TSB for the off throttle rattle is 18-2354. Had it done on my 18 5.0 but it doesn't fix it, just makes it a little quieter and tries to make it happen less below 1,500 rpm. Not a real fix. Most forums suspect it's the VCT solenoid on the Trans. High pitch whistle Ford claims is the multi-clutch system for the 10-speed and is 'normal' -- I agree with your prior vid that it sounds more throttle related (easy to replicate with repeated throttle blips) and I feel it's definitely not normal. Looks like we are fighting a couple of the same battles lol. Good luck!!
They look good! On a side note, the metal clips should be flipped around. The big hole in front. All that is holding them in is the little bend at the bottom of the clip. I hope that makes sense for you.
Just bought the same exact liners for my truck, what you really need to do is buy those black insert decals for your tailgate. It would make it look 100 times better :)
Nic nice man I really love the way it changed the look of the truck. Yea I’ve seen some trucks running those and they do look sharp 👌🏽 How are you liking the husky brand? Ever consider getting the floor mats too?
After watching a few install videos on the Husky liners, I opted for the factory ones from Ford. It's a little easier install, and the Ford liners don't cover the rear shock bolt up. This might not be an issue for some people, but I'd rather not be fighting a liner during what should be an easy rear shock replacement. I don't think the Husky's are necessarily bad, but anyone who's installed the Ford liners would probably agree they're worth the extra money.
Sagittarius 88 good to know. I’ve never seen the factory ones on the truck before. Does it get rid of the body/frame gap too? After lifting it was really bad
@@AndrewNobleOfficial I haven't lifted my truck yet, but I'm only planning on doing a leveling kit, most likely going for the Fox 2.0 coilover/shock package. This is one of the reasons I went for the factory liners, because I know those rear shocks are already slated to come off. Off topic, the amount of goodies available for the F150 are seemingly endless. I consider this a good thing. LoL
Sagittarius 88 yea you’re so right. I can’t walk into a 4wheel parts without spending money, my wife hates it lol I want to add the coil over setup next for sure.
@@AndrewNobleOfficial it just barely covers the tip of the gap with the factory ones, not enough to my liking. I think I might get the Husky and cut out the rear shock area.
Thanks for the upload this was pretty helpful as well as one of the comments about the clips being a certain way (big hole on outside). Just got my set of liners from Husky for my 2015. Solid content and happy holidays buddy.
Grant Milbourn no that’s really it. At the time of this install the truck was pretty much brand new too. I don’t think it would be that clean if I got under there right now haha
@@AndrewNobleOfficial They are steel with a galvanized coating. A magnet will stick to the clips. Also it does matter how they are installed as they are intended to have the screw threaded in from one side.
TSB for the off throttle rattle is 18-2354. Had it done on my 18 5.0 but it doesn't fix it, just makes it a little quieter and tries to make it happen less below 1,500 rpm. Not a real fix. Most forums suspect it's the VCT solenoid on the Trans. High pitch whistle Ford claims is the multi-clutch system for the 10-speed and is 'normal' -- I agree with your prior vid that it sounds more throttle related (easy to replicate with repeated throttle blips) and I feel it's definitely not normal. Looks like we are fighting a couple of the same battles lol. Good luck!!
The Anti-Nowhere Lane good info here!! Appreciate the heads up on that!! Keep me updated and I will as well 👍🏽
They look good! On a side note, the metal clips should be flipped around. The big hole in front. All that is holding them in is the little bend at the bottom of the clip. I hope that makes sense for you.
Tom's Dreamshop Worx thank you so much!! 😎
Just bought the same exact liners for my truck, what you really need to do is buy those black insert decals for your tailgate. It would make it look 100 times better :)
Nic nice man I really love the way it changed the look of the truck. Yea I’ve seen some trucks running those and they do look sharp 👌🏽 How are you liking the husky brand? Ever consider getting the floor mats too?
After watching a few install videos on the Husky liners, I opted for the factory ones from Ford. It's a little easier install, and the Ford liners don't cover the rear shock bolt up. This might not be an issue for some people, but I'd rather not be fighting a liner during what should be an easy rear shock replacement. I don't think the Husky's are necessarily bad, but anyone who's installed the Ford liners would probably agree they're worth the extra money.
Sagittarius 88 good to know. I’ve never seen the factory ones on the truck before. Does it get rid of the body/frame gap too? After lifting it was really bad
@@AndrewNobleOfficial I haven't lifted my truck yet, but I'm only planning on doing a leveling kit, most likely going for the Fox 2.0 coilover/shock package. This is one of the reasons I went for the factory liners, because I know those rear shocks are already slated to come off. Off topic, the amount of goodies available for the F150 are seemingly endless. I consider this a good thing. LoL
Sagittarius 88 yea you’re so right. I can’t walk into a 4wheel parts without spending money, my wife hates it lol I want to add the coil over setup next for sure.
@@AndrewNobleOfficial it just barely covers the tip of the gap with the factory ones, not enough to my liking. I think I might get the Husky and cut out the rear shock area.
Lloyd Hendricks yeah that’s what I noticed too. These ones work perfect!
Thanks for the upload this was pretty helpful as well as one of the comments about the clips being a certain way (big hole on outside). Just got my set of liners from Husky for my 2015. Solid content and happy holidays buddy.
Thank you so much man! Happy holidays to you as well!
Nice addition for sure!
One of my favorite mods!
Now for some mud flaps
Lol that’s a tough one!
Lol that’s a tough one!
I just realized your truck fits in the garage. Do you have 7’ tall door?
Yes its a 7' garage. Every time I enter a parking structure that's 7 feet I get so nervous. Even though I know it will fit lol
How do you clean your undercarriage? It looks pristine.
Grant Milbourn now Grant that is a personal question! 🤣 jk jk thank you man. I just be sure to pressure wash under there when it’s dirty.
Hot Wheels Dad hahah do you apply anything to shine it up?
Grant Milbourn no that’s really it. At the time of this install the truck was pretty much brand new too. I don’t think it would be that clean if I got under there right now haha
Could you do a video of you cruising with ur exhaust, love your truck.
Dylan Samreth yea I can do that. Do you want it from both outside and inside? Or are you just looking to hear for any drone?
Both inside and outside but looking for drone primarily
Dylan Samreth okay I’ll do a full exhaust upload focusing primarily on my exhaust setups on my Fords. I’ve been wanting to do that
Dylan Samreth I started making content for this upload. I think you’ll be happy with the sounds. I’ll try and upload soon
I hear some talk about liners and rust..I really want some liners but wanted to know your take or anyone’s about liners and rust
What did you tell or what the dealer diagnosis about the chirp my truck is doing that... where is the noise coming from
I explained to the the TSB-19-2140 and they checked it in their computer. It fixed the problem.
Is 79121 the Amazon item number ? $119.99?
Yes I have them linked in the description 👍🏽
The clips, are they steel or aluminum?
Pretty sure they are aluminum
@@AndrewNobleOfficial They are steel with a galvanized coating. A magnet will stick to the clips. Also it does matter how they are installed as they are intended to have the screw threaded in from one side.
@@lindsaykuzyk5116 thank you for the info!
There only 84$ now
Jeff Sigmon sweet good to know
Mine came with 4 bolts ?