Dual Channel 10A Motor Driver (MDD10A)

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ธ.ค. 2024

ความคิดเห็น • 40

  • @runningwithscissors7715
    @runningwithscissors7715 5 ปีที่แล้ว +3

    great introduction, this motor controller works great with an arduino to control brushed motors,its like the bigger brother to the l298N..for the people the buttons are just there for testing not for continual use you will need to connect it to an arduino or raspberry pie.again thanks for the vid and i will be buying one !!!

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว +1

      Thanks for the feedback. We really appreciate it. :)

  • @limleantun3112
    @limleantun3112 9 ปีที่แล้ว +1

    I used a 9V battery as my power supply for motor, but when I test with multimeter, it just consist of 3V or something only, how can solve this? If I used Arduino 5V output as power supply of motor, it does not have that problem.

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว

      Hi, you may email to our technical team at support@cytron.io Thanks :)

  • @RecehDIY
    @RecehDIY 2 ปีที่แล้ว

    can you combine each channel output into a motor?}
    i mean, is it possible to get more amperage if you combine (parallel) it?
    thx

  • @georges8408
    @georges8408 8 ปีที่แล้ว +3

    How can we controll speed of each motor ? with a potentiometer or RC ? this video is not explain it

    • @cytrontech
      @cytrontech  7 ปีที่แล้ว +3

      Hi, you can look at our tutorial here tutorial.cytron.com.my/2013/07/29/controlling-md10c-with-arduino/

    • @georges8408
      @georges8408 7 ปีที่แล้ว +1

      thanks :) ... i will have a look!!!

    • @as_7867
      @as_7867 4 หลายเดือนก่อน

      ​@@cytrontech sorry sir ...but the link that you shared it here doesnt we found it 🙏🏽
      So please up todate your link for me sir ... 🙏🏽
      Thank yours

  • @MegaAfonsoBernardino
    @MegaAfonsoBernardino 5 ปีที่แล้ว

    Hi i ave one board but it only does short burst of power i have to keep pressing the button many times to work instead of just one continuously press

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว

      Hi, you may email to support@cytron.io for any technical assistance. Thanks :)

  • @jamespowell7231
    @jamespowell7231 6 ปีที่แล้ว +1

    Can you control each motor independently in both directions?

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว

      Hi James Powell, sure it can. :)

  • @mohamedsameer8384
    @mohamedsameer8384 7 ปีที่แล้ว +1

    could I use this pwm controlled motor driver as ordinary motor driver ??

    • @cytrontech
      @cytrontech  7 ปีที่แล้ว

      what do you mean by the ordinary motor driver? can you explain more? Thanks :)

  • @MegaMino31
    @MegaMino31 6 ปีที่แล้ว

    i have a question
    how is the the voltage regulated from whatever battery voltage suppled between the 5V to 25V. to the logic input volage level between 3.3 to 5.5
    there must be logic gates involved to compare between the pwm single and the logic input for DIR. how are those logic gates (VCC) powered.

    • @IdrisZainalAbidin
      @IdrisZainalAbidin 6 ปีที่แล้ว

      There have buck and boost inside the board. Maybe the MOSFET driver can accept 3.3V - 5V TTL signal to operate.

    • @cytrontech
      @cytrontech  6 ปีที่แล้ว

      Hi, for clear info please go to our forum (forum.cytron.io/)

  • @chisomodimmegwa3479
    @chisomodimmegwa3479 3 ปีที่แล้ว

    Posted long ago but will try my chance. Can this be controlled with the esp32 cam module

  • @ankitkr.mishra2421
    @ankitkr.mishra2421 7 ปีที่แล้ว

    how to interface ultrasonic sensor with this dual channel motor driver? please share some link or your advice with us. thanks in advance

    • @cytrontech
      @cytrontech  7 ปีที่แล้ว

      We advise you to use the microcontroller or microprocessor, for example, Arduino as this motor driver is to control the motor only. :)

  • @nawinlifehacks9978
    @nawinlifehacks9978 5 ปีที่แล้ว

    How can define IN1,IN2,IN3,IN4,and ENA,ENB pins in MDD10A dual channel motor driver.. please explain

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว

      Hi, it has 2 pins for this motor driver: PWM1 (for speed) and DIR1 (for direction). Thanks :)

  • @saculmurem5402
    @saculmurem5402 6 ปีที่แล้ว

    Can i used my own rf transmitter and receiver module connecting to this?

    • @cytrontech
      @cytrontech  6 ปีที่แล้ว

      This motor driver supports locked-antiphase and sign-magnitude PWM signal but not for "RC PWM"

    • @cytrontech
      @cytrontech  6 ปีที่แล้ว

      Hi, for clear info please go to our forum (forum.cytron.io/)

  • @zoba4645
    @zoba4645 4 ปีที่แล้ว

    Will this work on two 24V motors or needs to be 12V or less?

    • @cytrontech
      @cytrontech  4 ปีที่แล้ว

      Yes, it will work from 5V to 30V for Rev2.0. Rev1.0 will still work from 5V to 25V though.

  • @77Treasurehunter77
    @77Treasurehunter77 5 ปีที่แล้ว

    Your videos NEVER show how to use with microcontroller in conjunction with the driver..........is it because that portion doesn't work?
    I'm trying to use similar driver MD10C from Cytrontech with Arduino uno. Sending PWM signal out of arduino doesn't seem to be compatible with this board pwm input. I'm outputting PWM in simulink with arduino output PWM block and sending that to this board. I am using logical HIGH or 1 and LOW or 0 to send to the digital output to get the DIR command.......yet nothing happens. I have Arduino Uno 5V motor driver supply voltage. Test buttons produce a result, but controller doesn't

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว

      Hi Aaron Piper, we're sorry that you feel inconvenience with our product. Yes this driver works with microcontroller. You can refer to this video from our customer.
      Cytron MDD10A: How to use it with Arduino
      th-cam.com/video/JzRiqCpqcb0/w-d-xo.html

  • @abdulhananzaroo8704
    @abdulhananzaroo8704 10 ปีที่แล้ว

    Hi ... Is this motor driver compatible with arduino UNO ? thanks

    • @FrankLopezx
      @FrankLopezx 9 ปีที่แล้ว

      dude pay attention he just said this in the video

  • @ankitkumar-fy2om
    @ankitkumar-fy2om 7 ปีที่แล้ว

    The motor driver is overheating how to debug this

    • @cytrontech
      @cytrontech  7 ปีที่แล้ว

      can you send your problem to support@cytron.io. We will help you with details. Thanks

  • @samuelsamuel956
    @samuelsamuel956 8 ปีที่แล้ว +1

    Wah seh, diffcult man, how to do?

    • @cytrontech
      @cytrontech  5 ปีที่แล้ว +1

      Hi, you may refer to this link: th-cam.com/video/JzRiqCpqcb0/w-d-xo.html Thanks :)

  • @WV591
    @WV591 4 ปีที่แล้ว

    No RC control. bummer

    • @cytrontech
      @cytrontech  4 ปีที่แล้ว +1

      You can check out another motor driver that comes with RC control mode, check the MDDS10 at www.cytron.io