds contempt.
It took nearly 2 years to grow sufficient skin etc to 'look normal' and about another 6 years for feeling to return. I did know better. :0/
These things are NOT forgiving.
WOW! Very nasty indeed Dave.....l agree that familiarity can be a dangerous thing leading to complacently. Take care people 👍
Mephisto, thanks for your testimony, it will help to keep a least one, and probably many, folks in full possession of their fingers. A mitzvah.
Wow . The trick with the clamp is amazing!
👍😁....Cheers mate 👍😁🇦🇺
Clamping tricks are AWESOME! Thanks
Yeah they work really well Jared 👍👍 Thanks for watching mate 👍😁🇦🇺
In America, women have to be completely self taught. We're treated horribly by men in this field. So your video is very helpful! I appreciate how you explain things.
😊👍.....Thanks for that...glad l could help 👍
Same for most people..
Uhh, where do you think every other man learns…
If you're going to work with reclaimed wood, invest in an actual metal detector. Aluminum nails will laugh at your magnet and puch your planer in the teeth.
Better a carbide blade and can cut any nail or almost any screws too.
Most steel blades will cut aluminum no problem. If it's carbide, even better. It's steel nails and screws that will kill a blade fast.
@@cchavezjr7, right on. The reason one of my preferred push sticks on the table saw is aluminium with a bird’s mouth. Nothing drastic happens if the blade is grazed, just cuts through it.
Much needed intro to planers. Thank you 👌🏽👌🏽👌🏽
No worries at all mate! Glad you found the vid useful 👍😁🇦🇺
Very useful for a new planer user. I was a bit confused for a while until I realised this some of this was instruction for a left handed user! Make sure you reverse everything.
👍
Thank you for sharing Love will win, fear will not - Love fear 💖 than it will never win 🙏
Thanks for the set-up advice
No worries at all! Thanks for watching 👍😁🇦🇺
Great vid. You have solved a problem I had with the cutting at the end of a piece.
Cheers, Carl
Thanks Carl...glad to help mate 👍🇦🇺😁
Pipe clamp vice is handy, nice tip
Thanks mate....yeah it works very well 👍😁🇦🇺
Nice job. Thanks .
No worries mate 👍😁🇦🇺
Came here to learn about electric planing and got a bonus solution to my clamping conundrum. Nice one mate!
My pleasure mate....glad to help 👍😁🇦🇺
Thank you so much for the table vice from pipe clamp tip.
No worries mate!...My pleasure 👍😁🇦🇺
Some great basics and some nifty tips and tricks covered in this video. Thanks
Thanks Mark 👍😁
Love this guys no frills style.
He's just so easy to listen to.
👍.....Cheers Davy! Appreciate the comment mate 👍🇦🇺😁
Ripper! Excellent.
Cheers Mickey 👍😁🇦🇺
great tips, I had no idea!! Thanks for the safety tips
No worries at all mate.....appreciate the feedback 👍😁🇦🇺
Dynamite video, looking forward to more.
Awesome, thank you mate! 👍😁🇦🇺
before seeing this video I have a plan to buy a table clamp, but this is more complete, simple and cheap. thanks for the tutorial boss. 😁👍
My pleasure mate....glad it was helpful 👍🇦🇺😁
@@diyforknuckleheads ok 🇲🇨
Thank you !
These types of videos are the best. There are so many videos with people doing perfect work with top shelf tools that were given to them by sponsers.
Thanks Kun! Appreciate the comment mate 👍🇦🇺😁
Always appreciate your approach to these videos. Thanks a ton!
No worries at all mate! Cheers 👍😁🇦🇺🎄
Exactly what I needed to know, thank you!
My pleasure mate 👍