Sears Craftsman Tools Raised Panel Wrench Manufacturer Identification Dates, Codes, and History.
ฝัง
- เผยแพร่เมื่อ 21 พ.ค. 2023
- In this video I provide a brief explanation of the different types of Craftsman raised panel wrench codes. What to look for when buying at estate sales, garage sales, and ebay in order to keep your set matched.
Great reference - alloy-artifacts.org/craftsman-...
=============================================================
Follow The Tool Bandit
Instagram / toolbandit
Facebook / thetoolbandit
=============================================================
#tools #Craftsman #Craftsmantools #CraftsmanUSA #Craftsmanwrenches #raisedpanelwrench #identification #datecodes #manufacturer
![[TH] VCT Pacific Stage 2 - Playoffs Day 3 // DRX vs GEN | PRX vs TLN](http://i.ytimg.com/vi/CWM1Q-2-o3M/mqdefault.jpg)
excellent video and thanks. after watching, i looked at my "first gen" double box end, raised panel wrench (1/2 - 9/16). as stated, and a little FYI, it does have a raised "V" cast (or forged) into the shank. i don't know the exact year or vintage, but i've had this wrench since 1965 and it was well used when i got it. i'm not sure, but it may have been my grandfather's wrench. too many years and the old memory ain't what used to be....
Great info. I would love to see you do Craftsman ratchets and sockets, as well.
I will add that to the list, might be a few months. Thank you for watching!
The Tool Bandit.. New subscriber here. Thanks for showing the History of Craftsman wrenches..
Subbed back! Nice channel, plenty for me to binge watch. Thank you for watching!
Good video, thanks for sharing. I've always had Craftsman and loved them. Now that I have the time I'm starting to actually collect them as well as other brands. Your video will help me.
Glad to hear it. Thank you for watching!
Great video. Very informative. 👍👍
Thank you! Thank you for watching!
Very informative. Thank you.
Thanks for watching!
That's pretty cool I've got a bunch of old craftsman wrenches that aren't chrome-plated they're made of something different when I first started wrenching back in the 80s building up my sets from pawn shops and garage sales LOL
I have some nice sets pre-1945, most are open end. They didn't use plating during war times as far as I know. Thank you for watching!
Great video very informative I have a complete easco set of metric wrenches that I got from a family friend goes all the way up to 32mm and still has the original tool roll I bet it’s worth a pretty penny now a days
I have always liked the EASCO wrenches. I believe they made wrenches for a number of brands. If you have the set up to 32mm they do have some real value! Thanks for watching!
@@thetoolbandit i very much so love the set myself I think the left offset of the front panel sets it apart from the craftsman really nicely definitely going to remain in my toolbox for years to come and I’m pretty sure the napa wrenches of the era were made by easco and I’m sure others
Great video! I just picked up a box of Craftsman wrenches and sockets. It is a 46 piece set. There is no visible date but I'm guessing 1970s.
I'm still doing my homework on them trying to find a date, your video is a big help! I'll post a video once soon. tHanks for the video!
I gave you a sub, will watch for your video. Thank you for watching!
I have a set of the Japanese made wrenches in metric. It was a convenient way to identify my tools vs my dad's and my brother's. I now have a good selection of v, VV, and V^ USA made ones as well.
I guess that is better than engraving them! I wonder if they sold the Japanese made in certain regions or if they sold them all over side by side with the USA made. They seem to be high quality, many Japanese tools are good. China and Taiwan have also come a long way in the last 20 years Thank you for watching!
good info
Thanks for watching!
All My Chraftsman Wrenches were purchased before 1978. From 1978 to 1986 all my wrenches were Snap On, After 1985, I have a plethora of different brands, including Harbor Freight. My set of SAE open end box end wrenches were purchased as a single large set and one of the wrenches has the double vv stamping. If memory serves I purchased that large set in 1974. All the other wrenches in that set have a signle v between a single dash. When I purchased the set i engraved my initials in each wrench so that I could identify my wrenches.
I still have mine from 30 years ago, but have also added a few different sets. Thanks for watching!
I’m a fan of raised panel wrenches.
I used them for decades with no issues. Thank you for watching!
Yep, me too 🔧🔧🔧🔧🔧
I'm late to the party but most of my Craftsman wrenches came from the 70's. Often the raised panel is hard on the hands and my Japan metrics are slightly thinner and more comfortable overall.
Yes, some don't like them for this reason. Thanks for watching!
Thanks man I was going through my wrenches and for Japan ones and one with no part number.
Thanks for watching!
When i buy old wrenches the first thing i do when i get home is put them in the sink get out my can of Bar Keepers Friend and give them a scrub with a tooth brush. They will look almost brand new in about 1 minute with that stuff.
I've used a lot of cleaners but never that one. Do you use the powder or the liquid? I will have to try it. Thank you for watching!
@@thetoolbandit either one will work but i use the powder. Just cleaned up a nice 15/16 wrench i bought this morning. Looks brand new.
Hello! Another big company which produced Sears hand wrenches was Williams tool company. From my understanding they were approached by Sear to manufacturer hand wrenches... Sears bought thousands at a bulk rate to get a low price. Williams agreed, but not with the Williams stamp logo, because Williams was selling to Ma & Pa hardware stores at a higher rate. Hence the Craftsman name was born. I do to dive into the history Craftsman tools, but it is like exploring the inside of a ant hill with all kinds of twist and turns.
First I have heard of the Williams connection but they did go a lot different directions with so many different brands. Thank you for watching!
There are also wrenches with a "WF" on them. For Western Forge, who made them. They were I believe 1990's to early 2000's.
Never seen WF on the raised panel next the "Craftsman" but it may be on another place on the handle. Thanks for watching!
I have the vv with double lines as "Easco, ca." from 1974 - 1989 then "Danaher, ca" from 1990 - 2011
Thanks for the info! I love your screen name! Thanks for watching!
May be wrong but i recall reading the =v= and =vv= were prodiced in the same time frame by moore drop forge but at different facilities.
Very possible. I figured some of the differences are just do to being produced in a different facility. Thanks for watching!
Purchased my first set of Craftsman tools back in 1967 while in high school. They made great dependable good prised tools until they switch to foreign made garbage. Around 1985 I purchased a maybe 85 piece combo action Craftsman set from an add in my bill that only cost $40. Did not find out until they shipped it to me that they were made in Tawain. Quality not as good as earlier USA tools.
Foreign made tools can be good but usually not as good as the tools made in the USA. Thanks for watching!
What are the markings on the 1985 tools? The consensus seems to be that they didn't start using offshore manufacturing until 20+ years later.
@Milkmans_Son your correct, he's probably just losing his memory
I'm not sure on exact year but SK tools made Craftsman wrenches and sockets at their forge plant in Defiance Ohio
I believe they made the polished professional wrenches
And Offset Box Wrenches I own have either a cast in the shank or stamped into the raised panel Cl. Not sure what the manufacturer years woukd be on thise as well ???
CI is Pre-1945, the maker is unknown. Thank you for watching!
Does the dating of the wrenches carry over to thier ratchets and sockets and extensions as well ???
Yes, they all range the same years, although the "newer" socketshave letter codes the wrenches never carried. Thank you for watching!
What does the cast in letter O or letter B or letter N in the shank either at the open end of the shank or at the box end of the shank ???
There is also a VERY noticable ring sound when you tap older wrenches together apposed to the later made wrenches. A lesser grade of steel I assume. Also because especially the box end of the wrench has thicker steel in the casting to be stronger due to a lesser grade of steel !!!???
In general the thought of the "O" and other letters on the shank was more of an internal mark that maybe marked the batch but it is not the makers mark and does not represent a year. Usually steel that rings is high quality, a steel hammer that rings when you hit a nail is good quality steel. The older =V= sockets have a very different sound, the walls seem thinner as well. Thank you for watching!
What about the wrenches with only a single line on each side, as opposed to a double line?
The only ones I have seen like that are usually the very small sizes like 1/4" and 5/16" I believe it is a single line because the wrenches are too small to fit a double line. I don't believe I have seen one any larger with one line. I could be wrong though. Thank you for watching!
It seems Craftsman used a series line for their wrenches as none of them have a year. I purchased sets of wrenches, ratchets, and sockets some time after 2005. The only distinguishing marking on the wrenches besides the name and size is ST.
Never a year mark as far as I know, always a makers mark and then you can find a range. Thanks for watching!
@@thetoolbandit
Thanks for your response. I looked up what ST could mean and it seems mine were made by Stanley Tools who made Craftsman wrenches for the Canadian market.
The =VV= does not have a part number, they should be pre 1968 as well.
Thanks for the info and for watching!
Awesome info
Even the us flag comes from China
I would not be too surprised
Thanks for watching!
Do u have eBay shop ?
I do, I have about 200 raised panel wrenches available, broken down by series. I don't advertise my store here as I try to keep that separate from my TH-cam channel. If you want to email me at thetoolbandit@gmail.com I can give you a link. Thank you for watching!
@@thetoolbandit I am thanks
G?
Not sure I have seen a G series wrench. They have G sockets.
id say 98% of the tools in my tool chests are the ones with -v- on them. I started buying them in 1995 when i started driving.
All (made in the USA) are pretty solid. I collect the oldest and use the newest. Thanks for watching!
Super late to the party. Japanese hand tools are the new made in the USA nowadays. Koken is where it's at. Quality is equal to Snap On IMO. Prices are steep but still cheaper than the tool truck brands.
I have a Koken ratchet and I agree. Many people in the US get hung up on USA made tools but many countries produce high quality tools. Thanks for watching!
Buy American while there's still time.
Thanks for watching!
You keep saying "I dont know"! Why make a video like this?
I said it a number of time when talking about a wrench that I could not find data on. I don't claim to be an expert, so I am happy to say when I am not sure about something. This video was to help people identify what they have so they can match it up when trying to complete a matching set. I was showing the subtle differences in what looks to be the same wrench.
damn bro its just a wrench
True, but some people like a matching set or like history.