1300cc Hayabusa in my raptor 700r quad part 1
ฝัง
- เผยแพร่เมื่อ 16 พ.ค. 2024
- part 1 of 1300cc Hayabusa swapping my raptor 700r quad
Play World of Warships here: wo.ws/47orqFG
Thank you World of Warships for sponsoring this video.
During registration use the code HPPYNWYR2024 to receive a huge starter pack including a free ship, 300 Doubloons, 1 million Credits, 7 days of Premium Account time, 1 ship, 3 Santa's Gift containers, the New Year Constellation flag, and 10 New Year Sky camouflages.
Applicable to new users only.
➥ 🔥MERCH: tinyurl.com/w3a947kp
➥MY WELDERS: usaweld.com/?ref=hvpoab1dg65
➥ CUT OFF WHEELS (Code: VASILY 10) tinyurl.com/h44bzwrd
➥ EVOLUTION Power tools (Code: Vasily5) tinyurl.com/3j5kt4pm
➥LASER CUTTING SERVICE: bit.ly/vasilybuilds
➥PATREON: bit.ly/47gB9Pa
➥ SECOND channel: tinyurl.com/yw8csmw8
➥ PAYPAL: tinyurl.com/3vck3jnx
➥ INSTAGRAM: tinyurl.com/yvaujywh
➥ 🎵 Music: tinyurl.com/zze5jz4n
For all inquires email me vasily1fab[at]gmail.com - ยานยนต์และพาหนะ
![ใจดำกับฉันก่อน - วงทัพห้า [Official MV]](http://i.ytimg.com/vi/I48wa4qurAU/mqdefault.jpg)
Play World of Warships here: wo.ws/47orqFG
Thank you World of Warships for sponsoring this video.
During registration use the code HPPYNWYR2024 to receive a huge starter pack including a free ship, 300 Doubloons, 1 million Credits, 7 days of Premium Account time, 1 ship, 3 Santa's Gift containers, the New Year Constellation flag, and 10 New Year Sky camouflages.
Applicable to new users only.
I don't see where you find the time to play video games.🤔👍👋
@@dannyt2885 sponsorship!!!! It's called getting paid. He ain't out here paying for his builds with fairy dust and unicorn farts. Shit cash money to build
glad to see you dislike squatted trucks also. 😂
The Loaded diaper look are for baby's, not trucks😂🇺🇲
Agree 👍
Squatted trucks and SUVs are for fuckboys
How to end a welding debate 😂
That's part made me laugh 😂
I think you have enough room to make two small air boxes for the carbs and have them come out to either side. Then add your filter.
Or an adapter manifold that angles them down a bit. Longer runners will give it a bit more bottom-end with tuning...like it's going to need that. 😂
i love these sick builds man keep it up man
He's definitely doing a longer rear-end.... This would be too wild without it. 😂
The short swing arm will separate the men from the boys. Longer swing arm may separate the heirs from their inheritance🤔. 🤣
The same thought applies to airbags/ seatbelts in car builds👍
@@TSRGarage - The only thing that might come apart after this is done is him and his license.... 😂
Great build 👏🏾 can't wait to see it finished!!
That rear gas tank gonna have some issues when hitting some serious bumps, might hit the rear shock🤷🏻 i think you should’ve tried to fit it in the original place in the front
I had this same problem on a banshee that I acquired
I'd assume he measured it out while he had the suspension fully compressed with the strap, but if not then you have a point.
hes probably gonna turn it into a drag build because he would end up killed if he puts it on the road lol.
Shock won't hit it, but the swing arm sure will. Learned this lesson when welded on a battery box on a dirtbike frame.
It might be OK because the tri z 250 trike as one under the seat I put the comment before I looked at the tank you might be right but it should work out some how
11:51 Weld the gas tank tabs on the side of the gas tank below the rear sub frame, then bolt up to the sub frame.
Happy New Year! Great builds this year. Keep up the awesome work... from your uk fan 😀... they sell tyres over here for high-speed quad conversions. fredworx over here in the uk builds some fantastic converted quads
now this is why i subcribed, do more with Cboytv they will let you build stuff that would be fun wild and maybe deadly. i subbed to you lol worst way to word it but longer with you. but they are awesome people and you letting them rip the cart knowing it could be " evened " hahaha great. Hope you keep building.
3003 is good for sheet metal bending as well .. 6061 can be bent but usually you’ll want to anneal it w a torch before working it poor man’s way is to mark your bend w a black sharpie and burn the mark off the marker will disappear when it’s at the proper temp
With how good you have become doing fab, you could totally pull off a low profile air box or 2..... with how much hp that motor will make, im sure it would be worth sacrificing a few to protect that motor. Especially with your mention of sand dunes 😂. Dope build man
You need to ride with the Cboys!!!!!!!!
Hell yeah dude awesome to see you build this.
Broooo almost 20yrs ago my best friend was building a quad just like this, he was killed in a motorcycle accident and we never got it finished.. always think about the blast it could've been!!✊️🔥✌️💚
Sorry for your loss.I know it doesn't lessen much even after the years.I hope you have a happier new year.
@@bryduhbikeguy thanks bud same to you!!
Nice to see another project you won't finish or will take 3 years to get running.
You can fit a airbox/ pod filters if you wanted to.make a intake out of metal,pvc or rubber tubing
Awesome new project. This quad is going to be so fast. Your channel is very cool and I think you are a great fabricator.
I just ran across your channel. I'M excited to see the finished product. I'm not really into quads or fabrication. I just find it extremely interesting watching someone, who is good at what they do, make something unique.
Respirator with no filter 😆👍
Great stuff dude thanks. I cannot wait to see what you have in Store for 2024. Happy new year
Awesome build!!!
"Except the people who do squatted trucks we gotta take their welders away" hear hear!
Sweet build! Studded tires, ice track and 24 hours of all out racing would test that build out nicely.
bro causally just combined my two dream things
This things badass man
Nice work 😎
*_I have been wonder for quite a few years now.. WHAT TRULY would be the very best motor swap you could possibly implement using the Raptor chassis?!?!_*
*_@ATVSwapGarage has done countless of these!, but in regards to a practical, usable, and overall reliable application.. what would take the cake!?!???_*
*_The KTM Super DUKE 1290 with 180 Hp 140 torque, A Ducati Panigale 1199s engine?.. A smaller, lighter weight (factory fitment like) KTM 890 Duke -R with 130HP!?!?!?!_*
Another insanely awesome build! Keep up the amazing work! Cant wait to see this thing fling sand!
That shot wearing a mask with no filter love it lol
Oops I was wondering why it still smelled 🤣
You are so right about the squatters 😂
hellyea man, i have an r1 engine I've been thinking about putting in my raptor 700. this video makes me want to get this project started asap
Cant wait for part 2!
Absolutely sick, but you should put rags over that head when the valve cover is off when grinding next to it! 🤙🏻
This dude is bad ass man ! I def love the content
What an amazing and creative fabricator. You should open your own custom fab shop!
Its going to awesome, great job
Hell yeah!!
Vasily is hands down my favourite fabricator.
I think you should do a project with grind hard plumbing. With all your brains put together you’d come up with something insane
This thing is going to be awesome! Can’t wait to see you ripping this thing down the road. It’s gonna be bad ass! Have a great new year. Be safe and we’ll see you next year!👍🏼🤩🫡❤️
V, you always do everything right. Even that corner. It teaches us, right? I had to lay down my H1 500 at 1 AM to survive one night. Came into a corner and the Headlight went out. Scary. 🙂😉🤩😍
Love the bicycle handlebars 🤣
Would you consider swap an Hayabusa engine to a Smart Car? It was already done, but without your level of detail on TH-cam. Would make a great daily.
Another monster build.
To do this 100% right, you need to keep the air box! There is much R&D the factory has put into that air box design. Things like it’s, volume, shape, intake hole size and the ram tubes on the throttle bodies. Plus, with each throttle pulse reversion when the intake valve closes, this fuel is captured in the airbox and drawn in by another cylinders.
I been in the motorcycle performance scene and dyno tuning for many years, every bike of modern times that had its airbox removed lost power! And no tuning can get it back and some bike can lose up to 30 hp. Then retuning the fuel to make it run , means now fuel consumption has increased a lot! More fuel and less power.
Find a way to keep the factory air box, modify the top of the frame, or you will have to accept a loss or power and economy.
Most gen 1 hyabusa had 155hp at the rear wheel, with air filter and better exhaust 165 to 170hp rear wheel
With air box removed and retuned the worst I have seen is 125 hours rear wheel and the best was 135hp.
And both were pigs compared to the airbox equiped bikes.
Look at the rather b welding builds with no air box, all pigs !
cool build man
You are an absolute madman. I love it.
your doing great kid.. very inspiring to my younger cousins, they love this..
good ol fashioned do it yourself learning...its great
Techno rap Iron Maiden run to the hills...FREAKY DUDE!!
Perfect for the Faint Hearted ❤ Beautiful Build. I can't wait to see this in action
No bro I totally love your comment about the squatted trucks and taking people's welders away that's like hilarious
This is dope brother
Heck yeah! Another great build! ❤
Freakin SPPPPPPEEEEEDDDDDDDDDD addicted!! You’re crazy Vasily and we’re all here for it!!
Next can you put one of these engines on stand-on electric scooter. One of those you get around cities
To make easier to remove rear tank put tabs on frame and use threaded insert on the tank. That way u could remove bolts and drop tank put the bottom
Vice-versa keeps fuel leaks out of the plans.Good call though.I was thinking Certnuts in the frame, and the tabs not having elbows at the top.
Gday mate happy new year
Happy New Year to you your family and all your subscribers.
Try to weld the tabs at a 90° angle on the tank, It should drop fine i think
Quien pudiese hacer más de un proyecto con motor hayabusa, todos mis respetos
Just leave the tank tabs verticle,and put nutserts in the frame to hold it.Maybe 8-10" stretch for the swing-arm will keep it from flipping?.It's going to want to wheelie, especially with sand paddles.
Damn Vasily is getting swole
Started a similar project I been gathering parts for las cpl years… it’s same but opposite… kinda… using gen1 frame (clean title), low mileage Bking motor(4-5k),raptor 660 front clip,custom steel swingarm (530 chain) end result tagged,registered street quad… will hav all necessary items for DOT approved…
I really need one of these in Montana You can register quads for the roads and i would drive it to work in the summer
You need a 3d printer if you don't already have one. You could design and print out a custom air box that can be formed in and around any space that's available. Obviously you would need a high heat resistant filament and a 3d printer that can use that filament, but it would let you make some awesome custom parts!
this is gonna be sickkk
I would love to see Pete Hager on this thing lol 😂
Yeah, you have soo much room behind and below the carbs, why don't you either just fab down turn intake ports so the carbs are turned down more. Shouldn't be a huge issue. Would be nice to have them turned down more so you have more room around them, etc...
Awesome videos as always 👍👍
great ! your video skills improved
I wish your videos were longer. I hope you blow up so you can do longer videos more often and get more tools
See's insane quad build, thinks that's dangerous... I want one!
Nice job lil brother! Thats gonna be sick! We used to see these all the time in illegal street races down here in NOLA. Never built one though. I've seen Busa quads in the ⅛ mile smoke Ferraris, Lambos, Vetts, muscle cars, you name it. They're hard to beat. Happy new year bro! I hate squatted trucks too! 😂 Like they couldn't afford to do the whole lift kit at once so they just did the front. 🙄
You should open your own fab shop!
Im a welder/fitter myself and cant wait to get my own machines to start on some of my own projects.
epic bro
Yes. Your welds are very melodic. Was that in the key of "A"? For "Aluminum"? 🤣😂😍
I think it was C#! You need to de burr that. Sand it until it's Flat.
Hell ya cool shit dude 😎
I built an R1 Raptor 700 drag quad years ago. You can check it out on my channel. Few things; I used stock fuel pump, all these engines(even Raptor 700) work at the same psi so there’s no point in fabricating a new fuel tank/pump. I kept my oil pan flat like it was in the bike so the oil stayed level in the pan and didn’t need to worry about sucking air. I chopped up a stock airbox using only the velocity stacks and covered in air filter foam, I built my own exhaust and tuned everything with a power commander and autotune. One huge thing was I had to put adjustable a-arms on and adjusted them so I got more rake as it was sketchy af with the stock geometry. Even then I added a steering damper set on the stiffest setting.
Good info. What power commander has the auto tune would u recommend that for this busa? I'm sure it wouldn't be better than a actual tune
@@VasilyBuilds I built it 5yr ago so I used the Power Commander 5 and their autotune module. The thing was there wasn’t anyone who had an ATV dyno in DFW at the time.
Can't wait to hear and see this monster again
Love it buddy! I would not run a 520 stick with the 630 chain I've seen so many break and take out the cases. How much clearance between the rear caliper and gas tank?
Nice change up on content my dude 👌
Just keep your arms and legs inside the ride, Vasily! This one has a high likely quotient to loosen your gazootskis at an inappropriate moment! ON the "depressed saxophone"; have you thought of using less gas? Because, at 3x+, it sounds thoroughly flatulent. Awesome "first drop" for a new project of '24.
damn I thought I was gonna be able to watch this whole series TN look at how long ago it was posted "4hours ago" something Abt these vids make me sleepy I love it lol
Cardboard washer is next level tip
Dude your the man
Jokes on you we don’t need welders to squat our trucks 🤣
The fuel tank could have been bolted sideways instead of down from the top, single tab drop out. No angle just the flat tab. Build a tapped slug if you want out of round bar and drill to fit. Tig weld it in.
Big fan! You and grind hard plumbing only thing i watch
I’ve bought a +5 Tyson drag frame and need it +10-12 if you can help reach out!! Keep up all the hard and QUALITY work BRO!
This is stupid crazy, and I love it. Putting huge engines in small chassis ✔️ "We die like men," but do our engines deserve the same fate... If you ask the engines, they will tell you 🚫no. Figure out a filter for it. I know you can do it. The rings will personally thank you. Another great build 👏
If it's aluminium how you did the welding to hold?
you should do a dirt bike next time
What frequency do you run your welder on aluminum 75?
55-60 the tabs were 120
I would cut the frameto be able to make the airbox fit for sure. It'll run so much better with it. Or if not build an airbox that uses as much of that space behind the engine as possible. Maybe make it so the throttle bodies are actually inside the airbox.
You should get custom graphics named “Hi-Madusa”
Where are the intake
air filters going?
Well done
You NEED air filter on a QUAD! Unless its a street only bike you need to make an intake box with a filter on it, someone can 3d print one up im sure
Check out the Yamaha Apex engine. 4 cylinder, snow mobile engine with factory Turbo. Guys swap them in Rzr's but one in a Quad would be insane.
can you 3d print you an intake pipe that splits off allowing for a filter...
What do you use to bend the tubes