Drilling Your Walls To Fit a Damp Proof Course
ฝัง
- เผยแพร่เมื่อ 22 ส.ค. 2024
- In this video, damp Sam react to a video by Mark Hep at House Renovations UK. Watch the full video here - • Damp proofing a wall r...
ABOUT THE HOST
Simon Cooper AKA Damp Sam is a time served plasterer since 1983 and has a HNC in building management. He is the director of 3 Ltd companies and a PCA qualified Damp and structural waterproofing surveyor. He also owns a portfolio of properties that he renovated over the years.
Check my TH-cam Channel where you can find hundreds of videos all about Damp!
/ @dampsam
/ all_dry_damp
/ simon-cooper-csrt-cssw...
www.tiktok.com...
CONTACT METHOD
Dampsam@alldrydampproofing.com
/ alldrydp
Simon@thedampshow.co.uk
Simon@alldrydampproofing.com
My property is almost 100 years old, no damp, not drilling holes in the brickwork for damp coursing it does not need it
Not all houses do some are just fine
It's a load of bollocks that's why
Lucky there pal
Dont ever do this it dosent work and looks bad
@@dampsamit doesn't work
😂 a damp wally critiquing a damp wally. Its like the blind leading the blind!
Haha your so funny viperwank 🥴
New from J m l 🤣👍
Hi Sam , I’ve just bought a house which the bank survey put down a “ damp “ retention of £5k as the house was left alone for 2 years and nobody living inside it , I’ve been using a electric dehumidifier and heaters on , the “damp” which is actually condensation 95% has dried up , what would you recommend my next steps to be , dry zone membrane?
I can’t say without seeing it
I have old bitumen DPC and Im going to use Dryrods. Do i drill in the same mortar course or go in the one above?
No idea iv not seen the property
In the original video did you see the flower basket on the damp wall 🙄
I did a survey inside and out and it’s rare I miss anything that’s why our customers use us.
Well over 150? You need sacking
I’ll get mi coat 🧥
@@dampsamI will add 75mm per course that's bit shy if 2 course . Orob around 130-140mm
That aint 150 off ground
150mm it’s there abouts
@@dampsam eyes of a bricky here lol
@@dampsam looks like lime mortar to me they look like imperial size bricks. Probably be repointed in sand and cement no need for this damp injection system
133mm
What a waste of time and money.
Depends how much of both
Doesn’t depend on anything. Rising damp is a myth and you know it.
@@danielchurchley140 But a myth that makes some folks a lot of money. You might as well sell home owners a bag of magic beans to cure the 'rising' damp.
What do you do instead? Ive been told i have rising damp in my porch, its a mess and smells horrible. Damp company say they need to do this, as well as take the plaster off.
@@Linda-rn7pg Damp companies want to sell you expensive works. Do your own research about 'rising damp' and then you should be able to work out the real cause of the problem and solve it. Start with gutters and soil levels.
Amateur! Professional should seal bottom off wall to ground level with hydroisolation ! 1 injection , paint , stick polimer isolation , cubic wrap, and on end should be 20 cm gravel around the wall to help get out moisture from walls.
Course they should 🤦🏻