Good disassembly video! For those asking- his car has a standard double din size opening- any double din radio will fit. That said, a lot of the Chinese no name ones aren’t quite the right dimensions- as evidenced by the need to trim the radio opening in this video. Most name brand (JVC/Kenwood/Pioneer/etc) are built to better tolerances and should fit just fine. The screen size doesn’t matter as long as it’s a double din chassis. You can even install the new style floating radios with 10,12 or even 15” screens as they have either a din or double din chassis that mounts in the car and the screen floats in front of that chassis.
Great video. Smart kid. I am a senior and I need to replace my 2008 Nissan Versa radio and was concerned I would have to remove the whole dash. You put my mind at ease. If I get a garage to do the replacement, it won't cost as much as I thought. I could even do it myself. Good job!
If you unplugged the airbag mode you can reset the error in the computer by turning the ignition to its on position, wait until the airbag light turns off and turn the key to acc within 1 second. Wait 3 seconds and repeat this 3 times. then turn it to the on position again, and the airbag light will flash really slowly, thats good. turn it off for a couple seconds and then turn on again, the airbag light no longer blinks after this, you are good to go.
I had the same problem with the fit in my versa..I put in a single din and a piece to sit under it, but the below piece didn't quite fit, so I just left a hole lol
Thanks, very detailed and helpfull video, but i was wondering how to know how to connect what radio cable to wich car harness cable, might there be a graph for it or something similar?
Was told the other were having trouble during playback didn’t know it was the video itself or firmware, so thought to upload a second one just in case and as a test and hopefully it will play better.
Good disassembly video! For those asking- his car has a standard double din size opening- any double din radio will fit. That said, a lot of the Chinese no name ones aren’t quite the right dimensions- as evidenced by the need to trim the radio opening in this video. Most name brand (JVC/Kenwood/Pioneer/etc) are built to better tolerances and should fit just fine. The screen size doesn’t matter as long as it’s a double din chassis. You can even install the new style floating radios with 10,12 or even 15” screens as they have either a din or double din chassis that mounts in the car and the screen floats in front of that chassis.
Great video. Smart kid. I am a senior and I need to replace my 2008 Nissan Versa radio and was concerned I would have to remove the whole dash. You put my mind at ease. If I get a garage to do the replacement, it won't cost as much as I thought. I could even do it myself. Good job!
Nothing like my 2012 Versa.
Hello, where did you buy the white adapter to which you connected the two plugs to put the link? thanks
If you unplugged the airbag mode you can reset the error in the computer by turning the ignition to its on position, wait until the airbag light turns off and turn the key to acc within 1 second. Wait 3 seconds and repeat this 3 times. then turn it to the on position again, and the airbag light will flash really slowly, thats good. turn it off for a couple seconds and then turn on again, the airbag light no longer blinks after this, you are good to go.
I had the same problem with the fit in my versa..I put in a single din and a piece to sit under it, but the below piece didn't quite fit, so I just left a hole lol
Thanks, very detailed and helpfull video, but i was wondering how to know how to connect what radio cable to wich car harness cable, might there be a graph for it or something similar?
Where did you get the wire harness adapter? What brand was it, and can you send a link? Thankyou
Thank you, for the video! very helpful 😁
Glad it was helpful!
Great video! Could you send me for 2008 versa stereo link pls
have to watch out in some Versas I had to run my own Ground wire. blew one head unit up because there was not a ground though the one harness
How do you know if you have to do that?
so where did you get this cheap radio? any info on the price? model? website?
Like some one else said, what brand is the after market radio and where you buy it?
I have a 2009 nissan cube, and the appropriate wiring harness does not exist that I can find in store or online.
Where did you buy the radio?
My radio keeps running all the time even though I turned off the car!
I really need help any ideas?
Nissan Versa 2009
After installing I don't have sound
Same
You didn’t include the most important part, you left out the wire color guide
Nice video.. Very helpful
Im getting power to the wiring harnesses but the deck isn't turning on
Probably need to ground it to chasis
What inch screen is that ? I have a 7in would it fit ?
Excellent!!
How to conect the Steering whells
I know this is an old question- but it takes an additional harness/adapter AND the new radio has to be compatible.
Reupload?
Was told the other were having trouble during playback didn’t know it was the video itself or firmware, so thought to upload a second one just in case and as a test and hopefully it will play better.
That is why you go to wal mart