hi. please help me. i have a problem with peugeot 307 2.0 hdi 110 hp 2003. the screen shows antipollution fault and esp. the engine runs at 1100 rpm and sometimes the throttle runs but immediately returns to 1100 rpm. and no more response to the accelerator pedal. my car mechanic says it's not an egr valve and a fap filter. that the problem is with abs. because it cannot be connected by auto diagnostics with abs. please do you recognize what is causing this problem? thank you alex
Hi there my ABS light is not on, however my brake pedal sinks. I've changed the master cylinder nothing has changed. Do you think this could be a faulty abs?
Hi there, I had and still have this problem with one difference. The light was coming on and off randomly. Mechanic said the connectors are to be blamed so he just cut them and welded directly wires. Since the light is there non stop from start (before the light was coming up after passing 5 mph or not coming up at all). I am thinking( I am not sure) is it possible that he crossed wires when he welded them. I mean he connected for example left with right and right-left? After his job my OBD connector was down. Had to change the burned fuse. What will be happened if you connect wires as described above crossing them? Thank you!
hi there a good video but the , needing help with the front scenser on my peugeot they need changing do you have any videos on this as i can not find any on line thanks
You can check the resistance values with the meter as shown for front plugs same as rear so you need the same value of ohms resistance to determine pass or defective the abs sensors are very easy to change ... all depends whom has been fitted before ... torq screw head or 10mm bolt head behind wheel hub ... normally rusted in but freeing oil and pair of pliers and you can remove them ... if the sensors are reading okay ... then you have an abs ring defect and sadly that means new wheel bearing ... which might be why you have this fault ... notice any play on bearing or any noise
dravo provjerijo sam abs senzor na zadnji tocak kod peugeot 307 hdi 2003 pokazuje 640 na obadva da li kje to u redu gori lampica od abs molim omoc hvala
Huso odvezi auto na kvalitetnu dijagnostiku koja ce pokazati koji senzor je u kvaru. Po otpornosti bi ti zadnji trebali biti uredu ali pitanje je u kakvom su stanju mag. prstenovi.
Thank you SO MUCH !! This was really helpful.... You do an incredible job posting these video clips. Thanks !
Only git abs light on only no traction light is on ?
Thank you for your beautiful and useful clips
You are very welcome Mohamed! I am glad you enjoy the videos :)
Thank you very much
I'll check it tonight
Thanks, helpful
hi. please help me. i have a problem with peugeot 307 2.0 hdi 110 hp 2003.
the screen shows antipollution fault and esp. the engine runs at 1100 rpm and sometimes the throttle runs but immediately returns to 1100 rpm. and no more response to the accelerator pedal.
my car mechanic says it's not an egr valve and a fap filter. that the problem is with abs. because it cannot be connected by auto diagnostics with abs.
please do you recognize what is causing this problem?
thank you
alex
Thanks for uploading! Very useful
And thank you for good feedback, I appreciate it!
Cheers!
Hi there my ABS light is not on, however my brake pedal sinks. I've changed the master cylinder nothing has changed. Do you think this could be a faulty abs?
Hi,
Great video. I was wondering if you could tell me how did you find the exact broken sensor using pp2000.
Thanks a lot!
Have the same exact question...
Hi there, I had and still have this problem with one difference. The light was coming on and off randomly. Mechanic said the connectors are to be blamed so he just cut them and welded directly wires. Since the light is there non stop from start (before the light was coming up after passing 5 mph or not coming up at all). I am thinking( I am not sure) is it possible that he crossed wires when he welded them. I mean he connected for example left with right and right-left? After his job my OBD connector was down. Had to change the burned fuse. What will be happened if you connect wires as described above crossing them?
Thank you!
Thank you
Ja na trzech czujnikach nie miałem w ogóle rezystancji. Tak nagle przestały działać?
hello. how to turn off the ESP on a peugeot 307 2005. there is no button to turn it off, thank you
do all types of pug 307 have the same abs sensor value?
Apakah beda tipe 307 juga berbeda nilainya sensor abs?
Can you please make a Video (how to install reverse parking sensors)? It's very useful and important ... thanks for your videos
Hi Mohamad,
I will add this to the video list.
Cheers
Underneath the air box on a1.6
Hi thanks for this video pls on what resistance did you turn your multimeter 200k or 2000 pls help me out
20
ZDRAVO KOD MENE GORI ABS CIM POKRENEM MOTOR PEUGEOT 307 HDI 2003 KAKO SE MOZE PROVJERIT SENZOR I KOLIKO IH IMA HVALA
hi there a good video but the , needing help with the front scenser on my peugeot they need changing do you have any videos on this as i can not find any on line thanks
You can check the resistance values with the meter as shown for front plugs same as rear so you need the same value of ohms resistance to determine pass or defective
the abs sensors are very easy to change ... all depends whom has been fitted before ... torq screw head or 10mm bolt head behind wheel hub ... normally rusted in but freeing oil and pair of pliers and you can remove them ... if the sensors are reading okay ... then you have an abs ring defect and sadly that means new wheel bearing ... which might be why you have this fault ... notice any play on bearing or any noise
dravo provjerijo sam abs senzor na zadnji tocak kod peugeot 307 hdi 2003 pokazuje 640 na obadva da li kje to u redu gori lampica od abs molim omoc hvala
Huso odvezi auto na kvalitetnu dijagnostiku koja ce pokazati koji senzor je u kvaru. Po otpornosti bi ti zadnji trebali biti uredu ali pitanje je u kakvom su stanju mag. prstenovi.
Thanks a lot
You're welcome :)
Mine was the sensor ring on the rear near side
Do you need to reset abs light afterwards?
No - just drive and as soon as you reach 10 kilometres per hour - the ABS light will/should go out automatically.
Senzorul pt kilometraj unde se afla
hello.how can i disable the headlight sprayer.
Yes. By removing sprayer motor fuse .
🙂
:)