its a really nice cart though. you can never compete with a Chinese factory where they pay workers slave wages. many American workers have found this out the hard way.
Remember you can buy a chair cheaper than it costs to make a chair. Both serve the same but the one you build is worth so much more. Hey you designed something and built it. Keep going your builds are fantastic and an inspiration.
I was wondering how to carry a cart up the stairs a few weeks ago, so your video came at a great time. You're such a skilled craftsman, really impressive
And because when he makes something himself there is more appreciation from him and the built item will be more useful last longer as these days you buy something but others using it as well so they show less appreciation because they didn't buy it and it doesn't last long.
Yes, I totally agree with you on that one. Our children's generations are getting so used to a disposable economy. It is really sad. I was taught as a child that when you use something (borrow) that belongs to someone else, it should always be returned at least as good as when it was given to you to use. @@billyblackie9417
@@Krislauer I was raised that way also, however, have you noticed that in todays time not even the adults seem to care? How sad we have turned into such a wasteful, uncaring and unappreciative society. I loaned someone something not long ago that was almost new, when it came back to me it was in pieces. They didn't even offered to pay for the damage and got insulted when I asked them to! Go figure. :(
@@lady_id.dixiet_dixt Yes, I have noticed that. I think some of the reason for that is based on exasperation regarding the whole situation. Some people figure that if nobody else cares, why should I. The other problem that comes to mind was, I once borrowed a glass casserole dish from a neighbor and when I was done with it. I scrubbed it clean! It was a well-used dish and had a lot of baked on spots. I gave it back to the neighbor and she looked displeased with me but said thank you and went inside. A couple of days later I asked if there was something wrong and she finally admitted that I embarrassed her for cleaning it so well. Like she didn't clean it good enough. I felt really bad and explained how I was brought up. She relented and accepted my apology. The next time I asked to borrow it, she smiled and said only if I don't make it spotless again.
@@Krislauer Yes, there will always be that other side of the coin but regardless, I am so thankful I was raise in the era of , "yes please and no thank you". With that being said, thank you for your story, it brought a much needed smile to this old woman's heart.
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro, un carro muy original y peculiar, gracias por compartir sus conocimientos y experiencias, un cordial saludo y por supuesto un merecido like desde Narón (Galicia)👍🤓😜
I enjoy watching your videos, Your workmanship is always so precise, neat and clean it's a real joy. Thank you so much for sharing your woodworking journeys with us and looking forward to the next adventure.
안녕하세요 Dekay, 이 번역을 읽어보시길 바랍니다. 저는 캐나다 출신이고 한국어를 말하거나 쓰지 않습니다. 나는 당신의 작업을 매우 좋아합니다. 저 카트 정말 이쁘게 나왔어요. 의도한 대로 작동하는 것 같습니다. 당신은 디자인에 많은 재능을 가지고 있고 나는 그것을 내 자신을 위한 무언가를 만드는 데 사용했습니다. 계속해서 영상을 만들어주세요. 나는 그것들이 재미있고 유익하다고 생각합니다. 잘 지내세요
It's easy to overlook for many people who haven't done it for themselves, but unless it's designer furniture etc it's always cheaper to buy something mass produced than making it yourself.
Tbh, if I have tools and ability to build I rather build one than simply buy because you can customize it for personal use and add more features to it. Many things today they use cheap parts with cheap skill, causing item to easily damage just to buy another new one. Of course, it also depends on what kind of item though, not all things must DIY.
my friend, for your own safety, can I propose an "accesory"... please add an emergency break... if you are half way down the stairs and feel you took on too much you want the wheels to stop.
I feel like the handle bar will be annoying if you're going up a whole flight of stairs. The way it will bend towards the stairs rather than away from them. Hopefully I'm wrong though, but just a thought
국내에서 판매되는 저 제품도 중국산이고 저 제품은 베어링도 없고 바퀴가 작아서 높은턱엔 유용하지 않은 제품입니다. 계단카트는 바퀴가 커야 계단오르내리기 편하니 바퀴가 큰제품 그리고 바퀴에 베어링이 들어가 있는제품으로 구매하세요 어짜피 고가 전동 제품 아니면 다 중국산 입니다 . 전 120kg 내구성 8만원짜리 잘쓰고 있습니다 10만원 넘어가는 제품군인데 다 똑같고 잘 찾으면 8만원대 있으니 돈들 아끼시길ㅋ PS) 수제 카트는 너무 멋집니다 ^^
Hello May not be used to introduce my work I do short videos... Or clips.. Sometimes the way I do your items. The plywood is it the same in Korea The weight... You carry the furniture easy.. Do you know France or touring Paris? I presume to be humorist Woodcraft is so serious'
I like the idea you designed and made this tool from wood, however that is it's main problem. There is a weak area at the pivot point of the bed that will eventually snap at the hole. I speak from experience having used one of the steel versions here in the UK and the strain at that joint is incredible and resulted in the whole thing being bent out of shape by an idiot who decided to carry a very heavy load up 3 flights of stairs. Shame really because I wanted this to be a success. Maybe if you tried it with a heavier load and higher steps and reinforce any weak spots you identify it will still work for you.
![[SUB] Ultimate Stackable ideas l trolley table for pet l CNC works l woodworking](http://i.ytimg.com/vi/VpYb94xXsn4/mqdefault.jpg)
인건비 태우면 20만원 ㅋㅋㅋ
댓글로 뼈때리기 있어요?
죄송해요
cnc 가공비도 뺐네요
십만원 추가요 ㅋㅋ
아 ㅋㅋㅋㅋㅋㅋ
내가 만든 내꺼 세상유일한 내꺼 좋잖아요
its a really nice cart though. you can never compete with a Chinese factory where they pay workers slave wages. many American workers have found this out the hard way.
Remember you can buy a chair cheaper than it costs to make a chair. Both serve the same but the one you build is worth so much more. Hey you designed something and built it. Keep going your builds are fantastic and an inspiration.
김팀장님 디자인 예술성 손기술 탑 클라스 시네요.
교수급 아티스트입니다.
Dekay you are a great designer and artist making great projects out of wood and making it easy for people
마지막 씁쓸한 표정이 지워지지않네요…
김팀장님의 메카니즘은 끊이지않는 마력이 있어요…
항상 응원합니다…
그나저나 제무시도 예쁘네요..
고맙습니다 ^^
I was wondering how to carry a cart up the stairs a few weeks ago, so your video came at a great time. You're such a skilled craftsman, really impressive
아... 허탈함이 절절히 느껴지네요! 원래 철제보다 목재가 뭐든 비싼 법 아니겠습니까!!! 나무가 주는 감성이 또 일품이고요~
솜씨가 부럽습니다. 저도 요즘 들어 목공을 배울 껄 했나 싶네요 ㅠㅠ
아직 늦지 않았어요!!
I love your design. I wld build it for myself rather than buy one. You are very inspirational to me. Thank you for your videos.
I really like your design. Being able to create abbreviated build is better than buying because you did the work and gained the benefit! 😊
And because when he makes something himself there is more appreciation from him and the built item will be more useful last longer as these days you buy something but others using it as well so they show less appreciation because they didn't buy it and it doesn't last long.
Yes, I totally agree with you on that one. Our children's generations are getting so used to a disposable economy. It is really sad. I was taught as a child that when you use something (borrow) that belongs to someone else, it should always be returned at least as good as when it was given to you to use. @@billyblackie9417
@@Krislauer I was raised that way also, however, have you noticed that in todays time not even the adults seem to care? How sad we have turned into such a wasteful, uncaring and unappreciative society. I loaned someone something not long ago that was almost new, when it came back to me it was in pieces. They didn't even offered to pay for the damage and got insulted when I asked them to! Go figure. :(
@@lady_id.dixiet_dixt Yes, I have noticed that. I think some of the reason for that is based on exasperation regarding the whole situation. Some people figure that if nobody else cares, why should I. The other problem that comes to mind was, I once borrowed a glass casserole dish from a neighbor and when I was done with it. I scrubbed it clean! It was a well-used dish and had a lot of baked on spots. I gave it back to the neighbor and she looked displeased with me but said thank you and went inside. A couple of days later I asked if there was something wrong and she finally admitted that I embarrassed her for cleaning it so well. Like she didn't clean it good enough. I felt really bad and explained how I was brought up. She relented and accepted my apology. The next time I asked to borrow it, she smiled and said only if I don't make it spotless again.
@@Krislauer Yes, there will always be that other side of the coin but regardless, I am so thankful I was raise in the era of , "yes please and no thank you". With that being said, thank you for your story, it brought a much needed smile to this old woman's heart.
Quality does not show in an ad. I appreciate your builds.
감사합니다 따라 만들려고 도면 치다가 영상 끝까지 보고 7만원짜리 구매 선택 했습니다!!
현명하시군요!!
Excelente proyecto muy bien desarrollado y mejor ejecutado maestro, un carro muy original y peculiar, gracias por compartir sus conocimientos y experiencias, un cordial saludo y por supuesto un merecido like desde Narón (Galicia)👍🤓😜
I enjoy watching your videos, Your workmanship is always so precise, neat and clean it's a real joy. Thank you so much for sharing your woodworking journeys with us and looking forward to the next adventure.
저는 더 좋습니다
목공하는 사람으로서 나무로 뭐든지 된다는걸 보여주시니 오히려 무한한 가능성이 느껴지네요👍👍👍
고맙습니다 😍
Franchement, je trouve que ça soit en bois ou en métal, ils ont une utilité différente et l'on remarque plus celui qui est en bois 👍🥰
Great to see you speaking Sunbae 👍🏻✌🏻👊🏻💪🏻
역시 김팀장 화이팅~~~
또르륵 ㅜㅜ
또르르르르르륵 ㅠㅠ
안녕하세요 Dekay, 이 번역을 읽어보시길 바랍니다. 저는 캐나다 출신이고 한국어를 말하거나 쓰지 않습니다. 나는 당신의 작업을 매우 좋아합니다. 저 카트 정말 이쁘게 나왔어요. 의도한 대로 작동하는 것 같습니다. 당신은 디자인에 많은 재능을 가지고 있고 나는 그것을 내 자신을 위한 무언가를 만드는 데 사용했습니다. 계속해서 영상을 만들어주세요. 나는 그것들이 재미있고 유익하다고 생각합니다. 잘 지내세요
고마워 친구 ❤
한국에서 Woodworker라고 할 수 있는 유일한 김팀장님.. 잘 보고 갑니다..
좋게 봐주셔서 고맙습니다 ^^
Ich verstehe dich nicht aber du hast tolle Idee! 👍🤝🙋♂️
ㅎㅎ 기성품보다 더 이쁘다고 생각하고 봤는데 이런 반전이~ㅋㅋ
근데 후기 보니 기성품도 무거워서 못 쓴대요 ㅋㅋ
In English we say “great minds think alike!” Even if someone else also created it, your ingenuity is still impressive.
فنان ومبدع تحياتي.
김팀장님 준비된 부품들
합체 시킬때
마치 로봇합체 처럼
설레였다? 안설레였다?
하하핫❤
Nice work.,I really appreciate your dedication
역시 목공을 하면 할수록 느끼는건 사서쓰는게 최곱니다.😂
맞아요 취미삼아 하긴 하지만 현타 세게 왔어요 ㅋㅋㅋ
목공예가들은 대개 자신이 만든 것을 구입할 수 있습니다. 즐거움은 바로 만들어지는 것입니다! 그리고 폐목재를 사용할 수 있다면 비용이 절감될 것입니다. 아무튼 보는 재미가 쏠쏠했습니다. 👍
ㅋㅋㅋ ^^ 엔딩 좋네요~
ㅋㅋㅋㅋㅋㅋㅋ
언제나처럼,완벽한 작업! 인사말 러시아에서🇷🇺🤝
고마워 친구❤
베어링이 없어도 잘 돌아가네요 ㅎㅎ
공방은 소음이나 비용 때문에 지하에 있을 수 밖에 없는데 카트 유용하겠네요
훌륭한 아이디어와 실행, 베어링과 금속 소켓을 추가하면 수명을 크게 연장할 수 있어요 :)
Your projects are great and car blow my 🤯
그래도 훌륭했어요 잘보고 갑니다
Excellent technological solution
Good Stuff
DeKay: I love your designs and creativity. Do you have plans for this cart, that you are willing to share or sell?
Eres un gran maestro.
Пролетарское спасибо. 🤝🇷🇺
현타 온것 같은 표정...이번 영상중 압권이였습니다..ㅎㅎㅎㅎ
ㅎㅎㅎㅎ ㅠㅠ
이런 제품 많이 팔던데 직접 만들다니 대단하시다.... 했는데 영상을 보다 판매하는 줄 모르고 만들었다는 사실을 알게 되었네요 ㅎㅎ;; 그래도 나름 유니크하고 이쁘니 괜찮지 않을까요.
고맙습니다~~
Brilliant work, but for that amount of Baltic birch I can simply buy a cart😂
핀터에보면 자동으로 계단을 오르는 버젼도 있어요ㅎㅎ
저는 허접 목공 해왔는데 따라쟁이 해볼래요~~~
기성품보다 이쁘니까 괜찮음 ㅎㅎ
사장님 알리 익스프레스의 세계로 빠져 봅시다
많더리고요...
반성하고 있습니다 ㅠ
목공유투버 답게 우와 저걸 나무로 ㅇ안드시다니 대단하다 했더니 검색을 안해봐서...😂
ㅠㅠ
It's easy to overlook for many people who haven't done it for themselves, but unless it's designer furniture etc it's always cheaper to buy something mass produced than making it yourself.
김팀장의 유머 한스푼! ㅋ 😂
Dat soort transportwagens gebruikten we in Nederland al in de jaren 80, niks nieuws onder de zon zogezegd.
Dude is good.
Put those wheels on the Milwaukee box. Make it better
Bel lavoro
Muito bom! 👏👏👏👏
See you soon man! Don't be late again
Ok thanks =)
where are man? Long time no see, really we missed you and your amazing creations
바퀴가 더 고급으로 보이네요. 훨씬 훠얼씨이인 고급일겁니다. 아마도?
그래도 만든거 치고는 쓸만해보입니다.ㅋ
Do you have plans availble for this for sale?
👍🏼✌🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
👏👏👏👏👏👏👏👏👏
예전에 업로드 돼서 봤던 영상 같은데..새로 올리신건가.?
브이로그 채널에 잘못 올려서 옮겼어요 ㅠㅠ
우리가게손님들 이거 많이 끌고오는데..더 작은모델도 많이봤습니다 근데 님이 만든게 훨씬 이쁘기는합니다 감성카트
고맙습니다~~
Excelente video, hágame el favor podría regalarme las medidas
😁👍
What kind of CNC do you have?
asphire3 =)
Tbh, if I have tools and ability to build I rather build one than simply buy because you can customize it for personal use and add more features to it. Many things today they use cheap parts with cheap skill, causing item to easily damage just to buy another new one.
Of course, it also depends on what kind of item though, not all things must DIY.
😍😍❤️❤️
아 ...검색좀 열심히 해볼껄 ;; 명언입니다.
my friend, for your own safety, can I propose an "accesory"... please add an emergency break... if you are half way down the stairs and feel you took on too much you want the wheels to stop.
카트가 엄청 무겁겠어요..ㄷ
무게는 가벼운데 턴이 안되고 딱히 뭐 그냥 그렇네요 ㅎㅎ
@@dekayscrafts 제자리 조향이여? 될것 같은데여
@@ninawara0007 바퀴 두개가 맞닿아 있어서 억지로 꺾어야돼요 드드득 하면서
@@dekayscrafts 아 그러네요 ㅋㅋㅋㅋㅋ
이 작품은 우드로 수작업 이니깐 돈으로 따질수 없지만
굳이 돈으로 따진다면야 대략 50 정도 될듯한 작품 이군요.
Muito bom, parabéns! 🇧🇷
아따 잘생겼다~~~ 말도 잘하고~~`
❤
👍👏🤩💝
ㅎㅎㅎㅎㅎㅎ
🇧🇷
I feel like the handle bar will be annoying if you're going up a whole flight of stairs. The way it will bend towards the stairs rather than away from them. Hopefully I'm wrong though, but just a thought
👏👏👏
근데 철재라 너…무 무거워요 ㅠㅠ 나무가 더 좋아보여요 ㅎ
다시보니 철재가 평이 안좋긴 하더라구요
고맙습니다~
Passar as medidas Brasil Pernambuco garanhuns
ㅋㅋ 저거원래있었는데
그르게요 ㅋㅋ
마그나 카트라고 코스트코 카트로 유명한건데 이건 접히기까지 하는데 4만원이요...
트레이더스에서도 팝니다...
ㅠㅠ
국내에서 판매되는 저 제품도 중국산이고
저 제품은 베어링도 없고 바퀴가 작아서 높은턱엔
유용하지 않은 제품입니다.
계단카트는 바퀴가 커야 계단오르내리기 편하니
바퀴가 큰제품 그리고 바퀴에 베어링이
들어가 있는제품으로 구매하세요
어짜피 고가 전동 제품 아니면 다 중국산 입니다 .
전 120kg 내구성 8만원짜리 잘쓰고 있습니다
10만원 넘어가는 제품군인데 다 똑같고
잘 찾으면 8만원대 있으니 돈들 아끼시길ㅋ
PS) 수제 카트는 너무 멋집니다 ^^
ㅎㅎ 고맙습니다~~
저런그 써봤는데 좌회전 우회전이 힘듬 사장된거눈 다이유가있음
맞아요 턴이 안되더라구요... 만들고 보니 구조상 안될 수 밖에
이미 나와있는 제품을 모델로 한게 아닌가;..
이미 있는 걸 몰랐어요 ㄷㄷ
Hello
May not be used to introduce my work
I do short videos... Or clips.. Sometimes the way I do your items.
The plywood is it the same in Korea
The weight... You carry the furniture easy..
Do you know France or touring Paris?
I presume to be humorist
Woodcraft is so serious'
시작할때부터 "있는 제품을 왜 굳이 만들지? 바닥 더 크게 쓰려고하나"라는 생각이 들었는데..
그러게 말이에요 ㅠ
링크좀....
I like the idea you designed and made this tool from wood, however that is it's main problem. There is a weak area at the pivot point of the bed that will eventually snap at the hole. I speak from experience having used one of the steel versions here in the UK and the strain at that joint is incredible and resulted in the whole thing being bent out of shape by an idiot who decided to carry a very heavy load up 3 flights of stairs.
Shame really because I wanted this to be a success. Maybe if you tried it with a heavier load and higher steps and reinforce any weak spots you identify it will still work for you.
ㅋㅋㅋㅋ안쓰면 나줘
ㅋㅋㅋㅋㅋㅋㅋㅋ
중국산 기성제품이 세빠따로 많이 있는걸 굳이 왜??? 10년전에 중국애들이 자주 쓰던겁니다 지금 중국애들 수레도 다 전동 수레씁니다
아 그래요? 안써봐서 마냥 좋아보였어요
실제로 사서 써보면 내구도가 그렇게 좋지가 않아서 그냥 창고에 자리 차지하고 있네요
무게도 엄청 무겁다더라구요 흥행하지 못한 이유가 있었어요