How to floor screed with sand and cement - Beginners guide- plastering Guru

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ก.ย. 2024

ความคิดเห็น • 209

  • @adamlucas7059
    @adamlucas7059 3 หลายเดือนก่อน

    How long does this take to fully dry

  • @bryang949
    @bryang949 4 หลายเดือนก่อน +3

    Great video - thank you!! I have two questions: what would be the minimum thickness of screed that one could apply to a job? And second, how long did the job take - how do you stop the mix from drying out before you have finished screeding? Thanks a lot!!

    • @Rayblondie
      @Rayblondie 23 วันที่ผ่านมา +1

      I did a couple of inches yesterday and it dried well. Now I need to put down a damp course and top it up to the level I need. If it is DIY I would just manually make a little at a time, let it dry and make some more.

  • @rogerpiper8808
    @rogerpiper8808 ปีที่แล้ว

    What is the mix? 3sharp sand 1 cement 1fibre mesh …. How much water?

  • @edthompson9337
    @edthompson9337 3 ปีที่แล้ว +9

    Have got some screeding to do, have seen it layed on site but never done any myself, having looked at other similar videos this was by far the best in explaining the different steps involved. Thanks to the Plastering Guru for taking the time and trouble to help others.

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Thank is very nice of you to say Ed Thompson, thank you very much👍

    • @Rayblondie
      @Rayblondie 23 วันที่ผ่านมา +1

      Same here. A very good visual as to how it's done. I've only got to do the loo but having never done it before this was very helpful. Still not to sure how I get to the exact level to the door entrance and leave a little for carpet tiles etc. but I will be able to figure that out.

  • @unknownname7472
    @unknownname7472 ปีที่แล้ว +4

    Here in Serbia we do screed with a team of four people and everyone has their specific job:
    - Machine worker - ( Screed pump ) Feeds the machine with Sand, Cement and water
    - Planer - When screed exits the hose he distributes it evenly close to the level that is needed ( with his foots ) and makes a level points
    - Bar/Rule guy - Does exactly that what you do in the video just much, much faster
    - Polisher - We have machines with a disc (plate) that rotates, it compresses and polishes the slab.
    we are doing around 200-280 square meters a day.
    Tomorrow im going to learn how to do the Bar/Rule part so im watching videos to prepare. Thanks for the video

    • @thehillsidegardener3961
      @thehillsidegardener3961 20 วันที่ผ่านมา

      In Serbia we also often use a narrow-gauge rebar mesh (šulc), or polyester fibre, but it doesn't seem to be compulsory, I am not sure when it is or isn't used but most videos I watch don't seem to bother. Also some people leave expansion gaps but none of those here either.

  • @simonlacey4482
    @simonlacey4482 3 ปีที่แล้ว +4

    Hi, really enjoyed your video, very good informative. What ratio of sharp sand and cement do you advise please, just subscribed thanks

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Hi simon lacey, thank you and very kind of you to say. The ratio is 3 shape and 1 cement 👍

  • @jerrynonofbss2588
    @jerrynonofbss2588 ปีที่แล้ว +1

    Here in the US the mix is more watery. Is that an aluminum tool that you use to screed? I don't know why but, as a DIYer, the cement sticks to the wood 2x4 that I use to screed.

  • @cubanmark
    @cubanmark 3 ปีที่แล้ว +3

    Do you use normal cement and to what ratio to sharp sand. I Thu k it will also be helpful to show how wet the mix should be. And any other chemicals do you add? Thanks

    • @plasteringguru572
      @plasteringguru572  3 ปีที่แล้ว +2

      Hi Nematullah Zamani, thanks for your comments. The ratio for screed is usually 3 sharp sand to 1 cement. There are a few additives that can be added but it all depends on the job specification. If speed is require you can use rapid cement, if you want to slow it down then add retarder, SBR could add an element of water repellent and fibres add extra strength. 👍

    • @PMCT14-T16
      @PMCT14-T16 หลายเดือนก่อน

      ​@@plasteringguru572 I think, your calculation is wrong. Bcoz 1/3 ratio means 1 m3 screed (2000 kg) has 600 kg cement. It is overdose. If you use 250 kg cement for 1 m3 screed, the ratio is around 1/7.

  • @lalbiakmawiapachuau4410
    @lalbiakmawiapachuau4410 ปีที่แล้ว +1

    Did you mix the cement and sand with water or dried?

  • @johnchampion7819
    @johnchampion7819 3 ปีที่แล้ว +3

    Great video. I hope you're on double the money that the lads in the white tee shirts are on, because you do at least twice as much work!

    • @Tone-Oz
      @Tone-Oz 3 ปีที่แล้ว +1

      Yep the labourers prepare the material and then need to wait so that there's space to put it. Can't do it before the last bit gets finished! I did notice same in the sped up vid also!

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Ha ha Good workers are worth their weight in gold👍

  • @BobbyFigliola
    @BobbyFigliola 3 ปีที่แล้ว +2

    Granny gonna be very displeased with you using her divan cushion ...

  • @ilienogai7309
    @ilienogai7309 3 ปีที่แล้ว +1

    Unbelievable this is 2020 England, no pump to push the ready mix, no Powerflot, no PPE,
    I really hope you are doing this occasionally, not for living....

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +1

      Thanks for your comment IIie Nogai, you are right I’m not doing this day in day out👍

  • @dorinacherneva2512
    @dorinacherneva2512 4 ปีที่แล้ว +9

    Thank you so much for these videos - I have an assignment on construction and there is nothing on google that explains the floor screening process this accurately. I understand it perfectly now and have managed to answer questions related to this topic easily!! THANK YOU FOR HELPING ME

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว +3

      Your are very welcome Dorina Cherneva. Thank you for such a nice comment, I’m glad I could help you. I wish you all the best on your assignment 👍

    • @okpakoderrickjr1236
      @okpakoderrickjr1236 8 หลายเดือนก่อน +1

      Thanks I appreciate this opportunity

  • @alaminhossian9105
    @alaminhossian9105 3 วันที่ผ่านมา

    how to screed for epoxy

  • @tac2180
    @tac2180 3 ปีที่แล้ว +1

    I'm planning on laying sand/cement screed in my garage . The floor is currently made up of 16 oak railway sleepers which aren't very level hence the screeding. I'm planning laying damproof membrane over the sleepers then screeding then this will give me a level floor . Do you think this is a good idea

  • @leng4818
    @leng4818 4 ปีที่แล้ว +1

    Why don’t you have knee pads you crazy man you need all your levels in before you start then one massive pullback to door nice beginner guide mate keep it up

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว +3

      Thank you ever so much for your comments leng, I have tried knee pads but I personally prefer a nice big old sofa cushion (very comfortable indeed) some people may prefer knee pads though. One massive pullback would have worked nicely if I had a big enough rule.....I was using a 3 metre one so found this way more efficient. 👍

  • @Alfapash
    @Alfapash 2 ปีที่แล้ว +1

    Great video. glad you're protecting your knees, so many don't and they'll regret it when they get older.

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Thank you L ROWE, very kind of you to say and you are absolutely right 👍

  • @Jlt678
    @Jlt678 3 หลายเดือนก่อน

    I hope this was ur own house 🤣

  • @Jlt678
    @Jlt678 3 หลายเดือนก่อน

    Level by eye not by laser 😂

  • @mikew151Manhattan
    @mikew151Manhattan 2 ปีที่แล้ว +1

    i think, the most difficult and annoying thing when screeding is digging into your previous area with the end of your screed bar/rule and therefore throwing your level off. it takes alot of practice to get to the guru's level. nice vid, thanks!

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Very kind of you to say Mike Wilkinson and you are absolutely right, it can be tricky at first but with a bit of practice it’s very satisfying indeed,thank you for your comment 👍

  • @swati2831
    @swati2831 4 ปีที่แล้ว +1

    Which sand need to use. Plaster yellow sand or white wash sand for floor screeds? I want to install tiles on it after that. Thanks

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว +1

      Hi SB B,thanks for your question... I use sharp sand for floor screeding 👍

  • @raghuarmani8341
    @raghuarmani8341 2 หลายเดือนก่อน

    Thanks. Nice video. Can you mix small stones (aggregate 1/2- 3/4 inch) in the screed? Do you mix any glue/ polymer / sbr latex. Do you apply any glue polymer on surface? I have to screed my roof terrace.

  • @ОмурбекКайимов
    @ОмурбекКайимов 9 หลายเดือนก่อน

    Как можно с вами связаться

  • @AntonioPasuey
    @AntonioPasuey หลายเดือนก่อน

    Great vid. I have to do same. Much smaller area tho. WHAT WAS THE MIX RATIO? thx.

  • @AbduragiemSadan
    @AbduragiemSadan 10 หลายเดือนก่อน

    Look like epoxy floor

  • @jordanbew9148
    @jordanbew9148 5 หลายเดือนก่อน

    OK if you can use ready-mixed. I am mixing by hand had to do 50sq/m over 5 days split between 4 or 5 areas

  • @ToyanganaYakungano
    @ToyanganaYakungano ปีที่แล้ว +1

    That was great.Satisfactorily illustrated. Was just looking for this

    • @plasteringguru572
      @plasteringguru572  ปีที่แล้ว +1

      Thank you, much appreciated and I’m very glad I could help 💪

    • @Rayblondie
      @Rayblondie 23 วันที่ผ่านมา +1

      I looked at a lot of DIY stuff but this was the best. Like messing about with sand. A lot of other ones were far too complicated with gadgets far too expensive just for one DIY job.

  • @marcindock79
    @marcindock79 10 หลายเดือนก่อน

    Great video!
    Would it be ok to split the job 34m2 into smaller areas and to do them over few days, please? Only because I am doing it by myself.
    Thank you for the video!

  • @brandonbottomley944
    @brandonbottomley944 11 หลายเดือนก่อน

    I have just ordered sharp sand from interline but they have given me coarse silver sand.Will this be ok to finish the last 60mm on top of my concrete base?

  • @Clemo86
    @Clemo86 ปีที่แล้ว

    That is a sexy looking floor. Never done screening before, but hoping to jump on my mates firm. Thanks for sharing this.

  • @karooboermeyer1115
    @karooboermeyer1115 ปีที่แล้ว

    Do you guys add any plaster key or bonding liquid? How do you do thinner screeds like 20mm screed?

  • @raj080288
    @raj080288 9 หลายเดือนก่อน

    amazing job! how long would this take to dry as opposed to a liquid screed?

  • @dawkdog666
    @dawkdog666 ปีที่แล้ว

    i always stick my toungue out when im screeding not sure why really weird

  • @johnlowry4148
    @johnlowry4148 3 ปีที่แล้ว +1

    Professional making it look so easy. Many thanks for sharing

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      My absolute pleasure, thank you John Lowry👍

  • @Northernspain
    @Northernspain ปีที่แล้ว

    What is the mix ratio and as I see in your video you had the materials prepared and sources from other provider, what do we ask for when ordering

  • @pannolane
    @pannolane 3 ปีที่แล้ว +1

    Why is it so dry shouldnt be a lot more wetter .

    • @tipstoes917
      @tipstoes917 3 ปีที่แล้ว +1

      Hi video is very good but I would also like to know what is the ratio for the water to sand3 and cement1 has been used as it looks quite dry but still a smooth floor. Pls reply, thanks

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      This was mixed on site in the lorry so couldn’t tell you how much water was in the mix but I could of had it slightly wetter although it was still fine…it was a hot day which helps dry it out quicker too. Thanks for your question 👍

  • @davoc5140
    @davoc5140 2 ปีที่แล้ว

    You made it look so easy ... if a pro like you was to do a 10 m x 3.5m place ... how much time would it take you ? (I can then multiply that by 100 and get an estimate for myself...)

  • @erichermann7553
    @erichermann7553 ปีที่แล้ว

    I used to do that same thing 40 some years ago don’t work to hard ⭐️⭐️⭐️

  • @ФаррухИсроилов-т7н
    @ФаррухИсроилов-т7н ปีที่แล้ว

    hi take me to work on the floor screed I have work experience

  • @Motivation_One88
    @Motivation_One88 2 ปีที่แล้ว

    When I see your avatar, I thought you are a damn doctor :)

  • @lesbrown5314
    @lesbrown5314 4 หลายเดือนก่อน

    What rule are you using high and width?

  • @yabeebay
    @yabeebay 7 หลายเดือนก่อน

    Great video, but who are the guys in the back with baseball caps and t-shirts who seem to have literally nothing but watch?

    • @dannywholuv
      @dannywholuv 6 หลายเดือนก่อน

      Thats what you call an apprentice

  • @Skullmonkey456
    @Skullmonkey456 4 ปีที่แล้ว +1

    Great video, thanks for uploading

  • @arniet1
    @arniet1 2 ปีที่แล้ว

    Interesting. I've never thought about screeds before. If I did a screed over a compacted dolomite driveway and then covered the screed with 20mm gravel, would it likely hold up for several years (uk weather) and take the stress of one car and a motorcycle?

  • @andrewodowd9529
    @andrewodowd9529 ปีที่แล้ว

    Great video.How do you start with making sure it's properly level?

  • @stevensmith8998
    @stevensmith8998 3 ปีที่แล้ว

    Hi,about to convert my double garage and the concrete floor slopes towards the garage door from half way ,with a drop of around 70mm. Want to lay a floating floor. Would you say I would need to do this? Or would it be ok to just use sand to fill? Won’t be taking any great weight just want it to be stable .cheers

  • @BobaBabe5607
    @BobaBabe5607 ปีที่แล้ว

    Where is the concrete ? That’s just dirt?

  • @colmpower5197
    @colmpower5197 2 ปีที่แล้ว

    Can you use epoxy resin floor paint on screed ?

  • @kevinwillis6707
    @kevinwillis6707 4 หลายเดือนก่อน

    thanks for the guide👍

  • @amrafonso
    @amrafonso 3 หลายเดือนก่อน

    What a great way to gain a back pain

  • @teach1913
    @teach1913 2 ปีที่แล้ว

    How much was that wagon of screed mate?

  • @grantbond6504
    @grantbond6504 2 ปีที่แล้ว

    Your guys in the background need a secondary job lol ... too much standing about!

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Ha ha we were lucky to have them truth be told 👍

  • @evillemonkey
    @evillemonkey 11 หลายเดือนก่อน

    Was that a wood float or rubber float?

  • @Inquisitive37
    @Inquisitive37 3 ปีที่แล้ว

    Hello. I noticed the house we purchased the extention attached to the house - the flooring does not have insulation. There is a membrane and 4" concrete on the floor. However is there an option i could insalate the floor before we decide to put either laminate or carpet down? Thanks in advance

  • @skydiver91
    @skydiver91 3 ปีที่แล้ว

    I'd love to get into flooring as a skill and eventually as a profession but I have NO idea where to begin... would you be willing to help a fellow out? Become a mentor of sorts?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Absolutely, I would suggest having a look in your local area for screeders….contact them and see if they need a labourer to help or if not volunteer your time for free for a day or two to help out just to see if it’s something that you might like to Perdue further 💪

  • @1real11
    @1real11 ปีที่แล้ว

    Excellent guide & really I like the big cushion idea. Can you please advise on a hand mix and how wet/dry it should be.

    • @plasteringguru572
      @plasteringguru572  ปีที่แล้ว +1

      Thank you, your comment is much appreciated. That’s a good idea for a future video and in the meantime if you put some mix in your hand, you should be able to to squeeze it together, open your hand back up and it hold its shape nicely without crumbing (too dry) or slipping out of your hand (too wet). I hope this helps 💪

  • @ifti0016
    @ifti0016 3 ปีที่แล้ว

    What us the standard thickness of screed
    ..
    As by builder put 100mm. Is it ok or not?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      It does all depend on the spec and what the screed is being laid on 👍

  • @p0st00r
    @p0st00r 4 ปีที่แล้ว

    Is it Ur main job ? I skip the floater and use only the trowel . I fill all the small holes with the ruler . How much u do in 1 Day ?? And why dont u use knee cups instead ?

    • @plasteringguru572
      @plasteringguru572  3 ปีที่แล้ว +1

      Thanks for your comment Nico Van Dooren, sounds like your maximising efficiency with skill. I’ve used knee pads however I personally find a sofa cushion much more comfortable. 👍

  • @TimKollat
    @TimKollat 3 ปีที่แล้ว

    Here in the US this isnt really done. We use concrete to do this type of flooring. But I think Im going to start selling this option. Much easier to work with.
    I would think this would crack up really bad though..is that not the case?

    • @Tone-Oz
      @Tone-Oz 3 ปีที่แล้ว

      There is enough cement in the mix to keep it hard enough for tiles to be glued on top later. Before laying screed good to put bondcrete or Semstick down so that screed sticks to slab.

  • @SurajDoley-if7rm
    @SurajDoley-if7rm 6 หลายเดือนก่อน

    New subscribe

  • @plummetplum
    @plummetplum 3 ปีที่แล้ว

    Very nice job indeed and thanks for sharing, I want to re tile a path with small mosaics but the existing tiles are shot so I will need to take up path. Would a screed be ok for this purpose, I need it flat, I think concrete would shrink too much, it's on a slight slope too? Does the screed shrink much? How thick can a screed be?

  • @jordanmaunder6231
    @jordanmaunder6231 3 ปีที่แล้ว

    Plus the screed is way way way to dry mate get it with more moisture u cant get a good finish then

  • @lenth7775
    @lenth7775 3 ปีที่แล้ว

    3 to 1 mix..
    Any water in that?
    How long does it take you cure?

  • @superbravotwo
    @superbravotwo 2 ปีที่แล้ว

    Is this cement ordinary concrete mix of does it need anything added??

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +1

      Thank you for the question….it’s just Sharp sand, cement and water

  • @guoruiren9326
    @guoruiren9326 2 ปีที่แล้ว

    nice job, thank you, but why there are no windows and doors to avoid the wind

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Thank you guorui ren and we’ll noticed, in a perfect world that would be the case however due to the drying times of screed more often than not they get the screeding done as soon as there is a roof on and not much else 👍

  • @stevesculptor1
    @stevesculptor1 2 ปีที่แล้ว

    Great video. What's the ratio of sand and cement ? 4:1 ?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Very kind of you to say Stevesculptor, it’s a 3 and 1 mix…..although some people use 4 and 1, usually when it’s being covered by large tiles etc. a stronger mix is better if you are having carpet or a thin floor covering 👍

  • @richardhainsworth5415
    @richardhainsworth5415 2 ปีที่แล้ว

    How long for the screen to dry so you can walk on and carpet or place a wood floor on it.

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Hi Richard Hainsworth, depends on temperature but you can usually walk on it after a couple of days and textbook is 1mm per day drying time 👍

  • @AbduragiemSadan
    @AbduragiemSadan 10 หลายเดือนก่อน

    Whit a shining finish

  • @BiodanzaMalta
    @BiodanzaMalta 2 ปีที่แล้ว

    If you don't have ready mixed screed arriving by vehicle...do you know what the measure of cement/sand/water would be to get that quality of mix you are using?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +4

      Thanks for the question, it’s a 3 and 1 mix but the amount of water varies depending on how dry or wet the sand is but it wants to be wet enough so you squeeze some in your hand then open your hand back up it holds its shape, if it starts to crumble….it’s too dry. Hopefully that helps 👍

    • @jakeantony8447
      @jakeantony8447 2 ปีที่แล้ว

      We stopped knocking it up in a mixer - not long enough and it's not thoroughly mixed, too long and you end up with cement marbles. Ready mix is the way forward but you have to be fairly quick with it

  • @tazhowden6422
    @tazhowden6422 2 ปีที่แล้ว

    Can you tell us the ration of sand to cement and water please

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Thanks for the question Taz Howden, it was actually mixed in the lorry using a 3 (sharp sand) and 1 (cement) mix, not sure exactly how much water but it wasn’t a particularly wet mix 💪

  • @juliegordon736
    @juliegordon736 2 ปีที่แล้ว

    Good video, well done! Whish you could our floors….

  • @colin90day
    @colin90day 3 ปีที่แล้ว

    Will that just set on its own or would you need to add water also what ratio would I need if I was mixing by hand

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      It’s a 3 and 1 mix with water and it cures on its own after it’s been laid 👍

  • @oliemerson3924
    @oliemerson3924 3 ปีที่แล้ว

    Do I need to put any primer down on top of new concrete oversite first?

  • @saif1980saif
    @saif1980saif 3 ปีที่แล้ว

    This seems better than levelling compound

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Levelling compound is usually used if you have a very thin layer to cover 👍

  • @richmoore9640
    @richmoore9640 4 ปีที่แล้ว +1

    Excellent, well thought out vid!

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว

      Very kind indeed 👍

    • @richmoore9640
      @richmoore9640 4 ปีที่แล้ว

      @@plasteringguru572 any chance you can do a dry screed floor for me in Cirencester? Local flooring firm reckons its a dying skill that I won't find anyone to do!?!?

  • @yuchuga8341
    @yuchuga8341 3 ปีที่แล้ว

    Do I have to mix the screed with water before laying ?

  • @Tone-Oz
    @Tone-Oz 3 ปีที่แล้ว

    Very informative. Thanks for sharing. I appreciate 👍 Great editing/vid also! Subbed

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +1

      Thank you Anthony T, very kind of you to say 👍

  • @Meruyungdepok78
    @Meruyungdepok78 ปีที่แล้ว

    Halo salam plester dari Indonesia

    • @plasteringguru572
      @plasteringguru572  ปีที่แล้ว

      Greetings from England. Thank you for your comment 💪

  • @earbjr4715
    @earbjr4715 2 ปีที่แล้ว

    Nice!

  • @kopkings5
    @kopkings5 3 ปีที่แล้ว

    Does anyone know what the sand/cement ration is for this? Any help will be appreciated

    • @richardday3862
      @richardday3862 2 ปีที่แล้ว +2

      1: 4 cement to sharp sand, with fibre added for strength if you can.

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +1

      The spec for this floor was 3 and 1 but some are 4 and 1, fibres absolutely add some strength too

  • @Captn_Cor
    @Captn_Cor 3 ปีที่แล้ว

    What is the benefit of doing this compared to having a concrete floor poured?

    • @agt155
      @agt155 3 ปีที่แล้ว +2

      This screed usually goes on top of a concrete floor. Concrete is strong but will leave an uneven finish. Screed is weaker but leaves a very flat finish.

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Absolutely

  • @pakCampingOnWheels
    @pakCampingOnWheels 2 ปีที่แล้ว

    Do you have to water it as well for few days ?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      All depends on the temperature but it certainly wouldn’t hurt if it was somewhere very hot 👍

  • @mozaman9005
    @mozaman9005 3 ปีที่แล้ว

    Hi hope you are well, if you only had a small area around 1m x 1.5m and didnt have access to a mechanical mixer, how would you go about mixing the screed please thanks?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +1

      Hi Mo Zaman, I’m very well thank you. In that case and for such a small area, mixing it on a board with a shovel would be an option to consider👍

    • @mozaman9005
      @mozaman9005 2 ปีที่แล้ว

      @@plasteringguru572 wow thanks for the reply dude!

  • @KennyObiWanKenobi
    @KennyObiWanKenobi 2 ปีที่แล้ว

    Looks very satisfying, cheers mate 😁

  • @antonyporter5045
    @antonyporter5045 3 ปีที่แล้ว

    is there fibreglass in that screed ?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว +1

      They were not on the spec of this one no, but fibres are becoming more and more common 👍

  • @jufriazziq
    @jufriazziq 2 ปีที่แล้ว

    did you mix it with water ?

  • @philipskrusso1153
    @philipskrusso1153 2 ปีที่แล้ว

    Now this was worth my time watching 👍

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Thanks Philipsk Russo, glad you liked it👍

  • @rajvindersinghghotra4369
    @rajvindersinghghotra4369 3 ปีที่แล้ว

    Hard work i do the same work

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      You are not wrong there, it is very satisfying though👍

  • @ronio9247
    @ronio9247 4 ปีที่แล้ว

    My problem is once ive got my guides on either side, I always end up shaving too much from one of the sides.... how do i help this not happen

    • @plasteringguru572
      @plasteringguru572  3 ปีที่แล้ว +3

      Hi Roni O, the simple answer is experience. The more you practice the better control you will have. I would suggest a lighter grip to begin with getting firmer when you are closer to your guides. I hope this helps 👍

    • @ronio9247
      @ronio9247 3 ปีที่แล้ว

      Ur a legend thnks

  • @geoffstein3896
    @geoffstein3896 ปีที่แล้ว

    This has helped me 👍👍

  • @joebruniges6478
    @joebruniges6478 4 ปีที่แล้ว

    Love the channel greats vids an advice keep up good work👍

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว

      Thank you Joe Bruniges, very kind indeed. I appreciate the comment 👍👍👍

  • @valcic1993
    @valcic1993 2 ปีที่แล้ว

    What sand you use?

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Thank you for the question….Sharp sand 💪

  • @markallen8097
    @markallen8097 4 ปีที่แล้ว

    Have you got a video for a bonded screed?

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว +1

      Thanks for your question Mark Allen.....I haven’t at the present time but I may in the future 👍

  • @alliedfroth
    @alliedfroth 3 ปีที่แล้ว

    What MIX IS IT???????

  • @projectdyad
    @projectdyad 2 ปีที่แล้ว

    looking goodie goodie

  • @burnardhayes8995
    @burnardhayes8995 2 ปีที่แล้ว

    Very good looks good

  • @coxson
    @coxson 3 ปีที่แล้ว

    good video

  • @paulsmith9159
    @paulsmith9159 3 ปีที่แล้ว

    Great video and a great job👍🏻

    • @plasteringguru572
      @plasteringguru572  2 ปีที่แล้ว

      Very kind of you to say, thank you paul smith

  • @johnswimcat
    @johnswimcat 4 ปีที่แล้ว

    Great job. We're rendering a swimming pool and have the floor to lay tomorrow. This is very helpful. I'll watch it again later today

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว

      Fantastic, I hope it went well 👍

    • @barkleycharles5465
      @barkleycharles5465 3 ปีที่แล้ว

      Hey, how did that go? Did you use screed rails? I am doing mine next weekend.

    • @johnswimcat
      @johnswimcat 3 ปีที่แล้ว

      @@barkleycharles5465 Hi, yes, we used a 4x2" slightly shorter than the width of the pool floor. We ran it on two rails each about 2' long and pulled those with us as we went, filling the gaps they left as soon as we'd moved them. I can't remember whether we tamped the 4x2" up and down or wiggled it from side to side. I think it was side to side. Screeds are normally 2" thick I think but we only laid about 1 1/4" as it's a pool floor and wouldn't take the pounding of a house floor. Having said that we've since walked on it a lot rendering the walls and it's held up ok. We couldn't lay the last few feet, nowhere to put our feet, so that was done a couple of days later. As ever you need to get the mix about right, not too dry which will be harder to lay, not too wet which will produce a dusty floor. I'm not an expert, just an amateur, but our floor turned out reasonably ok. Watch a couple of videos by people who know what they're doing though! If I can answer any questions I will

  • @timnoble7708
    @timnoble7708 4 ปีที่แล้ว

    How do u control the level, cant imagine ?

    • @plasteringguru572
      @plasteringguru572  4 ปีที่แล้ว +1

      Hi Tim noble, once you have used the rules to level the edges (forwards and backwards motion, tilting the rule ever so slightly) you fill the middle with screed and then you have the level guides ether side. 👍

    • @michaelblanshard1622
      @michaelblanshard1622 3 ปีที่แล้ว

      We use laser levels to keep checking all the way through. Good job done there by the looks of it, It’s a hard day graft screeding glad I only do it 4-5 times a year.