The audio from a music source is recorded first on to the Light 0 Rama software then the construction is done with the lights? Light O Rama will provide the time code once the music is layed down into the software to keep everthing in sync?
You can use an Arduino, a relay board and a custom made outlet board. It is not hard to do and there is a lot of support for it. I am currently trying to do it myself.
@TechTasticDJs if i were to play continuously play music for an extended time with different songs and i had a sequence for each song, would the software automatically play the sequence made for each individual song?
well actually i have seen a controller for about 80 bucks a year or 2 ago at home depot. however you cannot program it to do what you what and it only comes with a few pre made songs there might have been an mp3 hookup not sure but still nothing you can make yourself or extend for more controllers for a more wild show
Is there a maximum length of song you can use, or is it as long as you want? Also if the audio track is stereo, does it play stereo out of this software? Thanks
hey u all i want to buy one of these but the light o rama dudes wont answer some questions. question # 1 do u have to but the songs to make a show or can you use your own???? question#2- how many songs can be put on the basic verison software?? ANY answers will vbe helpful PLEASE HELP!!!
Hello I have one question I just started doing this about a year ago I’m using light O Rama software My light controller is CTB16PC and I’m thinking I want to go with strip lighting to i’m thinking of purchasing a E1.31 controller on the light o Rama I can use red green blue conversion on the same software but I don’t know if I can Daisy chain cat 5 Connected to CTB16PC Controller can you do both on the same networking and my software I have can convert to Red green blue channels do I have to use a different networking on the same computer for the software to run both controllers? Very confusing... thanks lots to learn
Yes you can and I am just saying you can go to sites like holiday coro and get much better deals on controllers and lights also use xlights which is free instead of paying for LOR. Holiday coro sells an actidongle which connects to your RS45 jack on your pixel controller for LOR controllers but if you just buy alphapix ac and alphapix smart rgb controllers its seamless and much cheaper I have used them for 8 years never had a problem that wasn't taken care of directly.
I haven't had the chance to get the equipment and stuff myself, but this is something that I have researched and made designs for. wizard101520, if you want stuff that cheap, it won't work worth anything. The video with the LMFAO song is one of the newer ones. The lights on the trim are Cosmic Color Ribbon. An epic (and expensive) upgrade from his previous years display. Also, just a FYI, his Home Owners Association shut him down by making a "general rule" against displays like this.
I'll be honest. There is a starter setup available online, but it will only run a few hundred lights, and only uses built-in music. For this quality, you'll need this light-o-rama setup. Cool stuff often isn't cheap!
yeah home depot units are not professional units like we use. it's worth the money. the support is top notch and they last a long time. i recommend getting the assembled KIT, you just have to put the wires all on.
Thing that sucks about this is that it takes FOREVER to program lights. The more lights you have, the longer it will take. And if you have RGB’s, it will take even longer
Pessoal, alguém sabe como eu posso comprar esse aparelho estando no Brasil ? Estou com o dinheiro na mão, só falta eu saber como vim dos Estados Unidos, se estiver algum fornecedor que estiver lendo, por favor entre em contato, já faz 3 anos que procuro esse aparelho, acho que deveria ter um revendedor disso aqui no Brasil...Obrigado caso alguém possa me ajudar...
Jackson Fowler he is using the Pixel Controller and Pixel Lights, they are RGB LED lights, it lets you control everything down to color They have normal controllers, which use normal Christmas lights, it allows you to do things like twinkle, fade, etc. With both of them, you can make the lights dance to music
JESUS just to buy a controller is over $200!!!!!!!!!!!!!!!!!!! god where can i buy some for like $50 each and componits are like 15$ each PLEASE CONTACT ME IF ANYONE KNOWS!!!!!!!!!!!!!!!!!!!!!
The audio from a music source is recorded first on to the Light 0 Rama software then the construction is done with the lights? Light O Rama will provide the time code once the music is layed down into the software to keep everthing in sync?
You can use an Arduino, a relay board and a custom made outlet board. It is not hard to do and there is a lot of support for it. I am currently trying to do it myself.
@TechTasticDJs if i were to play continuously play music for an extended time with different songs and i had a sequence for each song, would the software automatically play the sequence made for each individual song?
Any recommendations for per light sequencing, I want to be able to control each pixel/light in a light string. Thanks
I like this video, mistakes and all. It makes it more real, like someone is right there. Mistakes happen.
well actually i have seen a controller for about 80 bucks a year or 2 ago at home depot. however you cannot program it to do what you what and it only comes with a few pre made songs there might have been an mp3 hookup not sure but still nothing you can make yourself or extend for more controllers for a more wild show
Is there a maximum length of song you can use, or is it as long as you want? Also if the audio track is stereo, does it play stereo out of this software? Thanks
hey u all
i want to buy one of these but the light o rama dudes wont answer some questions.
question # 1 do u have to but the songs to make a show or can you use your own????
question#2- how many songs can be put on the basic verison software??
ANY answers will vbe helpful
PLEASE HELP!!!
Hello I have one question I just started doing this about a year ago I’m using light O Rama software My light controller is CTB16PC and I’m thinking I want to go with strip lighting to i’m thinking of purchasing a E1.31 controller on the light o Rama I can use red green blue conversion on the same software but I don’t know if I can Daisy chain cat 5 Connected to CTB16PC Controller can you do both on the same networking and my software I have can convert to Red green blue channels do I have to use a different networking on the same computer for the software to run both controllers? Very confusing... thanks lots to learn
Yes you can and I am just saying you can go to sites like holiday coro and get much better deals on controllers and lights also use xlights which is free instead of paying for LOR. Holiday coro sells an actidongle which connects to your RS45 jack on your pixel controller for LOR controllers but if you just buy alphapix ac and alphapix smart rgb controllers its seamless and much cheaper I have used them for 8 years never had a problem that wasn't taken care of directly.
thanks so much this will help me get started and would you care to share any off your sequences
Are the controller boxes are mechnical realys or soild state triac switches?
Thanks. Ive been doing this for two years now and also have 32. I have one question. Where do you find the best deals on lights,extension cords etc.
I haven't had the chance to get the equipment and stuff myself, but this is something that I have researched and made designs for.
wizard101520, if you want stuff that cheap, it won't work worth anything.
The video with the LMFAO song is one of the newer ones. The lights on the trim are Cosmic Color Ribbon. An epic (and expensive) upgrade from his previous years display. Also, just a FYI, his Home Owners Association shut him down by making a "general rule" against displays like this.
What kind of lights did you use. Christmas lights?
What did u do to broadcast to fm
What does this song called during the sequence
I'll be honest. There is a starter setup available online, but it will only run a few hundred lights, and only uses built-in music. For this quality, you'll need this light-o-rama setup. Cool stuff often isn't cheap!
No part 2 ?
yeah home depot units are not professional units like we use. it's worth the money. the support is top notch and they last a long time. i recommend getting the assembled KIT, you just have to put the wires all on.
Thing that sucks about this is that it takes FOREVER to program lights. The more lights you have, the longer it will take. And if you have RGB’s, it will take even longer
I have never done anything of this sort and this year we are trying to set a light show up could anyone explain to me the process?
you can buy the starter kit from wowlights dot com
How much to start?
Or vixen using a arduino or raspberry pie I’m working on my lights show I tested and looks amazing so far
but this looks like a lot of fun. it's kind of like DIY fireworks shows!
Pessoal, alguém sabe como eu posso comprar esse aparelho estando no Brasil ? Estou com o dinheiro na mão, só falta eu saber como vim dos Estados Unidos, se estiver algum fornecedor que estiver lendo, por favor entre em contato, já faz 3 anos que procuro esse aparelho, acho que deveria ter um revendedor disso aqui no Brasil...Obrigado caso alguém possa me ajudar...
Can you use any type of Christmas lights or no?
Jackson Fowler he is using the Pixel Controller and Pixel Lights, they are RGB LED lights, it lets you control everything down to color
They have normal controllers, which use normal Christmas lights, it allows you to do things like twinkle, fade, etc.
With both of them, you can make the lights dance to music
as long as you want
@TechTasticDJs ok well i can save up some extra money and buy some equipment if its around 150
Nice video RIP Illuminations Reflections
@TechTasticDJs ok ill check it out
thanks
What song is that?
Darude Sandstorm
these are not on/off clacking relays, LOR controllers are fully solid state dimmers using phase controlled triacs, They make NO sound when operating.
This looks like a lot of fun! Thank you for posting this! :)
your desktop reminds me of mine, onlymines worse and ito start using folders to hold everything xD
@TechTasticDJs Please make a very very in depth video for more advanced users of LOR thank you :)
@TechTasticDJs nice. now all i need is a sequence for 400 songs so the nightclubs can pay me 2000$/night for the choreographed lights!!
Can you give me some of your stuff
Next time you intend to create a video, how about getting your files ready first?
dude - your desktop is a disaster
Use a Renard system. Free software and di-it-yourself hardware.
I want to program so I’m watching some vids
If you DON'T put up Christmas lights.....then you DON'T have to take them down. YEA!!!!
Hey can u make a light show for me?
Dance light show
Рабочий стол надо почистить!
JESUS just to buy a controller is over $200!!!!!!!!!!!!!!!!!!! god where can i buy some for like $50 each and componits are like 15$ each PLEASE CONTACT ME IF ANYONE KNOWS!!!!!!!!!!!!!!!!!!!!!
Get Mr christmas
Who saw minecraft
Way to all of a sudden decide to do a video with no preparation or thought process involved at all. 🙄🙄
Lol! He thinks he uses Light-o-Rama to create his displays.....
Get it together.. you're so weird