I have an intermittent problem with mine where the output sound wasn’t coming from when the crossfader was set to A or B, I could hear the sound in the headphones but it would only come out of the master output when I set the crossfader assign to Thru. I left the laptop for 10 mins and it fixed itself so you have any ideas what this maybe
Wzup Doctor C, im not sure, but does your sx3 have a black dot next to the serial number. Check out this link for context. www.pioneerdj.com/en/support/important-product-notice/ Also, does the issue occur on another computer?
Great tips, can you help as I'm searching for a video to help me get the buttons to color up again. Everything works on the DDJ SX3, but I updated my Mac OS and now cue lights, hot cues and FX buttons don't light up. I updated Firmware and Drivers, and no luck.
Wzup Firoz D, thanks for checking out the video. I may be able to help, but I have a few questions. -On the bottom of your SX3 does it have a "black circle" next to the serial number? -What version of MacOS did you update to? -Have you tried it on another PC/Mac? Thanks.
@@fdudha When you first power on the SX3 or in demo mode does it cycle through the colors...Also, check out this site it may help support.serato.com/hc/en-us/articles/203189300-Troubleshooting-Connection-Issues-on-macOS I would still suggest trying it with another computer to isolate the issues but hopefully, the link will help. Best of luck.
Wzup DJ Raw, yes the CDJs should work standalone via rca. But, if you would like to control serato with them, I believe you will need the DVS expansion (and timecode cd or mp3) from Serato which runs $99. Alternatively you could do the subscription but it might not be a good long term solution. Hope that helps you make a decision.
Wzup Sunnie RockReady, the lag adjust will reduce/increase the cut-in distance. Setting the crossfader to the lowest value will require the least amount of movement to active the deck audio. Hope that was helpful...
@@gatekeeper1193 Wzup Scotty, there could be a couple issues that may be causing the problem. I believe you are on to something when you mention the volume jumping and distortion which indicates clipping. Are you comfortable with setting gains? If so, do you mind checking a few things for me? In Serato setting do you have auto gain checked (also what db). Are your tracks normalized? If you have a video and able to upload to YT and share the link. Be mindful of copyright songs to prevent strike but I would like to see and hear what is happening. Thanks
@@XFaderz hey thanks for the response I’ve never loaded anything on YT I use SoundCloud yes I’ve adjusted my gains and master it’s that master volume in serato that jumps back up when connected to my system
I was able to get mic input 2 to be seen as pcm input channel 7-8 instead of going through main out and pcm monitor channel (9-10). This setting is done after you turn on the sx3 and I think turn on of software that puts it into serato mode (like serato). But I have forgotten the sequence :-(. I think it was something like holding shift and USB A button and then sliding the input button from USB A to mic input. This means you can have mic input 2 processed by software (vocoders, echo or whatever you want to do) before you send it out. I have held multiple meetings like this, using input channel 7-8 and output channel 9-10 for meetings and use the remainder for the DJ software. Meetings are a lot better when using a dynamic microphone ;-).
Iv jus got an Sx3,i dont know its full capabilities yet but its a work in process,thanx X-fader!
liked & subbed btw
Wzup Jade, congrats on the new gear. Have Fun and Enjoy👍.
Clear and concise! Thank-you!
Just got my sx3 I need this video.. thanks
Wzup, congrats on the new gear, glad to hear this video was helpful. Thanks for the feedback.
Thank you SO MUCH for this video!
Nice thanks my Dj bro
Can you share the settings for scratching
I have an intermittent problem with mine where the output sound wasn’t coming from when the crossfader was set to A or B, I could hear the sound in the headphones but it would only come out of the master output when I set the crossfader assign to Thru. I left the laptop for 10 mins and it fixed itself so you have any ideas what this maybe
Wzup Doctor C, im not sure, but does your sx3 have a black dot next to the serial number. Check out this link for context. www.pioneerdj.com/en/support/important-product-notice/ Also, does the issue occur on another computer?
Hello, how to change the samplers pad color
Great tips, can you help as I'm searching for a video to help me get the buttons to color up again. Everything works on the DDJ SX3, but I updated my Mac OS and now cue lights, hot cues and FX buttons don't light up. I updated Firmware and Drivers, and no luck.
Wzup Firoz D, thanks for checking out the video. I may be able to help, but I have a few questions.
-On the bottom of your SX3 does it have a "black circle" next to the serial number?
-What version of MacOS did you update to?
-Have you tried it on another PC/Mac?
Thanks.
@@XFaderz Yes Black Circle made with sharpie.
@@fdudha When you first power on the SX3 or in demo mode does it cycle through the colors...Also, check out this site it may help support.serato.com/hc/en-us/articles/203189300-Troubleshooting-Connection-Issues-on-macOS I would still suggest trying it with another computer to isolate the issues but hopefully, the link will help. Best of luck.
plz what camera do u use?
We're is a hands on DJ class I have a ddj sx3 also
Just buy one ... don’t even use it yet bc I send it to Jamaica soo I’m waiting till I get to to use it
Is it possible to connect 2 cdj 1000mk3 to my ddj sx3, want to purchase some cheap , but not if they won't connect to my ddj sx3
Wzup DJ Raw, yes the CDJs should work standalone via rca. But, if you would like to control serato with them, I believe you will need the DVS expansion (and timecode cd or mp3) from Serato which runs $99. Alternatively you could do the subscription but it might not be a good long term solution. Hope that helps you make a decision.
Very good video. Well Done!
So how to reinitialize it ?
? why do I hear the next song when the other side is playing
What exactly does the lag adjustment help with. Thanks
in advance
Wzup Sunnie RockReady, the lag adjust will reduce/increase the cut-in distance. Setting the crossfader to the lowest value will require the least amount of movement to active the deck audio. Hope that was helpful...
@@XFaderz thanks bud!. Much appreciated
Hi thanks for the time I’m having problems with my volume jumping up and down while recording causing a crackling sound in my sets can you help
@@gatekeeper1193 Wzup Scotty, there could be a couple issues that may be causing the problem. I believe you are on to something when you mention the volume jumping and distortion which indicates clipping. Are you comfortable with setting gains? If so, do you mind checking a few things for me? In Serato setting do you have auto gain checked (also what db). Are your tracks normalized? If you have a video and able to upload to YT and share the link. Be mindful of copyright songs to prevent strike but I would like to see and hear what is happening. Thanks
@@XFaderz hey thanks for the response I’ve never loaded anything on YT I use SoundCloud yes I’ve adjusted my gains and master it’s that master volume in serato that jumps back up when connected to my system
I was able to get mic input 2 to be seen as pcm input channel 7-8 instead of going through main out and pcm monitor channel (9-10).
This setting is done after you turn on the sx3 and I think turn on of software that puts it into serato mode (like serato).
But I have forgotten the sequence :-(.
I think it was something like holding shift and USB A button and then sliding the input button from USB A to mic input.
This means you can have mic input 2 processed by software (vocoders, echo or whatever you want to do) before you send it out.
I have held multiple meetings like this, using input channel 7-8 and output channel 9-10 for meetings and use the remainder for the DJ software.
Meetings are a lot better when using a dynamic microphone ;-).
230🔥🔥🔥🔥
Is Giveon doing this tutorial? Lol