Wifi 6 and Bluetooth 5.2 in that tiny little card......it looks well smart and at that price its not too much of a strain on the wallet especially at this time of the year. Thanks for the review Mike and Kath :-)
Good review Mike and nice performance figures. We recently reduced our Lightspeed service from 200mbs to 175mps because we dont need such high speeds. Not tested speeds recently but earlier in year was getting nigh on the 200 download. It all depends on whether your fibre optics is to the nearest cabinet or direct to the exchange. KCOM are to the exchange and the dual band Technicolor router gives good signal and can easily control my kids access thru the UI...much to their annoyance!!! Thanks Mike and Kath for reviewing!
@@mikesunboxing 2bh Mike kcom had given us a zyxel router and kept crashing wen changing kids settings, so replaced with technicolor and ptoblem solved. Admittedly not as outright quick but great UI. Kcom raised our price by fiver without telling us so dropped speed and kept cost as b4. Take care and hope you & Kath get well soon👍
I decided to take a punt on this card based on your great review and I’m so chuffed with the results. Our PC is on the third floor and the router is in the ground floor, and we had a cheap usb network receiver plugged in which of 200mbps download gave us 20mbps in the usb2.0 port or 50mbps in the USB 3.0 port. As soon as I downloaded the correct driver from the Intel website for this network card it gave us the full 200mbps. I was honestly shocked. And I got it for £36 same day delivery from Amazon prime. Thanks very much for the great video to give me the nudge to bite the bullet. Keep up the good work
@@mikesunboxing no problem. I think you came across very honest and unbiased which is why I bought it in the first place. Subscribing to your channel now 👍
Hi, Mike. My router is currently 5g. I'm paying for 150 Mbps down and 10 Mbps up. I just tested my wi-fi speed and was happy to see I'm getting 149 Mbps down, and 6.6 Mbps up. Besides the speed of your router and broadband connection, it's also important to set your MTU for the largest packet size your system can handle and set your DNS to a free fast DNS server. My MTU is currently set to 1470 and I'm using Cloudflare: 1.1. 1.1 & 1.0. 0.1 for my DNS server.
@@mikesunboxing On my old SHUB 2 in router mode (don't know if it applies to later models) I find VM's default DNS is accelerated by local caching in the hub, and actually scores pretty well in Gibson's DNStest
Great video thanks Mike. Talking about Wi-Fi, the internet connection at my farm is really sketchy, so I moved the modem to the barn. Now I have stable wifi.
Nice review Mike. I currently use a hard line at home, but that might be very useful at work. Great review as always Mike and Kath. Take care, be safe. Cheers
Hi Mike, that looks like Cudy AX3000 Wireless WiFi 6E PCIe Card, Bluetooth 5.0, and with the INTEL AX200 Module in it I bought a few months back off amazon brilliant little card.
Just rescanned my locality, there are about 5 networks (some multinode mesh) using 80MHz channel width on 36-48, and little me using 20MHz on CH100. Everything defaults to the 36-48 range as that does not require DFS selection to avoid radar, so everything ends up on a single 80MHz channel. If you want clearer 5GHz, then in the VM Hubs it is called auto performance - auto compatibility lands you in the 36-48 scrum. A bit like the mess on 2.4GHz (UK) where everything uses the US defaults of 1, 6, 11, but with UK allowing 1-13, a choice of 1, 5, 9 (NB. Microwave oven nominal centre frequency), 13 would be better, as well as allowing TWO 40MHz pairs of 1,5 and 9,13 - though in general, using 40MHz mode on 2.4GHz is antisocial and a lot of equipment should fall back to 20MHz if there is congestion - but some does not. PS. You could test it harder by doing NAS transfer
Mike! Try & bridge the 2 LAN ports on a B550 Tom officially MSI say you can't (why put 2 LAN's on a motherboard then?) If it could be done that would be interesting to see if there is any gain in how much data you can download per second? There is a bargain a the moment on flight sticks, it's worth looking at the Thrustmaster Airbus A320 it's going for less than the 1600M & has 2 triggers instead of 1 which is better for air combat, the software is a bit of a pain because of the switch underneath the base for left & right handed but so far it's worth a buy.
I'm thinking of getting their cheapo WiFi 1200 Bluetooth 4.2 card, not because I need WiFi on my PC since it sits right next to the router so I use Ethernet but for reliable Bluetooth... Lots of reviews say it's decent.
buy you other antennas for it-which ones with a long klabel then you can position the antennas better. I've also done that and lo and behold the speed is better. Am in the 5ghz wifi for it
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
Hi Mike! I have a question, what if your motherboard already has an integrated wifi card already? Do you need to take it out before you insert a new one?
CharOriginalVids Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.
What happens if you don't use the USB plug.. can communications still take place through the pcie connector.. I don't understand why you need a USB connector when you already connected via pcie.....is the pcie just a mounting power prop?
there are a few options, and really it will depend on what your router or mesh can do, no real point spending a ton of money on a wifi 6 or 6e card if the router can't support it. Ideally stick with an Intel chipset if you can, they seem to be more reliable and drivers are easy to get and install. let me know more about your router setup and i'll see what i can find out for you
Why does it require the use of a USB connection? I've never seen one require this before, it can't be for power, PCI provides that, or data either, is it just a Bluetooth thing?
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
How is a x1 PCIe slot going to transfer 5Gbps (like it says on the box)?.. Gen 3 x1 = 1GBps Gen 4 x1 = 2GBps Gen 5 x1 = 4GBps My x1 slots are gen 3 so would bottleneck that 6e card a lot?.. If I put it in the longer slot would that help?.. Even tho the actual board is that short type?..
I just installed this but the Bluetooth ( Intel Wireless Bluetooth ) is always showing in the ( safely remove hardware and eject media ) option in system tray ,which is very annoying. Is it the same for you?
@@mikesunboxing Idk it's wierd my thing won't fit cuz it's too wide and the pcie is so close to edge it's just a pcie slot the small one it fits but I have no room u get me? anything I can do?
@@tobyk3680 This is maybe easier to fix or at least advise if we can ask more questions/pics and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
I have a similar card same chipset fenvi I have a nighthawk router 6E Wi-Fi and I still can't see my 6ghz wifi I've tried several cards and routers still no luck
Hello, I´ve bought the laptop version of this chipset (Intel(R) Wi-Fi 6E AX210 160MHz for M2 slot), installed proper drivers from Intel but it seems I cant´t find my Wi-fi at 6Ghz band, shared from my Samsung Galaxy S22+ . Main reason is to test my mobile 5G network and use its full potential. At 2,4 and 5Ghz works fine, somewhere I think I read it is not calibrated for 6Ghz yet and it can´t work with WPA3, only on Open network?
@@silvrchariot3254 This is maybe easier to if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
currently sharing my 5ghz wifi with multiple people which makes it really annoying to play pcvr games on the quest 2.. will i be able to play pcvr games while connecting to this WiFi 6e without having to connect to my main router
Put UNBOXING on the title if that's what the video is about. I was looking for info on the company and drivers sense new comps usually don't come with DvD drives anymore. Nothing about how to install if you don't have the DvD drive. Thanks for wasting my time.
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
WELL FK my motherboard GA-Z270-HD3 has the usb header far waaaaay from express port over the Gpu port either I need a a loong ass cable or a new motherboard
thank you for this video, but could very more useful if we could understand what are you talking about ,because for non English citizens not have a clue what you are saying,could be nicer to try to explain more slowly and without the heavy English accent thank you
Available from affiliate links: amzn.to/3GPqUXC
Amazon Local: amzn.to/3soARDA
Ebay UK: ebay.us/XEKoft
Ebay US: ebay.us/SdpP1f
Ebay CA: ebay.us/fMY1sa
Ebay AUS: ebay.us/ODTvd8
Wifi 6 and Bluetooth 5.2 in that tiny little card......it looks well smart and at that price its not too much of a strain on the wallet especially at this time of the year. Thanks for the review Mike and Kath :-)
i was actually quite impressed at the speed especially in this room that normally sucks
Good review Mike and nice performance figures. We recently reduced our Lightspeed service from 200mbs to 175mps because we dont need such high speeds. Not tested speeds recently but earlier in year was getting nigh on the 200 download. It all depends on whether your fibre optics is to the nearest cabinet or direct to the exchange. KCOM are to the exchange and the dual band Technicolor router gives good signal and can easily control my kids access thru the UI...much to their annoyance!!! Thanks Mike and Kath for reviewing!
thanks nick, sounds like you have a decent router there. Our Virgin Media one is pretty awful
@@mikesunboxing 2bh Mike kcom had given us a zyxel router and kept crashing wen changing kids settings, so replaced with technicolor and ptoblem solved. Admittedly not as outright quick but great UI. Kcom raised our price by fiver without telling us so dropped speed and kept cost as b4. Take care and hope you & Kath get well soon👍
@@Senrab46 Thanks Nick :-)
I decided to take a punt on this card based on your great review and I’m so chuffed with the results. Our PC is on the third floor and the router is in the ground floor, and we had a cheap usb network receiver plugged in which of 200mbps download gave us 20mbps in the usb2.0 port or 50mbps in the USB 3.0 port. As soon as I downloaded the correct driver from the Intel website for this network card it gave us the full 200mbps. I was honestly shocked. And I got it for £36 same day delivery from Amazon prime.
Thanks very much for the great video to give me the nudge to bite the bullet. Keep up the good work
thanks Luke, and so nice of you to get back to us with you own findings. That will help others that might think i am just being a shill 😂
@@mikesunboxing no problem. I think you came across very honest and unbiased which is why I bought it in the first place. Subscribing to your channel now 👍
@@lukeallington5393 Awesome! Welcome to the Channel 🙂
Can you share what driver you installed? 🙏🙏
Hi, Mike. My router is currently 5g. I'm paying for 150 Mbps down and 10 Mbps up. I just tested my wi-fi speed and was happy to see I'm getting 149 Mbps down, and 6.6 Mbps up. Besides the speed of your router and broadband connection, it's also important to set your MTU for the largest packet size your system can handle and set your DNS to a free fast DNS server. My MTU is currently set to 1470 and I'm using Cloudflare: 1.1. 1.1 & 1.0. 0.1 for my DNS server.
Thanks for sharing, i generally use 8.8.8.8 and 4.4.4.4, but i'll give cloudflare a go
@@mikesunboxing Okay, I believe that's Google's DNS.
@@mikesunboxing On my old SHUB 2 in router mode (don't know if it applies to later models) I find VM's default DNS is accelerated by local caching in the hub, and actually scores pretty well in Gibson's DNStest
Great video thanks Mike. Talking about Wi-Fi, the internet connection at my farm is really sketchy, so I moved the modem to the barn. Now I have stable wifi.
LMAO ! ! !
Where did the Wifi router go?
He went data way
Do u need a wired network for 5ghz still????
@@HOONICon I decommissioned most of my wired Ethernet network at home after getting a very good router with a good 5GHz Wi-Fi segment.
Nice review Mike. I currently use a hard line at home, but that might be very useful at work. Great review as always Mike and Kath. Take care, be safe. Cheers
cheers Rick! have a good day
Hi Mike, that looks like Cudy AX3000 Wireless WiFi 6E PCIe Card, Bluetooth 5.0, and with the INTEL AX200 Module in it I bought a few months back off amazon brilliant little card.
yes it does seem to be a huge increase in performance
Yes I bought a Archer AX3000E tp-link, it's great, works a treat.
Just rescanned my locality, there are about 5 networks (some multinode mesh) using 80MHz channel width on 36-48, and little me using 20MHz on CH100.
Everything defaults to the 36-48 range as that does not require DFS selection to avoid radar, so everything ends up on a single 80MHz channel. If you want clearer 5GHz, then in the VM Hubs it is called auto performance - auto compatibility lands you in the 36-48 scrum.
A bit like the mess on 2.4GHz (UK) where everything uses the US defaults of 1, 6, 11, but with UK allowing 1-13, a choice of 1, 5, 9 (NB. Microwave oven nominal centre frequency), 13 would be better, as well as allowing TWO 40MHz pairs of 1,5 and 9,13 - though in general, using 40MHz mode on 2.4GHz is antisocial and a lot of equipment should fall back to 20MHz if there is congestion - but some does not.
PS. You could test it harder by doing NAS transfer
lots of good info there, really should try and tune my setup more
Excellent review! Just purchased because of the thorough explanation 👌
Thanks :-)
Cheers Mike! Looks like a cracking little bit of kit. Love the heatsink. Much better than lots of the ugly green cheapo units :)
thanks and yes it looks a bit more heavy duty i think
I've ordered a Ubit AX210, not for the 6e because the PC is hard-wired to my router but for the BT5.2, upgrading from 4.2.
Mike!
Try & bridge the 2 LAN ports on a B550 Tom officially MSI say you can't (why put 2 LAN's on a motherboard then?) If it could be done that would be interesting to see if there is any gain in how much data you can download per second?
There is a bargain a the moment on flight sticks, it's worth looking at the Thrustmaster Airbus A320 it's going for less than the 1600M & has 2 triggers instead of 1 which is better for air combat, the software is a bit of a pain because of the switch underneath the base for left & right handed but so far it's worth a buy.
cheers will do
good review just went ordered one from amazon thanks
Hope you enjoy it!
Great video! Cheers.
I'm thinking of getting their cheapo WiFi 1200 Bluetooth 4.2 card, not because I need WiFi on my PC since it sits right next to the router so I use Ethernet but for reliable Bluetooth... Lots of reviews say it's decent.
this one seems good quality and faster than I expected so i would be happy to try their other devices
buy you other antennas for it-which ones with a long klabel then you can position the antennas better. I've also done that and lo and behold the speed is better. Am in the 5ghz wifi for it
Do I need to use Bluetooth cable if I already got Bluetooth adapter and no usb remaining on my motherboard.
yes you can leave it
I got one but only my Bluetooth works but the network adapter doesn’t
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
@@mikesunboxing I got it to work thanks I just had to install the drivers.
@@liquid_rose Glad to hear you got it working :-) Have a great weekend!
@@liquid_rosehey I know it’s been 2 years but how did you install the drivers
@ in the box, there is a website/code go to there website and download the drivers for your specific device
great tutorial for beginners
Glad you think so!
hi there can you please explain how to use the onboard wifi / bt on your motherboard , cant find any info regard the onboard devices.
what motherboard is it?
@@mikesunboxing ...... asus tuf gaming x570-pro wifi II
CRAP JOKE FRIDAY !!!!!
I steal my wifi from the sausage shop next door. To say its a poor service is an understatement, in fact its the WURST !
Hahahahahahahahahah
Not teewurst joke I've heard.
@@LordPoshnameVonPlumbingparts oh very good lol
Two wifi engineers got married.
The reception was fantastic.
I understand in Australian WiFi networks are called a LAN down under!
Hi Mike! I have a question, what if your motherboard already has an integrated wifi card already? Do you need to take it out before you insert a new one?
yes or disable it
Thank you, Mike and Kath. Just bought one for myself!
CharOriginalVids Thanks for the feedback! Please consider sharing the video and information on your social media, it really helps to get the message out there.
My cpu razen
will it work
yes it will
@@mikesunboxing and it good for games
Having trouble finding where to download the drivers. Don’t have a disk drive for the included disk.
try this page www.intel.co.uk/content/www/uk/en/products/sku/204836/intel-wifi-6e-ax210-gig/downloads.html
How do I download the drivers
there is a link in the video description
thank you good video!
Thank you too!
I just got a question do I really need the cable or can I just use it without the cable?
the cable is only for the Bluetooth
hi I have a question but then this wifi card is recommended to play?
it is good for gaming if that is what you are asking
@@mikesunboxing Thank you so much for answering me.😁👍🏻
@@Darknessome No problem :-)
Should I put the 9 pin usb header ok the usb 3.0?
usb 2.0 only
Is the driver disk necessary or will it work without it?
If you are on newer versions of windows 10 or 11 it should auto install
What happens if you don't use the USB plug.. can communications still take place through the pcie connector.. I don't understand why you need a USB connector when you already connected via pcie.....is the pcie just a mounting power prop?
USB is for bluetooth PCIe for ethernet / wifi
I'm in the market for my son, any suggestions Mike? Thank you for your help.
there are a few options, and really it will depend on what your router or mesh can do, no real point spending a ton of money on a wifi 6 or 6e card if the router can't support it. Ideally stick with an Intel chipset if you can, they seem to be more reliable and drivers are easy to get and install.
let me know more about your router setup and i'll see what i can find out for you
@@mikesunboxing thank you Mike for getting back to me. We might never have that info as it is going to be a University router.
Why does it require the use of a USB connection? I've never seen one require this before, it can't be for power, PCI provides that, or data either, is it just a Bluetooth thing?
yes the bluetooth is USB based
hi my friend ... i bought the same card but i can't get your performance ... i don't understand why ... 🤔
what internet speed to you pay for and what router do you use
@@mikesunboxing use Vodafone station
@@mikesunboxing I have the xg-c100c card and a 5,400MB wifi. then I have a Fritz Repiter 3000 and an Asus AX-82U router
How do you connect it to a network with no signal? I can’t download any drivers or updates without internet….. Do I use and Ethernet to set this up?
yes that is a good way or use the driver disk
How so u set it up?? Ive plugged it in but it doesnt glow and doesnt boost my wifi
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
How is a x1 PCIe slot going to transfer 5Gbps (like it says on the box)?..
Gen 3 x1 = 1GBps
Gen 4 x1 = 2GBps
Gen 5 x1 = 4GBps
My x1 slots are gen 3 so would bottleneck that 6e card a lot?..
If I put it in the longer slot would that help?.. Even tho the actual board is that short type?..
you are confusing gigabits small b and gigabytes big B that makes a huge difference in the theoretical speeds that can be obtained
@@mikesunboxing Ah I see:
5374 Mbps = 5.374 Gbps = 0.67175 GBps
Thanks.
I just installed this but the Bluetooth ( Intel Wireless Bluetooth ) is always showing in the ( safely remove hardware and eject media ) option in system tray ,which is very annoying.
Is it the same for you?
yes it does now for all Bluetooth adapters even my motherboards built in one
Got ethernet on my pc but thought i might use it for tethering will it work.
you might be able to use the internet connection sharing feature in windows but it isn't something i have tried myself
@mikesunboxing I'll see about ordering one and try it with windows mobile hot-spot
what do I do if my pcie is right on the edge of my brother board and the card won't fit because of that
it should fit? it is a universal slot?
@@mikesunboxing Idk it's wierd my thing won't fit cuz it's too wide and the pcie is so close to edge it's just a pcie slot the small one it fits but I have no room u get me? anything I can do?
@@tobyk3680 This is maybe easier to fix or at least advise if we can ask more questions/pics and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/gaeeDPw
I have a similar card same chipset fenvi I have a nighthawk router 6E Wi-Fi and I still can't see my 6ghz wifi I've tried several cards and routers still no luck
hmm not sure what is going on there, are you on windows 11? because it won't work on windows 10, it doesn't support it
Hello, I´ve bought the laptop version of this chipset (Intel(R) Wi-Fi 6E AX210 160MHz for M2 slot), installed proper drivers from Intel but it seems I cant´t find my Wi-fi at 6Ghz band, shared from my Samsung Galaxy S22+ . Main reason is to test my mobile 5G network and use its full potential. At 2,4 and 5Ghz works fine, somewhere I think I read it is not calibrated for 6Ghz yet and it can´t work with WPA3, only on Open network?
not sure sorry not something that i have tried or even considered doing
Quick question, if the usb header is specified as a front usb header, can it still be used?
yes it can
@@mikesunboxing thanks for the reply! Great to know!
@@MonkeyMan125431 No problem :-)
I bought an AX210 and it arrived today, can't get access to 6GHz, I'm on wifi6
6ghz is Wifi 6E - wifi 6 is 5ghz
Can you provide a link for the drivers needed for this to work?
Should be in the video description
i got mine and my pc is not detecting the wifi what do i do?
is there an unknown device in device manager?
@@mikesunboxing how do i check?
@@silvrchariot3254 This is maybe easier to if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Since I connect with my Ethernet directly this is useless for me correct ?
yes that is correct
@@mikesunboxing thanks I’ll also test it since I have a Wi-Fi 6E router that’s 1gb up and down and see what’s faster
do i need to install a driver?
windows should try and install one but if not yes you will
Can I use the secondary GPU slot for this?
yes you can
can you make a hotspot with this card?
i dont see why not
Does this card work with Linux?
Hey Hugh. It would appear that yes, this card will work with Linux.
as bob kindly said already they do seem to support linux
can it be used to create a 6ghz wifi network?
maybe, not sure though sorry
I’m getting 550 download on my phone and my WiFi dongle but after getting the card I’m only getting 130 download please help
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
@@mikesunboxingthank you
Mine does not light up nor work i just don’t know what could be wrong. Does anyone have any idea?
have you tried it in another slot? might just be a faulty unit though
that heatsink is overkill.
Better to have overkill than risk data packet loss or corruption
32 mbps on wifi and 36 wired - 35mbps fibre with shell
nice!
Can I buy this even if my wifi is not 6E?
yes it is backwards compatible with older and slower systems
Can I still upgrade to 6e if I have a onboard wifi6 motherboard?
yes you can, just disable the onboard or swap it out if the card on the board is removable
nearly £40 its not cheap but will hopefully drop in price in a few years
yes i hope so
Its still 40€, was even 50€ for a few weeks
I have 500mbps internet and I get all of it with one pc that has built-in wifi but I added one of these cards that only gets around 250mbps
is your router wifi 6E compatible, that might be holding you back
@Mike's unboxing, reviews and how to not sure but my other pc gets the full 500mbps connected to same router
currently sharing my 5ghz wifi with multiple people which makes it really annoying to play pcvr games on the quest 2.. will i be able to play pcvr games while connecting to this WiFi 6e without having to connect to my main router
if the games are offline maybe
@@mikesunboxing what do you mean, doesnt the hotspot mode transmit internet?
Does Richard Branson directly own that department of Virgin Media?
i don't think so, he is more of an asstronaut now
Put UNBOXING on the title if that's what the video is about. I was looking for info on the company and drivers sense new comps usually don't come with DvD drives anymore. Nothing about how to install if you don't have the DvD drive. Thanks for wasting my time.
i'm sure that was covered
thank you
You're welcome
the bluetooth works not the wifi can anyone help me?
This is maybe easier to fix or at least advise if we can ask more questions and get direct answers, so feel free to join our Discord chat and we can go over it in more detail discord.gg/XtBTGQ6BDu
Agree to the rules by clicking the emoji and you will get access to the rest of the Discord channels
Can anyone tell me if this works for Ryzen computers?
it will work on IBM PC compatibles running windows 7 or higher with a PCIe x1 slot. Intel or AMD
150 Mbits stated by Vodafone and 160Mbits am i actually recieving.
Get well soon
Try these drivers if you get problems www.intel.co.uk/content/www/uk/en/products/sku/204836/intel-wifi-6e-ax210-gig/downloads.html
THANKS
WELL FK
my motherboard GA-Z270-HD3 has the usb header far waaaaay from express port over the Gpu port either I need a a loong ass cable or a new motherboard
you can get extensions pretty cheap
Mine works like shit feel like I'm on dial up, I'm using my old core duo pc with 10 year old pci card way fast like more than double
is the case metal blocking the signal? try moving the pc to the side
How am I supposed to download the drivers if I can’t access the internet… literally the whole reason I bought the thing
windows 11 has them built in now as does the latest windows 10 builds, or at least that is what i have been told
Your case doesn't have enough fans. Please install some more.
good idea 😎
😂
it good for game
it is good for any netwrok tasks especially online gaming
Was anyone successful to even see 6Ghz SSID running Windows 10?
not me sorry
Support comment 🙂
You are the best
And kiss your PCI bus bandwidth goodbye.
yeah some lower end boards will suffer from that
@@mikesunboxing High end boards too if you run a 3090 with it.
god darnit dude. I have a 4080 with a MSI b500 gaming plus, will adding this fuck me over ??
thank you for this video, but could very more useful if we could understand what are you talking about ,because for non English citizens not have a clue what you are saying,could be nicer to try to explain more slowly and without the heavy English accent
thank you
sorry about that