I've become quite the fan of the 25k and 28k blue T238 brushless motors. Recently did a build of 13:1 short 4 teeth with an m110 spring, using the 25k blue T238 brushless. It is snappy and 24rps, and a whole game day of over 6k rounds used only around 800mAh!
Can you make a vid of how to install a mosfet in a KWA EVE 9? I might get one soon and I want to know what the best one is and how to install, I'm new(ish) to airsoft so would it be worth it having a tech install it?
We all know by now that brushless is superior so why not compare T238 with other brushless ones like warhead, solink and such and to see how the motor communicates with other mosfets and not just the t238 etu/mosfet
I’ve got a t238 motor in one of my guns with a Zion Nebula ETU it works fine. The start up beep sounds a lil funkier, also lowered the speed knob because it was spicier than I needed. Haven’t tried with a Perun ETU yet but I bet it’s fine
@@mineralwater25 definitely was plug and play (besides adjusting motor height) I’ve used it in several matches, so far so good 👍 I haven’t tried the new nebula that has more settings for braking and pre-cocking etc. but just the older one with just fire mode settings. Btw if your ETU isn’t already installed make sure to put the selector plate on 1st! If not you can break the lil switch that detects fire mode. (Ask me how I know lol)
Can't wait to see the minigun build, we do have gelblaster conversations here but they are like $1500aud so stupid expensive but really cool, Brent Alderton who owns azraels armoury had had for a few years now and the run it off and 4500psi air tank 😅 goes pretty good 😅 they also imported a dd4 and put a leviathan twin apache's brushless motor the full bit and that thing's insane but they want 3.5k for it but it is a 1 of 1 and i highly doubt that you would even see a stock one in the country
I just got the 37k QRBLS motor and it's going into my slr b15 gel blaster with a cyma platinum gearbox ,Bizarrely im getting 24rps with a shs hitorque and standard gearing so im keen to see how much that jumps after swapping to the 37k brushless, i don't know if my chrono is playing up or if it's got something to do with the 3s 11.1v 720mah 100c 200c burst drone lipo but i can't complain 😊
@wyshtechairsoft 29rps now with the cyma platinum gearbox stock internals besides the m130 aztech brown viton oring t238 v14.2 etu and cause i put a ssc maxim defense scw pdx stock on my multicam dytac slr b15 running a gaoneng 11.1v 3s 720mah 100c 200c high discharge drone battery ,had to take the outer head wrap off, no fuse and use a xt30 plug but it fit's nice and neat in the tiny buffer tube
Nah. generally mosfets use pwm to lower rps. Brushless motors have their own controller and need a constant voltage. Using rof control is a good way to ruin your fancy new motor. The rpm adjustment on the other t238/infinity motors is mostly a gimmick imo. You lose alot of trigger response the more you turn it down.
If you did want to lower your RPS the dial on the T238 works well and can be fine tuned. Lowing RPS with a mosfet is more for brushed motors. The brushless motors built in ESC might get confused and do low voltage protection if the ETU wasn’t giving all the juice
I've become quite the fan of the 25k and 28k blue T238 brushless motors. Recently did a build of 13:1 short 4 teeth with an m110 spring, using the 25k blue T238 brushless. It is snappy and 24rps, and a whole game day of over 6k rounds used only around 800mAh!
Good love the efficiency of brushless motors!
Can you make a vid of how to install a mosfet in a KWA EVE 9? I might get one soon and I want to know what the best one is and how to install, I'm new(ish) to airsoft so would it be worth it having a tech install it?
I did with a similiar KWA that uses the same gearbox. Should be in the playlists covering how to install a Jefftron Leviathan.
can you please show us the GATE G5 Brushless Motor please
i heard that is the best brushless motor in the market thats why is sold out very quickly
I did the NON rebranded version on another video previous to this one. Check it out! Gate'a G5 is literally a Solink V5 Brushless motor.
@@wyshtechairsoft thank you very much you are the best ❤
...I don't know.
I experienced a few misfunction of BLDC motor with ETU.
Maybe I should stick with Brushed one for now...
What brushless motor and what ETU did you try? Its extremely rare. Both brushed and brushless nearly function exactly the same.
We all know by now that brushless is superior so why not compare T238 with other brushless ones like warhead, solink and such and to see how the motor communicates with other mosfets and not just the t238 etu/mosfet
I’ve got a t238 motor in one of my guns with a Zion Nebula ETU it works fine. The start up beep sounds a lil funkier, also lowered the speed knob because it was spicier than I needed. Haven’t tried with a Perun ETU yet but I bet it’s fine
Not a bad idea. Thanks!
@@gokartmozart9430 was planning to buy this motor to use with the nebula etu, how is it so far is it plug and play with it?
@@mineralwater25 definitely was plug and play (besides adjusting motor height) I’ve used it in several matches, so far so good 👍 I haven’t tried the new nebula that has more settings for braking and pre-cocking etc. but just the older one with just fire mode settings. Btw if your ETU isn’t already installed make sure to put the selector plate on 1st! If not you can break the lil switch that detects fire mode. (Ask me how I know lol)
Can't wait to see the minigun build, we do have gelblaster conversations here but they are like $1500aud so stupid expensive but really cool, Brent Alderton who owns azraels armoury had had for a few years now and the run it off and 4500psi air tank 😅 goes pretty good 😅 they also imported a dd4 and put a leviathan twin apache's brushless motor the full bit and that thing's insane but they want 3.5k for it but it is a 1 of 1 and i highly doubt that you would even see a stock one in the country
Minigun video is almost done being recorded then its off to the editor!
@wyshtechairsoft 😁 can't wait
I just got the 37k QRBLS motor and it's going into my slr b15 gel blaster with a cyma platinum gearbox ,Bizarrely im getting 24rps with a shs hitorque and standard gearing so im keen to see how much that jumps after swapping to the 37k brushless, i don't know if my chrono is playing up or if it's got something to do with the 3s 11.1v 720mah 100c 200c burst drone lipo but i can't complain 😊
It should be at or get alittle more than 24rps with a 37k rpm brushless motor. Major difference is that your battery will last ALOT longer.
@wyshtechairsoft 29rps now with the cyma platinum gearbox stock internals besides the m130 aztech brown viton oring t238 v14.2 etu and cause i put a ssc maxim defense scw pdx stock on my multicam dytac slr b15 running a gaoneng 11.1v 3s 720mah 100c 200c high discharge drone battery ,had to take the outer head wrap off, no fuse and use a xt30 plug but it fit's nice and neat in the tiny buffer tube
Could you use the mosfet to change the RPS of the budget brushless motor anyways?
Nah. generally mosfets use pwm to lower rps. Brushless motors have their own controller and need a constant voltage. Using rof control is a good way to ruin your fancy new motor.
The rpm adjustment on the other t238/infinity motors is mostly a gimmick imo. You lose alot of trigger response the more you turn it down.
If you did want to lower your RPS the dial on the T238 works well and can be fine tuned. Lowing RPS with a mosfet is more for brushed motors. The brushless motors built in ESC might get confused and do low voltage protection if the ETU wasn’t giving all the juice
Great information guys! Thanks for sharing!
I bought the solink v5 from China and is 750+RMB and the which is more or less the same price as the rest. Funny that the price is so different😅
Right?