I’m starting my own detailing business now. I been used the tornador. And I always knew using one was the best way to detail. But yeah. Wish me luck. I’m subscribing, much love from NY/VA.
great vid bud! I was on the fence about getting compressed air (my Ridgid vac has a solid blow function), but the cleaning gun is a huge win. Great job 👏
These worked great for dog hair, sand and pine needles in carpets. I would have some spare cones. That is what seemed to wear the quickest. This and a steaming device were my go to. Nice video
I’m proud of you even though I never net you but just watched all detail vids. I’m not surprised cause you’re ambitious and you’re got dreams. Do your best to keep Cisco motivated because he’d make a great partner when you open up a detail or mobile business. I know you trust him. You two are brothers who through construction school together 👏🏾👏🏾. Stay blessed D🫡
Those rigid compressors are overrated. 1) It's fucking heavy 2) It's loud, not really quiet 3) Some units won't reach 200psi maybe max 185psi at the reservoir tank 4) When psi drops to 150 at the reservoir, the unit cycles on 5) I only got 7 seconds of continous blown air at 90psi (outlet) before unit kicked it, which means if you are detailing, your unit will be constantly running causing overheating. Even the manual states to cycle machine 5 min on, 5 min off 6) The regulator at the outlet is not fixed at 90psi, it will drop to about 75psi when trigger is pulled. Even when the regulator knob is pushed in. 7) It takes about 21 sec to refill reservoir from 150psi to max psi, but that low number doesn't matter cause your compressor will always be running 8) When compared to porter cable pancake, the rigid is a tad quieter and it reaches 185psi-200psi in about 1:38 min where porter reaches 150psi in 2:08 min. The only benefit I can see is the 5.1 SCFM offered by the rigid. Tornador doesn't mention what SCFM specs to use, it only states the PSI/BAR. So if you want to use a compressor for detailing there might be better and cheaper options. You can get a cheap pancake compressor and not feel as bad if the unit gets damaged cause the rigid is about $350 plus tax.
In order to run this tool u must have 5 gallon air compressor that has 2.5hp motor with a max 5cfm if u dont have those specs plus unit that goes goes 125 psi it junk my compressor has 5.2 gallon tank max psi of 150psi with 3hp oil lube pump plus it has at 40psi 6.5cfm at 90psi has max 6.9cfm
@@premiumlifestyledetails bro it’s been killing me. Everyone says to get a canopy but to me it’s extra liability , I can’t be carrying around concrete buckets to secure that bih 😂
I bought this compressor recently and finally tried this combo, However I have the output psi set to 85, use the tornador gun, tank refills but then the output does not go back to the 85 psi, it is either higher or lower (70-100) even with the knob locked in place. Not sure if it’s user error or not since it’s my first time using a compressor and tornador combo but I’m following the instructions on the manuals. Anyone of my fellow detailers using this combo that has experienced this?
Awesome video, im looking to incorporate air compressor with tornador max to my business, but how long can u run with your setup, before the ridgid compressor needs to refill?
Im looking to add a new compressor. I currently have my old Harbor Freight 3 gallon compressor which doesn't have the power to run a tornador. My question is, how does the cleaning gun work or differ from using a pressure washer/ foam Canon to clean rubber matts?
I believe it differs by using a whole lot less water. The pressure comes from the air, so requires minimal water and cleaning product. Much easier to dry off afterwards, unlike the pressure washer, which saturates everything and can really only be used outside.
Depends on the compressor. The bigger you have, the more reserve air you have. The bigger the motor, the faster it fills.. My 30 gal drops to 80psi after like 10ish min of near constant use @90 psi and runs for about 5 min to get back up to 125. These little guys, like a twin tank or pancake come back on in 3ish minutes. If you're not mobile, you're better off with a bigger compressor.
Can I believe these companies have you buying stuff that you really don't need to clean a car I've been cleaning car since the 80s All these new tools and chemicals Is a waste of money they got you by the balls To buy the latest and greatest in stuff you don't need to clean a damn car
just thinking why putting more equipment into my van? my pressure washer can do that even more efficient than that tool, Tornador $160, air hose and reel $150 plus compressor $350, no thanks!
warning dont buy harbor freight hoses like that one why they will rot and fail within a year and blow they use cheap rubber go with a high quality one pay more than 20 dollars
I’m starting my own detailing business now. I been used the tornador. And I always knew using one was the best way to detail. But yeah. Wish me luck. I’m subscribing, much love from NY/VA.
How's the business going mate?
How’s it going ???
great vid bud! I was on the fence about getting compressed air (my Ridgid vac has a solid blow function), but the cleaning gun is a huge win. Great job 👏
These worked great for dog hair, sand and pine needles in carpets. I would have some spare cones. That is what seemed to wear the quickest. This and a steaming device were my go to. Nice video
Its a free floating barrel design. Little to no contact.
This is the exact set up I have also introduced it to my dad he has been detailing for over 30 years
This is the exact set-up I'm looking to get! Except maybe the air hose...looking to get a less cumbersome one. Lol. Appreciate the video!
I’d be outraged they gave me a used one for new money great vid on the tornadors
I’m proud of you even though I never net you but just watched all detail vids. I’m not surprised cause you’re ambitious and you’re got dreams. Do your best to keep Cisco motivated because he’d make a great partner when you open up a detail or mobile business. I know you trust him. You two are brothers who through construction school together 👏🏾👏🏾. Stay blessed D🫡
Thanks man!! Ahahah you got all that right 💪🏽
Those rigid compressors are overrated. 1) It's fucking heavy 2) It's loud, not really quiet 3) Some units won't reach 200psi maybe max 185psi at the reservoir tank 4) When psi drops to 150 at the reservoir, the unit cycles on 5) I only got 7 seconds of continous blown air at 90psi (outlet) before unit kicked it, which means if you are detailing, your unit will be constantly running causing overheating. Even the manual states to cycle machine 5 min on, 5 min off 6) The regulator at the outlet is not fixed at 90psi, it will drop to about 75psi when trigger is pulled. Even when the regulator knob is pushed in. 7) It takes about 21 sec to refill reservoir from 150psi to max psi, but that low number doesn't matter cause your compressor will always be running 8) When compared to porter cable pancake, the rigid is a tad quieter and it reaches 185psi-200psi in about 1:38 min where porter reaches 150psi in 2:08 min. The only benefit I can see is the 5.1 SCFM offered by the rigid. Tornador doesn't mention what SCFM specs to use, it only states the PSI/BAR. So if you want to use a compressor for detailing there might be better and cheaper options. You can get a cheap pancake compressor and not feel as bad if the unit gets damaged cause the rigid is about $350 plus tax.
Thank you for this comment!!
In order to run this tool u must have 5 gallon air compressor that has 2.5hp motor with a max 5cfm if u dont have those specs plus unit that goes goes 125 psi it junk my compressor has 5.2 gallon tank max psi of 150psi with 3hp oil lube pump plus it has at 40psi 6.5cfm at 90psi has max 6.9cfm
What compressor are you using?
@@01HTKthis air compressor will work. Tornador even recommends it for mobile detailing
????
Thanks for the great review. What's that track in the background?
thank you
How long does it hold the trigger and burst air
is the compressor reliable? Many reviews say it is not.
What air hose do you use? I’ve bought 2 and neither have fitted both the tornadoe gun and compressor.
Other than the tornador, what other attachments are good to have on compressed air? Solid video bro, keep it up!
That blicky got a scope on it
What’s up fellow Oregon detailer ! I operate a mobile van out of Salem. Looks like you are doing pretty well brother congratulations.
Thanks were trying out here! this rain aint it lately!!!
@@premiumlifestyledetails bro it’s been killing me. Everyone says to get a canopy but to me it’s extra liability , I can’t be carrying around concrete buckets to secure that bih 😂
I put a pressure valve on mine for sensitive areas
Nice video! Keep up the work!
What camera are you using?
I bought this compressor recently and finally tried this combo, However I have the output psi set to 85, use the tornador gun, tank refills but then the output does not go back to the 85 psi, it is either higher or lower (70-100) even with the knob locked in place. Not sure if it’s user error or not since it’s my first time using a compressor and tornador combo but I’m following the instructions on the manuals. Anyone of my fellow detailers using this combo that has experienced this?
Awesome video, im looking to incorporate air compressor with tornador max to my business, but how long can u run with your setup, before the ridgid compressor needs to refill?
Where did you get those gallon twist nozzles?
How would you refill the air compressor when it runs out of air
how did it hold up with this same compressor?
Hi one year later
How often do u use it?
Hi. May I ask why you put particle board on your walls? Just pay for aluminum walls, they last longer.
Im looking to add a new compressor. I currently have my old Harbor Freight 3 gallon compressor which doesn't have the power to run a tornador.
My question is, how does the cleaning gun work or differ from using a pressure washer/ foam Canon to clean rubber matts?
I believe it differs by using a whole lot less water. The pressure comes from the air, so requires minimal water and cleaning product. Much easier to dry off afterwards, unlike the pressure washer, which saturates everything and can really only be used outside.
Is that tornador capable of removing old blood and paint stains on clothing?
what cleaning solution did you put in the Max?
What product do you are using ?
Which is better this one or Dewalt 4.5 G D55146? I need the best
What chemicals are you using?
How long does it take too re-build all the air again?
Depends on the compressor. The bigger you have, the more reserve air you have. The bigger the motor, the faster it fills.. My 30 gal drops to 80psi after like 10ish min of near constant use @90 psi and runs for about 5 min to get back up to 125. These little guys, like a twin tank or pancake come back on in 3ish minutes. If you're not mobile, you're better off with a bigger compressor.
The twin tank is best for mobile since it keeps a consistent psi
Great Video / Thanks!!
Did it break yet?
Was it worth it?
Great video. I need to get one of these lol
Good video 📸
Does this stay at 90 psi all day long?
Put a link to your products I'm buying a tornado.
That max is the big brother to the z-020
90psi is where you wanna keep your compressor at.
They must have given you a refurbished one., It still should work like knew.
I ordered 2 tornadoes recently and both were kinda dinged up so I guess it's normal for them to come scuffed lol
ahhh makes sense! its super scratched now after a couple cars ahahaa
It will continue to be normal if nobody calls em out on it. Should at least got a discount.
The body is plastic now ,not aluminum,like the first version,there easy to rebuild,mostly the inner fluid tube.
Dry ice enters the chat
Nice
Can I believe these companies have you buying stuff that you really don't need to clean a car I've been cleaning car since the 80s All these new tools and chemicals Is a waste of money they got you by the balls To buy the latest and greatest in stuff you don't need to clean a damn car
!!! WHEN I WAS A YOUNG WHIPPER SNAPPER !!! 🥱
I agree and succum to it; but, tell you what IMAGE IS EVERYTHING IT IS ALL ABOUT THE LOOK AND ALSO SOMETHINGS SRE USELESS
Don't get that ' was wood ' panels wet.
I want one asap....
Yup 6 years ago I bought it.Old news.
Ooooook, seems 🤔
just thinking why putting more equipment into my van? my pressure washer can do that even more efficient than that tool, Tornador $160, air hose and reel $150 plus compressor $350, no thanks!
It’s used for interior cleaning Detailers have eliminated using brushes because of this tool.
You can use tornador the interior and exterior
Can’t hate it until you try it
It helps by a lot when detailing
warning dont buy harbor freight hoses like that one why they will rot and fail within a year and blow they use cheap rubber go with a high quality one pay more than 20 dollars
It's tornado.
ya know you can just turn over your mats and let the dirt fall out and its faster.
You have to spend aleast 2000 usd
what?
Cordless or nothing
def not used.
Waste money bro
I just used superclan and water
Or steamer
Don’t waste money
tornadoes are useless lol
Does it make any sense to blow debris all over the car
you obviously don't know how to use it. most essential tool next to the steamer