GOD DAMN SON!! this is what i love about cars, with the right parts and planing you could make anything fast. the best part is most people would sleep on this sentra all day! haha love it. this is an official beast!!
If fred builds another one its gonna be sick. I'm in the process of building my full out drag sentra. Should run consistently in the mid 9s or faster. This car is using a b15 sr20 trans. I will be using the much much stronger 6 speed from the 04 spec v. Sleeved block by mazworx and fully built by me. Tuned by me. Everything installed by me. No shops here. That's the way it should be lol.
Thanks man, I feel honored. And yeah my car made quite more than this car and had a broader powerband, Oh and didnt melt a piston from a bad tune. Tune was spot on.
@DALE97DSM dude, its for the water to air intercooler. That is the holding tank for the water. And yeah the dyno was done in 4th gear. the guy just skipped gears on the dyno, No need to put it in all the gears.
i love nissan bro!! my first one was the 89 240sx hatchback..got it for 500.00 and spent probaly 2,000.00 had a dodge cummings ram turbo and intercooler custom made on a ka24e sohc engine..had near 350hp untuned then i sold it..DAMN!
There is snow outside and your all wearing jackets. I wonder what the IAT looked like. 30*F? with what could be methanol injection or an intercooler spray bar? What power could this beast make with 110*F weather? :)
umm.. this one. see when the boost kicks in, its got a lot of power that the front wheels just come loose. but how long does it take to get on the boost after the gas pedal is released? quite along time. (may be 1-2 second, still too long) see the dyno run too, it looks like normal engine until like about 3000 rpm or so..i personally like continuous and early boost better.
the power band is fine for what it is. a fwd drag car needs a bit of lag for traction, if not it'll just spin its ass off. plus a turbo that spools up too quick wont make enough power up top.
so sick but have you guyz thought of just changing the engine block so a 4wd transfer can be mounted and dropping the engine in a nissan pulsar gtir that would be even sicker if u guyz did gud job
I make that power in a B14 WITH A/C & PS & daily drive it 40+ miles daily. What's it doing on a trailer? Does the owner not live near the shop that did the work?
i do believe you are .. mostly right ... sr20 is a 20 valve ... yes this is the sr 16 which once gave the most power per unit of fuel in a n/a engine ... now ferrari holds the title..and i think it was arround 160 hp ... not sure tho
@trd88noz yeah, its a small 2 liter engine with a big turbo.....what exactly do you propose to do to make 665hp? Im sure your immense logic will prove me wrong...
what are the differents on SR20DET or VET ? "VET" was on PULSAR (Sunny GTi) right ? i had a S13 (180sx) but i think the engine is just smoked block is 1 time repaired "with overbore pistons" turbo is upgradet by a Saab 2.3 T25 but i think my engine is gone now
hey im looking fro some advance on the little 16de can it be built to perform are do i need to start looking. the reason is it is in th ecar and i would like to start doing the body i have built many of hot rods but never a import and it is about time lol just looking for some people that use produce and have the in's and out's so i dont waste my time
@91sentra01 well how about a twin turbo? one smaller one bigger. the smaller boost at lower RPM (also boost the bigger one at that point) then the bigger one can kick in afterward,and the smaller can let off by then.. i'm not proving you wrong here but there are other ways to make that much horse on the same motor.
Im pretty sure you meant SR20 > K20 :P But i get the idea thanks for the support! Nissan and Honda are very similar in lots of ways, I personally like Nissan best because of the parts price, and the reliability of the mecanic itself... (not that Honda are unreliable but I had few bad experience with those) :)
Nice work , tryin myself to buy/build a car with a sr20det , a 90 u12 bluebird 85 original k's it's got a bad vac leak and doesn't want too idle , runs and drives mint +most people have no idea what the hell it is , just that its faster than them
14yrs later still come back to this.. B13 on boost is a different game. 🔥
This is such a classic video. Remember watching this when it first came out. Things were better then...
This video still gets me... the sound this car makes on boost is epic!
Still gets me 13 years later
Same 13 years later that second to third is a mf
SENTRAMENTAL . Looks just as good as it did 7 years ago.
Damn I miss these days and these types of videos. Shit is dope. Really was the best of times.
Posted this to my Facebook so long ago. Back to remember how dope the square sentras were.
This is one of the cars that helped inspire me to build my all motor ve back in 2012. Now it's 8/25/2019 and now I want to go Turbo goal is 500whp
So true
the car sounds like an animal................ and JR is a cool ass dude... bump for someone humble in this business!!!!!
GOD DAMN SON!! this is what i love about cars, with the right parts and planing you could make anything fast. the best part is most people would sleep on this sentra all day! haha love it. this is an official beast!!
What trans is this running the sentra trans are glass.
Incredible aceleration! good job!
imagine this awd
nissan pulsar.....
thats is a clean power curve
@redking15ca that's for the intercooler, because the car isn't in the road, is very easly to get overheated.
Well done Junior! Trini representin!
Shiiiiiiiiiiiittttttttt! i think I found my new SE-R Hero! That is one beast of a SE-R you guys built!
got to see this car in person at the maxima dyno meet at jmr, had no idea it was putting down that much power congrats
If fred builds another one its gonna be sick. I'm in the process of building my full out drag sentra. Should run consistently in the mid 9s or faster. This car is using a b15 sr20 trans. I will be using the much much stronger 6 speed from the 04 spec v. Sleeved block by mazworx and fully built by me. Tuned by me. Everything installed by me. No shops here. That's the way it should be lol.
i love the song, everytime i see my b13 that songs pops up in my head
@redking15ca Its whats called a water/ice to air cooler. It creates denser air for better perfomrance.
Thanks man, I feel honored. And yeah my car made quite more than this car and had a broader powerband, Oh and didnt melt a piston from a bad tune. Tune was spot on.
What is the name of the song ?
I wish i can do this in the philippines since we lack performance parts. Nice b13. Its one of my dreams
@x04bluespecx its a sleeper because it doesnt look fast but its a monster. A sleeper is a car that you wouldnt normally expect to be fast, but it is
@DALE97DSM dude, its for the water to air intercooler. That is the holding tank for the water.
And yeah the dyno was done in 4th gear. the guy just skipped gears on the dyno, No need to put it in all the gears.
goodluck with the torque-steer!
i love nissan bro!! my first one was the 89 240sx hatchback..got it for 500.00 and spent probaly 2,000.00 had a dodge cummings ram turbo and intercooler custom made on a ka24e sohc engine..had near 350hp untuned then i sold it..DAMN!
There is snow outside and your all wearing jackets. I wonder what the IAT looked like. 30*F? with what could be methanol injection or an intercooler spray bar? What power could this beast make with 110*F weather? :)
umm.. this one.
see when the boost kicks in, its got a lot of power that the front wheels just come loose. but how long does it take to get on the boost after the gas pedal is released? quite along time. (may be 1-2 second, still too long)
see the dyno run too, it looks like normal engine until like about 3000 rpm or so..i personally like continuous and early boost better.
This is crazy, I want to turbo my sr20de Sentra so bad but I’m still learning and I feel like I’m way too late in the game. mines white too!!
Great!! I have a B 13 just got a Neo VVL ,but I can't get any rear disc breaks.Can I use the rear drums and maybe put bigger rotors in front? Thanks
carbon ceramic drums all round lol
You can get rear disks. look up a b13 nx2000. very common upgrade
1st se-r i've seen with that much pwr,good build
where can i find that exhaust manifold!!?? :)
This car is sending shivers up my spine:)
the power band is fine for what it is. a fwd drag car needs a bit of lag for traction, if not it'll just spin its ass off. plus a turbo that spools up too quick wont make enough power up top.
so sick but have you guyz thought of just changing the engine block so a 4wd transfer can be mounted and dropping the engine in a nissan pulsar gtir that would be even sicker if u guyz did gud job
You know, I never understood the obsession for Sentra's till now. HOLY FUCK!
Was this car ever taken to the track=? i would like to see more videos
will be awesome to see once you get some good weather and some slicks on that beast...
I make that power in a B14 WITH A/C & PS & daily drive it 40+ miles daily. What's it doing on a trailer? Does the owner not live near the shop that did the work?
great car,vvl=best sound ever,we want more videos from the car!!
That thing sounds GODLY!!!!
Are there any more videos of this sleeper looking beast!?
cool car man . were you get bumper side markers from thank you.
i do believe you are .. mostly right ... sr20 is a 20 valve ... yes this is the sr 16 which once gave the most power per unit of fuel in a n/a engine ... now ferrari holds the title..and i think it was arround 160 hp ... not sure tho
love the original SE-R...fast but also enough of a sleeper that the children in hooded shirts won't steal it!
@dosher101 What kind of help are you looking for? Trouble shooting, performance etc.
@trd88noz
yeah, its a small 2 liter engine with a big turbo.....what exactly do you propose to do to make 665hp? Im sure your immense logic will prove me wrong...
I have that same car and i was wondering what all you did and put on it
What turbo did you use ? sounds like it spools really quick on a 4cyl engine
that thing sounds sooooooo mean i need that setup in my spec v
Anybody know the instrumental? Great build!
what are the differents on SR20DET or VET ?
"VET" was on PULSAR (Sunny GTi) right ?
i had a S13 (180sx) but i think the engine is just smoked
block is 1 time repaired "with overbore pistons"
turbo is upgradet by a Saab 2.3 T25
but i think my engine is gone now
that thing a beast what size motor?
are common VE engine parts hard to get in canada?
what size turbo is that & that a creeper no1 would ever expect that otta a lil sentra
nice project.... but need a little more from the car like banning on the limiter, a little launch from from 1st to 5th and pulls!!!
are there more vids of this car?
what ecu did u guys used for tunning
wonder what management is that?
@tuscani456
sr20 det but they almose the same engine form what i know .
the Det turbu is just a little bigger .
hey im looking fro some advance on the little 16de can it be built to perform are do i need to start looking. the reason is it is in th ecar and i would like to start doing the body i have built many of hot rods but never a import and it is about time lol just looking for some people that use produce and have the in's and out's so i dont waste my time
@91sentra01
well how about a twin turbo? one smaller one bigger. the smaller boost at lower RPM (also boost the bigger one at that point) then the bigger one can kick in afterward,and the smaller can let off by then.. i'm not proving you wrong here but there are other ways to make that much horse on the same motor.
How much would it cost to build one of these???
i have the body style that you have on your flier 95 nissan sentra i would like know how hard is it to do a swap to a sr20 cmp and all that stuff
great job,the only bsd thingh its front wheel drive,why dont you turn it 4wd.
did you guys use pulsar GTi-R block ?
Foo is a sr16ve built turbo
What happened with this sentra and the owner??
More videos plz
is there other link to see more videos of this car?
this video just motivate me now
LOL Tame the road, Nice to see b13's still in the project list. Proud owner of one with avenir engine 230 whp is cool for me jajaja.
the SR20 is a 16 valve, the SR16VE is the 20 valve
one cuestion friend what type of engine have the sentra?
Please tell me theres more vids to come on this SE-R!!!!!!! Thats insane VVL Power!
what engine is that?
its deff. not sr20det....
What transmission does that BEAST! have?..It sure aint the stock one!
is it snowing???
@realG319 nissan was is and always be the king of the streets
wich one is better ths sr20det or the sr20ve
this thing is so nuts
@Jraibs Well I'm not asking for me but for a friend who has that car. How about a rough estimate or a price range?
this car use... sr16 neo vvl or sr20 neo vvl??
What's the ice for?
i will like too know if the sr20det turbo manifold can work on d sr16ve ?
@OOHNANA4EVER its a sr20ve its basically got about 170 stock i believe
is that an sr16 head on a sr20 block?
Im pretty sure you meant SR20 > K20 :P But i get the idea thanks for the support! Nissan and Honda are very similar in lots of ways, I personally like Nissan best because of the parts price, and the reliability of the mecanic itself... (not that Honda are unreliable but I had few bad experience with those) :)
by far the best sentra 2.0 there is just wish it was in a b14 sick as hell though
@nly8nchz
It's an SR20VE, a 2.0 liter VVL engine.
Great car and amazing sound!!!!
What trans?
how many rpm? an miles p.h?
Nice work , tryin myself to buy/build a car with a sr20det , a 90 u12 bluebird 85 original k's
it's got a bad vac leak and doesn't want too idle , runs and drives mint +most people have no idea what the hell it is , just that its faster than them
Oh hell yah! Sleepy as fuck, nobody would ever even think that Sentra is packing 670 ponies!
whats the name of this beat, and that car is tough
Can this motor be put in a nissian sentra 97 4 door gxe???????
Yes
whats the song in the background??????
thats a fast little car. makes me wish i still had my 810 wagon with the 280 z motor in it