@ezboyrc553 I thought I heard you say you needed to make a splitter. I thought a while back I sent you some connectors and a no solder connector for direct power things like the winch from Holmes Hobbies.
I just installed my first Fusion pro 2300 kv. Much easier than I thought, very impressive performance too. I also picked up an RC4WD 8274 winch, tons of pulling power. If I could afford it I would have a Fusion Pro in all my rigs
I will see if I can work on that soon. I'm trying to do a comparison on some other 2 speed vehicles as well. I need to get one of them GPS things that you put in your r c car and it tells you the speed on your phone
Yes it can run 3s battery. The only way it would burn up is if the main power wire, hot and negative.was backwards, when you plugged it in, and that's hard to do.. If you just bought it, they have a pretty good Warranty program You just have to send it to them, and they will look at it and see if they want to replace it.
I'm running a different radio because I switched to the two speed instead of dig, so i'm not sure, but i'm thinking that it goes through the receiver and would be okay.
No, you don't have to take the transmission out for just a motor swap. You actually only have to remove the fake engine off the top and 2 more screws. I think. The motor comes out very easy.
Hello, your videos are very good. I wanted to ask you if you could give me the link to the wheel extension, which will be 12mm, right? thank you so much!!
Sorry. I don't have a link for these wheel extensions i've had them for many years. I always just look them up on amazon. There are plenty to choose from. They are 12mm hex's & About 15mm wide
I honestly don't know why Axial just doesn't make the 2 speed transmission a standard feature same as what Traxxas does. Why make people have to tear apart the rig in order to get this option going?
Since you already have a TRX4, you can use that radio to control the jeep but you'll just need to pick up another Traxxas receiver. At least that way you'll have all the channels. I did that for my early Bronco last year. @@ezboyrc553
You are the man! I cannot thank you enough!! I was telling the guys at R&H Hobbies what you built for me and they can't wait to see it ass well.
I can't wait for you to get it ass well. 😆 🤣
@ezboyrc553 I thought I heard you say you needed to make a splitter. I thought a while back I sent you some connectors and a no solder connector for direct power things like the winch from Holmes Hobbies.
I just installed my first Fusion pro 2300 kv. Much easier than I thought, very impressive performance too. I also picked up an RC4WD 8274 winch, tons of pulling power. If I could afford it I would have a Fusion Pro in all my rigs
I would too if I could afford them. I only have one 2300kv Pro
But I have 3 of the 1800kv FUSION SE Because they are almost as good for half price.
@@ezboyrc553 if it makes you feel any better , the 2300 KV costs $262 in Canada . Keep up the great work 👍
Hi, I’m installing the same motor. What mount numbers did you use to get it the pinion gear and spur gear to mesh properly ? Tia
You’re some good at wrenching . Good job on all your projects 👍🏼
Awesome love it, Great job👍🫡✨️✨️ Ready for the run video.
Thank you so much, this was super helpful. I'm going to get second gear going on mine too. Can you show us the difference in speed between the gears?
I will see if I can work on that soon. I'm trying to do a comparison on some other 2 speed vehicles as well. I need to get one of them GPS things that you put in your r c car and it tells you the speed on your phone
Can I plug an 11.1v lithium ion battery onto it as last one blew up.
Maybe wires crossed?
Yes it can run 3s battery. The only way it would burn up is if the main power wire, hot and negative.was backwards, when you plugged it in, and that's hard to do.. If you just bought it, they have a pretty good Warranty program You just have to send it to them, and they will look at it and see if they want to replace it.
@@ezboyrc553 did you keep the same pinion from old motor when changing to fusion?
Hi,
Do you still get the battery level with the hobby Wing system on your Spectrum radio?
Thank you
I'm running a different radio because I switched to the two speed instead of dig, so i'm not sure, but i'm thinking that it goes through the receiver and would be okay.
And do ya need to take the transmission out to do just the motor swap? I plan on keeping dig. Thanks man!
No, you don't have to take the transmission out for just a motor swap. You actually only have to remove the fake engine off the top and 2 more screws. I think. The motor comes out very easy.
@@ezboyrc553 thanks man!
Hello, your videos are very good. I wanted to ask you if you could give me the link to the wheel extension, which will be 12mm, right? thank you so much!!
Sorry. I don't have a link for these wheel extensions i've had them for many years. I always just look them up on amazon. There are plenty to choose from. They are 12mm hex's & About 15mm wide
I honestly don't know why Axial just doesn't make the 2 speed transmission a standard feature same as what Traxxas does. Why make people have to tear apart the rig in order to get this option going?
Absolutely agree. And even after doing the work , putting it in & not having a controller that will work 4 channels is just nonsense. Lol
Since you already have a TRX4, you can use that radio to control the jeep but you'll just need to pick up another Traxxas receiver. At least that way you'll have all the channels. I did that for my early Bronco last year. @@ezboyrc553
Do you build those atvs often? That's awesome!!!!!
Thanks. I have built a couple of them, and i'm going to build another one soon.
@@ezboyrc553 how much you charge? I want one!!
I have an scx10.2 could i use the reciever out of it? I bought the hobbywing and a new servo but not sure how to install it.
If it's a spectrum receiver it should work
Its the one the Cj came with. 2 n 1.
@@ezboyrc553
Hi,
Very grateful for you. What figure size in it please?
Marty mcfly is 7 inches. Most of my other characters are 8 inches, which is a little big for this truck.
whered ya get that sweet four wheeler?
I made the four wheeler it is a scx24 costume.
👍👍😎😎
You need to be careful with the drill. Should just snug it down. Then hand tighten by hand. Or could break plastic parts
This drill don't have that much power.