Northern crankshaft in thief river falls mn, absolutely can make you a custom crankshaft to stick 2 banshee motors together. They have done crazy stuff in the past for arctic cat, like a 4 cylinder 2-stroke made from 2 big twins. Arctic cat insider 😉
Most mechanics/ engine builders don't like to share their work on vid , this knowledge and your tips and tricks help us more than u know. Watching ur process is like gold to a lot of us wanting to rebuild our own motor but are on the fence. It helps to see this on vid. U can tell when someone's done this hundreds of times u just take pieces,o rings and put em in a pile , not have to separate and label cause ur brain knows what it is and where it goes just by looking at it! Great stuff keep kit comin please
Rode one of his 4Mil builds once, back in the day... I'm an aerobatic pilot, and the thought of riding one of his 10 mils in the dunes scares the hell out of me!!! The power of the 4 mil was breathtaking...
I've always polished The shift works in the groove and the gears for the shift forks and even deburr the shift drum when I'm adding horsepower my quadzilla run seven flat at 97 and the eighth taking off in fifth of the drag strip you had to be careful you just barely bump it with your foot and it would shift gears. That has worked for me . Made 100 hp at the crank. Also we made 105 at the wheel on our kx500. Stock crank and ,bore. No porting. 41.5 electron carb. We figured this set up ran high nines in the 1/4 We held the land speed record stock class 127.5 mph at Bonneville that bike made 62.5 at the wheel.
Awesome video honestly I think you changed my mind going 421 4mil since you said you can get more power out of the stock cylinder than the driveline cylinder.i can’t wait to see the video of porting both the driveline and the stock cylinder.
What do you use to gauge the depth of the trench? You have some really great information in your video’s and it’s great to have a knowledgeable engine builder putting out correct information. Keep the videos coming.👍👍👍🤟✌️🙏🙏
I was wondering what you are dipping your burr in and why cause as soon as you squeeze the trigger whatever you dipped it in slings off so are you just trying to keep it cool or lubricant
@@herrjugsracing7816 you can always do a customer's part two...right? I'm going to pull the motor out of a used Banshee I bought and haul it to California (from Cabo).
I'm considering buying a 1997 banshee with a 2003 motor the owner described as a 521 10 mill rod billet crank pistons all new, 39mm carbs came as a kit and cost 5k. Chetta Cub cylinders, cool heads, FMF pipes, durable axles, work shocks over 10k invested. He's selling for 4k, but I told him 3.5k and he agreed. Need your expert thoughts on this purchase. I really trust in your channel from day #1. I asked did he have any documentation on the build he said yes, but hasn't revealed any. I asked if it was titled, he replied, "Yes", but hasn't shown me. He originally was selling it for 5k, then I guess no serious buyers, and he knocked it down to 4k. He's nonchalant with replying. I told him I will contact him back yesterday, after visiting my bank. He texted me at 7am to tell me are you coming, because I have to run off. I didn't respond... His demo picks aren't that clear, and the bike looks decent, but not shined to impress a true buyer. Please, give me your thoughts and comments, Sir....
@@donaldtate3372 well show up and find out what’s the deal regarding the title and build, best way to do it is face to face skip bs. Money talks bullshit walks. Either way I hope you find a Banshee, 👍.
@@Make-Asylums-Great-Again I agree vividly, but travel was a small factor too. I did it once, and the guy advised I could get the title from the previous owner after showing up. Like really, no can do with my payment and travel time again. Now, I stopped looking for a banshee. I saw a guy that's 3 hours from me selling his 2019 Yamaha Raptor 700 SE for $6500 CASH. He wanted more, but he advised the title is at the dealership. I advised him Friday I'll make the trip, but have the title. He agreed... I don't understand why people put something for sale, and you don't have all the documents needed up front. I'm going to request a photo of the documents to confirm, before making the trip this time.
Good video. Your just a bit more aggressive on the disassembly as I would be. I cringed a few times. Take your time and don't rush is what I was taught no matter how many times you've done it something can and will come back to bite ya if you rush. I understand the its for the video but good lord. PSA anyone looking to tear down an engine take this with a grain of salt. Hes done plenty from the looks of it but don't do this if it's your first time lol
I think I've watched just about every one of your videos learn so much!
Northern crankshaft in thief river falls mn, absolutely can make you a custom crankshaft to stick 2 banshee motors together. They have done crazy stuff in the past for arctic cat, like a 4 cylinder 2-stroke made from 2 big twins. Arctic cat insider 😉
Most mechanics/ engine builders don't like to share their work on vid , this knowledge and your tips and tricks help us more than u know. Watching ur process is like gold to a lot of us wanting to rebuild our own motor but are on the fence. It helps to see this on vid. U can tell when someone's done this hundreds of times u just take pieces,o rings and put em in a pile , not have to separate and label cause ur brain knows what it is and where it goes just by looking at it! Great stuff keep kit comin please
Glad to help
Rode one of his 4Mil builds once, back in the day... I'm an aerobatic pilot, and the thought of riding one of his 10 mils in the dunes scares the hell out of me!!! The power of the 4 mil was breathtaking...
Very excited to watch the rest of this build because this video was very educational!
I've always polished The shift works in the groove and the gears for the shift forks and even deburr the shift drum when I'm adding horsepower my quadzilla run seven flat at 97 and the eighth taking off in fifth of the drag strip you had to be careful you just barely bump it with your foot and it would shift gears. That has worked for me . Made 100 hp at the crank.
Also we made 105 at the wheel on our kx500. Stock crank and ,bore. No porting. 41.5 electron carb. We figured this set up ran high nines in the 1/4
We held the land speed record stock class 127.5 mph at Bonneville that bike made 62.5 at the wheel.
Good information.
Great information in this video! awesome!
Thanks!
Good to see you on yt! I’d love to send you my motor but I’m having too much fun blasting around town! Keep up the good work 👍
Awesome video honestly I think you changed my mind going 421 4mil since you said you can get more power out of the stock cylinder than the driveline cylinder.i can’t wait to see the video of porting both the driveline and the stock cylinder.
Dewalt for the win! Jajaja nice video! Can't wait to see the build up
Just Subscribed!!
Thank you, I must say I don’t put up as much video as I should. Follow me on FB and IG for daily content.
@@herrjugsracing7816 I will!!
Great video!! Let me tell u,,u have a natural talent for videos...u have lots of potential in youtube kevin.. I hope u continue ✌
Thank you so much!
Believe it or not I wouldn't throw those stock pipes away people are looking for them to build a OEM original bike.
Thanks, I know now. I've been tossing them since 1988. That was my first new off the floor Banshee buy.
You can sell a $20,000 Banshee in 5 more years, especially all stock/museum quality. Watch.
@@cxbra nobody paying $20k for stock banshee
Keep doing videos your the best 💪🏽🤟🏽🤟🏽
Thank you! Will do!
I remember the banshee in the thumbnail. That was a bad bitch
I remember you as a kid ripping around camp all day long. You never wanted to stop riding.
What do you use to gauge the depth of the trench? You have some really great information in your video’s and it’s great to have a knowledgeable engine builder putting out correct information. Keep the videos coming.👍👍👍🤟✌️🙏🙏
This is gold !!!!
How can I get my banshee to you?. I want some motor work.
right here herrjugsracing.com/
All I can say it wow!
Man awesome video
Appreciate it!
I was wondering what you are dipping your burr in and why cause as soon as you squeeze the trigger whatever you dipped it in slings off so are you just trying to keep it cool or lubricant
It is water. it acts as a cooling and lubricant for the aluminum I'm cutting on.
How do u cut that nikasil like that
Carbide and diamond cutters.
@@herrjugsracing7816 I must have the wrong diamonds 😂😂mines just will scratch it
@@2WildRazn Cut with the carbide and finish with the diamond burs.
Snap ring pliers @5:50?
Didn't follow this question. Trying to start the bike at 5:50
You said 64 as original stock size for the piston
No, he meant as in the length of the stroke with the new 10mil crank
Is she still for sale? @HerrJugsRacing ?????
Anything I put up for sale is gone within days.
Is there gonna be a part 2?
Sadly I got so busy and didn't get the video before the customer picked it up.
@@herrjugsracing7816 you can always do a customer's part two...right? I'm going to pull the motor out of a used Banshee I bought and haul it to California (from Cabo).
I wanna do a good port on my oem cylinder of my banshee send me info to send you the parts
Do you have anywhere to talk to you I have questions about my banshee
Email me at kev@herrjugsracing.com
We are all not as good as u are can't go that fast. We need to put things in order and lable... slow it down for some of us plz...
I wish I had more time to do these videos. I will work on that.
300 kicks with the gas off
I'm considering buying a 1997 banshee with a 2003 motor the owner described as a 521 10 mill rod billet crank pistons all new, 39mm carbs came as a kit and cost 5k. Chetta Cub cylinders, cool heads, FMF pipes, durable axles, work shocks over 10k invested. He's selling for 4k, but I told him 3.5k and he agreed. Need your expert thoughts on this purchase. I really trust in your channel from day #1. I asked did he have any documentation on the build he said yes, but hasn't revealed any. I asked if it was titled, he replied, "Yes", but hasn't shown me. He originally was selling it for 5k, then I guess no serious buyers, and he knocked it down to 4k. He's nonchalant with replying. I told him I will contact him back yesterday, after visiting my bank. He texted me at 7am to tell me are you coming, because I have to run off. I didn't respond... His demo picks aren't that clear, and the bike looks decent, but not shined to impress a true buyer. Please, give me your thoughts and comments, Sir....
Why did you waste the sellers time?
@@Make-Asylums-Great-Again I asked if it was titled, he replied, "Yes", but hasn't shown me. He wasted the potential buyers time... "ME".
@@donaldtate3372 well show up and find out what’s the deal regarding the title and build, best way to do it is face to face skip bs. Money talks bullshit walks. Either way I hope you find a Banshee, 👍.
@@Make-Asylums-Great-Again I agree vividly, but travel was a small factor too. I did it once, and the guy advised I could get the title from the previous owner after showing up. Like really, no can do with my payment and travel time again. Now, I stopped looking for a banshee. I saw a guy that's 3 hours from me selling his 2019 Yamaha Raptor 700 SE for $6500 CASH. He wanted more, but he advised the title is at the dealership. I advised him Friday I'll make the trip, but have the title. He agreed... I don't understand why people put something for sale, and you don't have all the documents needed up front. I'm going to request a photo of the documents to confirm, before making the trip this time.
@@donaldtate3372 you made the right call screw that. 👍
Good video. Your just a bit more aggressive on the disassembly as I would be. I cringed a few times. Take your time and don't rush is what I was taught no matter how many times you've done it something can and will come back to bite ya if you rush. I understand the its for the video but good lord. PSA anyone looking to tear down an engine take this with a grain of salt. Hes done plenty from the looks of it but don't do this if it's your first time lol
Its true. I did it fast for the video. I have done 1000s over the years. Take your time.
@@herrjugsracing7816 thats exactly what I was thinking. Definitely looked like you had your hands on a few banshee engines before lol.
20:40 story of my life
Drink everytime he says cub or 10mill
If you want to get really drunk.